Kenmore 790.4672 manual Consumer Defined Control Features, Nni

Setting Oven Controls (con't)

Consumer Defined Control Features

Setting Temperature Display --Fahrenheit or Celsius:

The BROIL .............. and FLEX CLEAN @pads control the Fahrenheit

oven control can be programmed to display temperatures in Fahrenheit factory to display in Fahrenheit.

or Celsius temperature display modes. The or Celsius. The oven has been preset at the

INSTRUCTIONS PRESS DISPLAY

To change display from Fahrenheit to Celsius or

Celsius to Fahrenheit

1.To tell if the display is set for Fahrenheit or Celsius press Broil

(Figure 1) and hold for 7 seconds; "550 °''will appear and "BROIL" will flash in the display and a beep will sound. If "F" appears, the display is set to show temperatures in Fahrenheit (Figure 2). If "C" appears, the display is set to show temperatures in Celsius (Figure 3).

2. Press _ to switch between Fahrenheit or Celsius display

modes. The display will show either "F" (Figure 2) or "C" (Figure 3).

Broil

for 7seconds

Figure 1

Figure 2

[al

[nni

3.Press START:to accept the change or press ST_ to reject the change.

STARTor Figure 3

20