Self- Cleaning
•Setting Flex Clean or Delay Flex Clean
The FLEX CLEAN pad is used to start a
delayed
hours and 50 minutes) by pressing the number keypads .
During the
DO NOT force the oven door open. This can damage the automatic door locking system. Use care when opening the oven door after the
INSTRUCTIONS | PRESS | DISPLAY |
To start an immediate
1.Be sure the clock is set with the correct time of day, the oven is EMPTY and the oven door is closed.
2.Press . "CLEAN" will flash, "3:00" (hours) and the Cooktop locked icon will show in the display (See Fig. 1).
amount of time from (2 hours) through
(4 hours) in one minute increments. You may also skip the time entry and accept the default cleaning time of 3 hours by pressing the START key pad (See Step 3).
3.Press .The "DOOR LOCKED" icon will flash; "CLEAN", Cooktop Lockout icon and the letters "CLn" will remain on in the display (See Fig. 2).
4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the "DOOR LOCKED" indicator light will quit flashing
2:00 thru 4:00 usingFig. 1 number pads
Fig. 2
Fig. 3
NOTE: If the optional delay
and remain on. The Cooktop locked icon will remain on (Fig. 3).
5.Press (See Fig. 4). Enter the desired
time using the number pads (See Fig. 5).
6.Press . "CLn" icon will turn off; "DELAY", "DOOR LOCKED", "CLEAN" and Cooktop locked icons will remain on.
7.The control will calculate forward from the set start time to determine when the
Fig. 4
Fig. 5
Fig. 6
40