Kenmore 970- 6986 manual Setting Oven Controls, Setting Clock, Setting Timer, Add 1 Minute

Page 16

Setting Oven Controls

Setting Clock

When the appliance is first powered up, 12:00 will flash in the display (See Fig. 1). The time of day must first be set before operating the oven.

Fig. 1

Example — To set the clock to 1:30:

1.Press keypad.

2.Enter 1 3 0 using numeric keypads.

3.Press .

Important note:

The clock cannot be changed during any active oven cooking or cleaning function.

Setting Timer

The minute timer allows you to track your cooking times without interfering with the cooking process. The timer may be set from 1 minute up to 11 hours and 59 minutes.

Example — To set the timer for 5 minutes:

1.Press Timer Set/Off keypad.

2.Enter 5 using numeric keypad.

3.Press keypad to start timer.

To cancel the timer when active press Timer Set/Off keypad again.

Important notes:

•The timer does not start or stop the cooking process. It serves as an extra minute timer in the kitchen that will beep when the set time has run out. The timer may be used alone or while using any of the other oven functions.

•The timer will display hours and minutes until 1 hour remains. When less than 1 hour remains, the display will count down in minutes and seconds. Once the timer has less than 1 minute remaining only seconds will display.

•When the timer is active during a cooking process, the minute timer will show in the display. To view the information of any other active oven function, press the keypad once for the other function to view the status.

Add 1 Minute

Use the Add 1 Minute keypad to set additional minutes to the timer. Each press of the keypad will add 1 additional minute. If Add 1 Minute keypad is pressed when the timer is not active, the timer will activate and begin counting down from 1 minute.

Example — To add 2 minutes to the timer:

Press Add 1 Minute keypad twice.

Setting 12 or 24 hour display mode

The clock display mode allows you to choose between 12 or 24 hr modes. The factory preset clock display mode is 12 hours.

Example — To set 12 or 24 hour display mode:

1.Press and hold keypad for 6 seconds.

2.Press Flex Clean keypad to toggle between 12 Hr day or 24 Hr day display modes (See Figs. 2 & 3).

3.Press to accept choice.

Fig. 2

Fig. 3

Changing between continuous bake setting or 12-Hour Energy Saving feature

The oven control has a factory preset built-in 12 Hour Energy Saving feature that will turn off the oven if the oven is left on for more than 12 hours. The control may be programmed to override this feature to continuously bake.

Example — To change between continuous bake or 12- Hour Energy saving feature:

1.Press and hold Timer Set/Off keypad for 6 seconds.

2.Press Flex Clean to toggle between 12 Hour OFF (Fig. 4) or Stay On (Fig. 5) feature.

3.Press to accept choice.

Fig. 4

Fig. 5

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Kenmore Elite Use & Care Guide Guide d’utilisation et d’entretienKenmore Elite Warranty Table of ContentsPlease carefully read and save these instructions Important Safety Instructions Read all instructions before using this applianceTip Over Hazard Save these instructions for future referenceImportant Instructions for Using Your Oven Important Instructions for Using Your Cooktop Product Record Serial Plate Location970 Model No Serial NoRange Features Your electric range features includeTypes of oven racks Air circulation in the ovenTo replace fit oven rack Food type PositionUsing proper cookware Cookware material typesFlat bottom and straight sides Tight fitting lids Important noteBefore Setting Surface Controls Ceramic glass cooktopTurbo Boil Cooktop LockoutCooktop display windows Home CanningSetting Surface Controls Hot Surface indicator lightsSingle radiant elements Do not place aluminum foil or plastic To operate triple radiant surface element Triple radiant element Place cookware on triple element Setting warmer zone control Hot Surface indicator lightWarmer zone recommended heat settings Warm & Ready ZoneOven Control Functions Feature Min. temp. or timeOven control keypads Setting Oven Controls Setting ClockSetting Timer Setting 12 or 24 hour display modeSetting silent or audible control mode Example To set for silent or audible modeTo activate the Oven Lockout feature To cancel the Oven Lockout featureSetting Preheat Setting BakeExample To set Bake with default oven temperature of 350F Example To set Bake for oven temperature of 425FSetting Delay Start Setting Cook TimeWhen the programmed cook time runs out Benefits of the convection bake feature Press Conv Bake keypad To cancel Conv Bake at anytime pressConv Bake Suggestions for Convection bakingConv Roast Conv ConvertSuggestions for Conv Roast Conv Convert may only be used with the Conv Bake functionSuggested broil settings table electric oven BroilExample To set the Cakes or Breads features Proper meat probe placementCakes Breads Meat probePress to cancel cooking at any time Meat probe cont’dMedium 160F 71C Well done 170F 77C Ham-Cook before eatingSetting Slow Cook Some tips for best results when using Slow CookExample To set Slow Cook Position cookware in oven and close oven doorRecipe Recall Warm & HoldExample To set Warm & Hold Using AirGuard feature Example To adjust Accent light brightnessOperating oven lights Accent lightAdjusting oven temperature Restoring factory default settingsExample To restore to factory default settings Press to accept changeSabbath feature for use on the Jewish Sabbath & Holidays Example To turn off the Sabbath feature PressWarm & Ready drawer some models Warmer DrawerArranging warmer drawer rack positions Warmer drawer indicator light Warmer drawer settingsWarmer drawer recommended food settings Food Item Setting Warmer drawer controlsProof Bread To set Proof Bread using warmer drawerWarmer drawer humidity controller Flex Clean Read before starting Flex CleanSetting Flex Clean Example To set Flex Clean to start immediatelyWhen Flex Clean is finished Delayed Start Flex CleanIf it becomes necessary to stop Flex Clean when active Care & Cleaning Cleaning recommendation tableCooktop maintenance Cooktop cleaningCooktop cleaning cont’d Aluminum foil and utensilsReplacing oven lights Do not use the following on the cooktopRemoving and replacing the lift-off oven door Special door care instructionsTo remove oven door To replace oven doorProblem Solution Displays any fault code error Flex Clean does not workClean SectionSurface Care and Cleaning section of this Use & Care GuideAreas of discoloration with metallic Protection Agreements
Top Page Image Contents