Kenmore 790.9911 Electronic Surface Element Control Esec, Available Esec Window Display Settings

Page 8

Setting Surface Controls

FEATURE OVERVIEW

Electronic Surface Element Controls (ESEC)

Available ESEC Display Settings

Hot Surface Indicator Lights

ESEC Lockout Feature (- -)

The Electronic Surface Element Control (ESEC)

 

The Electronic Surface Element Control ("ESEC") feature

Fig. 1

provides a digital display of the radiant surface elements on

 

the cooktop. The ESEC displays in combination with the

 

touch pads are designed to replace the conventional control

 

knob and power level tick mark indicators.

 

In addition your range includes shared radiant element touch

 

pad settings. The "Bridge" element combinations and Triple

 

radiant element settings are also shown in the ESEC display

Fig, 3

windows.

 

Fig. 2

Fig. 4

The available ESEC Window Display Settings

The ESEC control will display heat levels ranging from Hi (Fig. 1) to Lo (Fig. 6) and OFF (Fig. 7) that will display in the ESEC windows. The settings between 9.0 (Fig. 2) and 3.0 (Fig. 3) decrease or increase in increments of .5 (1/2). The settings between 3.0 (Figs. 3 & 4) and 1.0 (Fig. 5) are Simmer settings which decrease or increase in increments of .2 to Lo ( Fig. 6; lowest Simmer setting) for more precise settings at lower heat levels. Use the Recommended Surface Setting Chart (See page 9, Fig. 1) to determine the correct setting for the kind of food you are preparing.

Hot Surface Indicator Lights

After using any of the radiant element positions the cooktop will become very hot. After turning any of these elements OFF, the cooktop will remain HOT for some time. The backguard control monitors the temperature for 5 positions on the cooktop. The "Hot Surface" indicator light (Fig. 8) wilt glow whenever any of the element positions becomes HOT. The Hot Surface indicator light will remain ON while hot and turn OFF once the cooktop has cooled sufficiently (Fig. 9).

Fig, 5

Fig. 7

RIGHT

REAR

HOT SURFACE

Fig, 8

Fig. 6

RIGHT

REAR

P8

Fig, 9

ESEC Lockout Feature ( - - )

The ESEC feature will not operate during a self-clean cycle or when the Oven Lockout feature is active. Whenever the ESEC Lockout feature is active, " - - " will appear in any display window (See Fig. 10. Also refer to the Oven Lockout instructions on page 19).

ESEC PF message

The ESEC wilt display the PF message whenever there has been a power interruption to the appliance. PF wilt appear in the ESEC display windows as shown in Fig. 11. To clear the PF message touch any ON/OFF ESEC control pad to reset and be sure to reset the clock with the correct time of day if necessary. If the PF displays again repeat these steps.

Radiant surface elements may appear to have cooled after they have been turned off. The glass surface may still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently.

Do not place aluminum foil or plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Pothotders, towels or wooden spoons could catch fire if

placed too close to the surface elements.

