Kenmore 790.4672 manual Setting Oven Controls COBt, Instructions Press Display

Setting Oven Controls (COB't)

Setting Continuous Bake or 12 Hour Energy Saving

The TIMER @ and FLEX CLEAN @ pads control the Continuous Bake or 12 Hour Energy Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous

Baking.			INSTRUCTIONS				PRESS	DISPLAY
To set the control for Continuous Bake or 12 Hour Energy
Saving		features
1.	Press and hold _			for 7 seconds		(Figure1). After 7 seconds "12h" or"-	for	7	1
	-h" will appear in the display and the control will beep once.						seconds	Figure
							@
2.	Press _		to switch between the 12 Hour Energy Saving and
	continuous bake features. Note: "12h" (Figure 2) in the display indicates
	the control		is set for the 12 Hour Energy Saving mode and "- -h"					Figure	2
	indicates the control is set for the Continuous Bake feature (Figure 3).
							/
3.	Press	START to accept			the change	(Figure 4: display will return to	START
	time of day) or press			_	to reject	the change.	or@	Figure	3

Figure 4

Setting Kitchen Timer

The TIMER _ pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that

will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during any of the other oven control functions. Refer to "Minimum and Maximum Control Pad Settings" for time amount settings.

INSTRUCTIONS PRESS DISPLAY

To set the Kitchen Timer (example: 5 minutes)

1. Press @. .....----will appear and "TIMER" will flash in the display @

(Figure 5).

2.Press the number pads to set the desired time in the display (example

Q ). Press	The time	will begin to count	down	with	"5:00" and G> .................START	Figure 5
"TIMER" will stay	in the display	(Figure 6). Note:	If	is	not

pressed the timer will return to the time of day after 25 seconds.

3. When the set time has		run out, "End" and "TIMER" will show in the	Figure	6
display	(Figure 7). The	clock will sound with 3 beeps every 5 seconds	@
until @	is pressed.
To cancel the Kitchen Timer before the set time has run out			Figure	7
Press _.	The display will return to the time of day.

To Set Add 1 Minute Feature

The @ ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the @ pad is pressed, 1 minute is

added to the Kitchen Timer feature if this feature is already active. If the Kitchen Timer feature is not active and the

pad is pressed, the Kitchen Timer feature will become active and will begin counting down from 1 minute.

18