Kenmore 790.9911 manual Adjusting Oven Temperature, To adjust the oven temperature higher

Oven	Cleaning
FEATURE OVERVIEW
Delayed Self-Clean Cycle (Cont'd.)
	INSTRUCTIONS		PRESS	DISPLAY
Stopping	or Interrupting	a Self-Cleaning	cycle:
If it becomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:
1. Press	_).		®

2.Once the oven has cooled down for approximately 1 HOUR and the "DOOR LOCKED" icon is no longer displayed, the oven

door can then be opened (Fig. A).

Fig. A

NOTE: If your clock is set for normal 12 hour display mode the Delayed Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delayed Self-Clean 12-24 hours in advance see page 17 for instructions to set the control for the 24 hour time of day display mode.

Adjusting Oven Temperature

FEATURE OVERVIEW

The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

Note: The oven temperature adjustments made with this feature wilt not change the Self-Clean cycle temperature.

INSTRUCTIONSPRESS

To adjust the oven temperature higher:

1. Press _ for 6 seconds (Fig. 1).

2.To increase the temperature use the number pads to enter the

	desired	change. (Example 30°F)		_	_	(Fig.	2). The		_	@
	temperature may be increased as much as 35°F (19°C).
3.	Press	I_)	to accept the temperature		change	and	the			I_)
	display	will return to the time of day (Fig. 3). Press					_	to		(_)
	reject the change if necessary.
To	adjust the		oven temperature	lower:
1.	Press	_	for 6 seconds (Fig.4).

2.TO decrease the temperature use the number pads to enter the

desired change- (Example -30°F) @ @ and then _@_

press (_) (Fig. 5). The temperature may be decreased as

much as 35°F (19°C).

3.	Press	(_)	to accept the temperature change and	the	_)
	display	will	return to the time of day (Fig. 6). Press	(_) to	I_

reject the change if necessary.

DISPLAY

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Figure 5

Figure 6

32