8

Fig, 10

Fig, 11

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Electric Ran e Contents Important Safety Instructions Tip bracket installationImportant Instructions for Using Your Cooktop Important Instructions for Using Your OvenSelf Cleaning Ovens Important Instructions for Cleaning Your RangeMaster Protection Agreements Canada8OOW6 Setting Surface Controls Feature OverviewAbout the Ceramic Glass Cooktop About the Radiant Surface ElementsAvailable Esec Window Display Settings Esec Lockout FeatureFeature Overview Electronic Surface Element Control EsecTo Operate the Single Radiant Surface Elements Recommended Surface Cooking SettingsOperating Single Radiant Surface Elements Operating the Triple Surface Element To Operate the Triple Surface ElementSize RightOperating the Bridge Surface Element To Operate the Bridge Surface ElementALL +BRIDGE o Left Side HOT SurfaceWarmer Zone Temperature Selection CookingOperating the Warmer Warm & Ready TM Zone To Set the Warmer Zone ControlOperating the Warmer Drawer Surface CookingArranging Warmer Warm & Ready TM Drawer Rack Positions Warmer Drawer Food Temperature Settings To Set the Warmer Drawer & Bread Proofing ControlsPreparing Bread Dough for the Warmer Drawer MEDArranging Oven Racks Before Setting Oven ControlsAir Circulation in the Oven Electronic Oven Control Pad Features Pad SettingsMinimum and Maximum Control MIN. TEMP./TIMEPressdisplay Setting the ClockInstructions Instructions Press Display Setting Kitchen TimerEnergy Saving Consumer Defined Control Features Setting Oven Lockout FeatureTo activate the Oven Lockout feature Setting Temperature Display --Fahrenheit or CelsiusDefined Control Features ConsumerSetting Oven Controls Setting PreheatTo set the Preheat temperature for 350F PreheatBake Setting BakeTo set the Bake Temperature to 350F Setting Timed Bake Press DisplaySetting Oven Controls Setting Delayed Time Bake Enter the desired baking time using the number pads byWhen the set bake time runs out InstructionspressBroiling Times and Searing Grill Setting BroilSet the oven to broil at the default setting 550F Setting the Food Categories Features RecommendedFoods to be Cooked in each CategoryBenefits of Convection Bake Setting Convection BakeTo set the oven for Convection Bake Temperature to 350F To set Serve Warm to turn on automatically Serve WarmOven Cleaning Stopping or Interrupting a Self-Cleaning cycle Instructions Press DisplayIcon To Start the Delayed Self-Clean CycleStart Time Adjust Oven temperature Lower Adjusting Oven TemperatureTo adjust the oven temperature higher Stainless Steel, chrome General Care & CleaningGlass control panel Cleaning Recommendations for the Ceramic Glass Cooktop Plastic or foods with a high sugar contentFor light to moderate soil For heavy, burned on soilCare and Cleaning of Stainless Steel some models To Remove Oven DoorOven Lights To Remove and Replace Warmer Warm & Ready TM DrawerTo Operate the Oven Lights To Replace the Oven LightsPossible CAUSE/SOLUTION Solutions to Common ProblemsOccurrence Meats 15-30 % Poultry unstuffed 20-30 % Foods for Convection Bake pad *Decrease Normal cook time byFoods for Meats pad Decrease Normal cook time byCall anytime, day or night U.S.A. and Canada Au Canada pour service en franaisCanadal

790.9911 specifications

The Kenmore 790.9911 is a versatile and reliable gas range that combines modern technology with practical design to elevate your cooking experience. With its sleek stainless steel finish, it not only complements any kitchen décor but also offers durability for daily use.

One of the main features of the Kenmore 790.9911 is its powerful cooking capacity. The range is equipped with five sealed burners, including a robust 17,000 BTU burner for high-heat searing, making it ideal for a range of cooking techniques. The additional burners each provide varying levels of heat output, allowing for optimal control when preparing everything from delicate sauces to hearty meals. The burners are designed for easy cleanup, preventing spills from reaching the internal components.

A significant technological advancement in the Kenmore 790.9911 is its electronic ignition system, which provides reliable and energy-efficient ignition. This feature eliminates the need for standing pilot lights, ensuring safety and enhanced efficiency. The oven features a convection baking option, distributing heat evenly throughout the oven space for perfect results. Convection fans circulate hot air, allowing dishes to cook faster and more evenly.

The oven capacity is another standout characteristic, with an impressive 5.6 cubic feet of space, making it suitable for cooking multiple dishes at once. The oven has several cooking modes, including bake, broil, and self-clean, simplifying the cooking process and post-cooking cleanup. The self-clean feature enhances convenience, allowing for easy maintenance of the oven's interior.

A modern digital display panel provides intuitive control over cooking settings. It features a timer and temperature settings, enabling precise cooking and baking without guesswork. With added functionality like a delay bake setting, users can schedule their cooking time to match their busy lifestyles.

Safety is not overlooked in the Kenmore 790.9911, as it includes features like burner caps that reduce the risk of flare-ups and an oven door that remains cool to the touch while in use, minimizing potential hazards.

With its combination of power, efficiency, and user-friendly features, the Kenmore 790.9911 is an ideal choice for both novice cooks and seasoned chefs looking to enhance their culinary adventures. Whether you're roasting, baking, or simmering, this gas range delivers performance and reliability expected from a premium kitchen appliance.
Top Page Image Contents