Setting Oven Controls
•Continuous Bake or Twelve Hour Energy Saving Mode
•Timer
Setting Continuous Bake or 12 Hour Energy Saving
The TIMER 
and FLEX CLEAN 
pads control the Continuous Bake or 12 Hour Energy Saving features. The
oven control has a factory preset
INSTRUCTIONS | PRESS | DISPLAY |
To set the control for Continuous Bake or 12 Hour Energy Saving features:
1.Press and hold 
for 6 seconds or until the control beeps once. (Fig.1). "12h" or "- - h" will appear in the display and the control will beep once.
2.Press 
to switch between the 12 Hour Energy Saving and continuous bake features. Note: "12h" (See Fig. 2) in the display indicates the control is set for 12 Hour Energy Saving feature and "- - h" (See Fig. 3) indicates the control is set for the Continuous Bake feature.
3.Press 
to accept the change (See Fig. 4) display will
return to time of day) or press 
to reject the change.
Setting Timer
for 6 seconds
Fig. 1
| Fig. 2 |
or | Fig. 3 |
Fig. 4
The TIMER 
pad controls the Timer feature. The Timer serves as an extra reminder in the kitchen that will beep when
the set time has run out. The Timer will not START or STOP the cooking process. The Timer feature may be used during any of the other oven control functions. Refer to "Minumum & Maximum Control Pad Settings" on page 18 for time amount settings.
INSTRUCTIONS | PRESS | DISPLAY |
To set the Timer (example for 5 minutes):
1.Press 
. (See Fig. 5).
2.Press the number pads to set the desired time in the display
(example 
). Press 
. The timer will begin a count down. (See Fig. 6).
Note: If 
is not pressed the timer will return to the time of day.
3.When the set time has run out, the clock will sound with 3 long
beeps every 5 seconds until 
is pressed (See Fig. 7).
To cancel the Timer before the set time has run out:
Press 
. The display will return to the time of day.
Fig. 5
Fig. 6
Fig. 7
22