Kenmore 970- 6986 Cooktop cleaning cont’d, Aluminum foil and utensils, Replacing oven lights

Page 38

Care & Cleaning

Cooktop cleaning (cont’d)

Do not use the following on the cooktop:

Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads. They may scratch the cooktop, making it more difficult to clean.

Do not use harsh cleaners, such as chlorine bleach, ammonia or oven cleaners, as they may etch or discolor the cooktop.

Do not use dirty sponges, cloths or paper towels, as they can leave soil or lint on the cooktop which can burn and cause discoloration.

Important note:

Damage to the ceramic glass cooktop may occur if you use an abrasive type cleaning pad. Only use cleaning products that have been specifically designed for ceramic glass cooktops.

General cleaning

Refer to the Cleaning recommendation table in the Care & Cleaning section for more detailed information about cleaning specific parts of the range.

Before manually cleaning any part of the range, be sure all controls are turned OFF and the range is COOL. The range may be hot and can cause burns.

Ammonia must be rinsed before operating the oven. Provide adequate ventilation.

Aluminum foil and utensils

NEVER cover any slots, holes or passages in the oven bottom or cover an entire oven rack with materials such as aluminum foil. Aluminum foil linings may trap heat, causing a fire hazard.

Protective Liners — DO NOT USE ALUMINUM FOIL to line the oven bottom. Only use aluminum foil as recommended in this manual. Improper installation of these liners may result in risk of electric shock, or fire.

Aluminum foil - Use of aluminum foil on a hot cooktop can damage the cooktop. Do not use thin aluminum cooking utensils or allow aluminum foil to touch the surface elements under ANY circumstances.

Replacing oven lights

Be sure the range is unplugged and all parts are COOL before replacing oven light. Wear a leather- faced glove for protection against possible broken glass.

Replacing the oven interior light bulb:

1.Turn electrical power off at the main source or unplug the appliance.

2.Remove interior oven light shield (See Fig. 1).

3.Replace bulb with a new T-4 type 40 Watt halogen appliance bulb. Do not allow your fingers to touch the halogen bulb when replacing. This will shorten the life of the new bulb. Use a paper towel to cover the new bulb when installing.

4.Replace glass interior oven light shield.

5.Turn power back on again at the main source (or plug the appliance back in).

6.Be sure to reset the time of day on the clock.

halogen light bulb

light shield

rear oven cavity

Fig. 1

38

Image 38
Contents Kenmore Elite Use & Care Guide Guide d’utilisation et d’entretienPlease carefully read and save these instructions Table of ContentsKenmore Elite Warranty Tip Over Hazard Important Safety InstructionsRead all instructions before using this appliance Save these instructions for future referenceImportant Instructions for Using Your Oven Important Instructions for Using Your Cooktop 970 Product RecordSerial Plate Location Model No Serial NoRange Features Your electric range features includeTo replace fit oven rack Types of oven racksAir circulation in the oven Food type PositionFlat bottom and straight sides Tight fitting lids Using proper cookwareCookware material types Important noteTurbo Boil Before Setting Surface ControlsCeramic glass cooktop Cooktop LockoutCooktop display windows Home CanningSingle radiant elements Setting Surface ControlsHot Surface indicator lights Do not place aluminum foil or plasticPlace cookware on triple element Triple radiant elementTo operate triple radiant surface element Warmer zone recommended heat settings Setting warmer zone controlHot Surface indicator light Warm & Ready ZoneOven control keypads Feature Min. temp. or timeOven Control Functions Setting Timer Setting Oven ControlsSetting Clock Setting 12 or 24 hour display modeTo activate the Oven Lockout feature Setting silent or audible control modeExample To set for silent or audible mode To cancel the Oven Lockout featureExample To set Bake with default oven temperature of 350F Setting PreheatSetting Bake Example To set Bake for oven temperature of 425FWhen the programmed cook time runs out Setting Cook TimeSetting Delay Start Conv Bake Benefits of the convection bake featurePress Conv Bake keypad To cancel Conv Bake at anytime press Suggestions for Convection bakingSuggestions for Conv Roast Conv RoastConv Convert Conv Convert may only be used with the Conv Bake functionSuggested broil settings table electric oven BroilCakes Breads Example To set the Cakes or Breads featuresProper meat probe placement Meat probeMedium 160F 71C Well done 170F 77C Press to cancel cooking at any timeMeat probe cont’d Ham-Cook before eatingExample To set Slow Cook Setting Slow CookSome tips for best results when using Slow Cook Position cookware in oven and close oven doorExample To set Warm & Hold Warm & HoldRecipe Recall Operating oven lights Using AirGuard featureExample To adjust Accent light brightness Accent lightExample To restore to factory default settings Adjusting oven temperatureRestoring factory default settings Press to accept changeSabbath feature for use on the Jewish Sabbath & Holidays Example To turn off the Sabbath feature PressArranging warmer drawer rack positions Warmer DrawerWarm & Ready drawer some models Warmer drawer recommended food settings Food Item Setting Warmer drawer indicator lightWarmer drawer settings Warmer drawer controlsWarmer drawer humidity controller To set Proof Bread using warmer drawerProof Bread Setting Flex Clean Flex CleanRead before starting Flex Clean Example To set Flex Clean to start immediatelyIf it becomes necessary to stop Flex Clean when active Delayed Start Flex CleanWhen Flex Clean is finished Care & Cleaning Cleaning recommendation tableCooktop maintenance Cooktop cleaningReplacing oven lights Cooktop cleaning cont’dAluminum foil and utensils Do not use the following on the cooktopTo remove oven door Removing and replacing the lift-off oven doorSpecial door care instructions To replace oven doorProblem Solution Clean Displays any fault code errorFlex Clean does not work SectionAreas of discoloration with metallic Care and Cleaning section of this Use & Care GuideSurface Protection Agreements