Kenmore Oven Flex Clean Instructions and Elite Stove Manual
Page 32

Flex Clean

Aself-cleaning oven cleans itself with high temperatures (well above normal cooking temperatures) which eliminate soils completely or reduces them to a fine powdered ash you can wipe away aftwerwards with a damp cloth.

The Flex Clean function allows you to set any amout of cleaning time from 2 hours to 4 hours. A 3-hour cleaning time is best used for normal cleaning; 2-hour time for light soils and a 4-hour clean time for heavier stubborn soils.

Read before starting Flex Clean

Be sure to read all the following caution and important statements BEFORE starting a self-clean cycle:

DO NOT leave small children unattended near the appliance. During the self-cleaning cycle, the outside of the range can become very hot to touch and can cause burns.

DO NOT line the oven walls, racks, bottom or any other part of the range with aluminum foil. Doing so will destroy heat distribution, produce poor baking results and cause permanent damage to the oven interior. Aluminum foil will melt to the interior of the oven.

The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any range. Move birds to another well-ventilated room.

DO NOT force the oven door open. This can damage the automatic door locking system.

Use caution when opening the oven door after self-cleaning. The oven may still be VERY HOT and can cause burns. To avoid possible burns stand to the side of the oven when opening the oven door to allow hot air or steam to escape.

Important notes:

•Completely remove ALL OVEN RACKS and ANY

ACCESSORIES FROM OVEN CAVITY to avoid damage to oven racks. If the oven racks are not removed they may discolor.

•Remove ALL items from the oven and cooktop including cookware, utensils and ANY ALUMINUM FOIL. Aluminum foil will not withstand high temperatures from a self-clean cycle and will melt.

•DO NOT use oven cleaners or oven protective coatings in or around any part of the oven interior.

•Clean any soil from the oven frame, the door liner outside the oven door gasket and the small area at the front center of the oven bottom (See Fig. 1). These areas heat sufficiently to burn soil on. Clean using soap and water prior to starting Flex Clean (See Fig. 1).

•Remove any excessive spillovers. Any spills on the oven bottom should be wiped-up and removed before starting a self-clean cycle. To clean, use hot, soapy water and a cloth. Large spillovers can cause heavy smoke or fire when subjected to high temperatures. DO NOT allow food spills with a high sugar or acid content (such as milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface as they may leave a dull spot even after cleaning.

•DO NOT clean the oven door gasket (See Fig. 1). The woven material of the oven door gasket is essential for a good seal. Care should be taken not to rub, damage or remove the gasket. DO NOT use any cleaning materials on the oven door gasket. Doing so could cause damage to the door gasket.

Fig. 1

Setting Flex Clean

Example; to set Flex Clean to start immediately:

1.Be sure the oven is empty and ALL oven racks are removed. Remove all items from the cooktop. Be sure oven door is completely closed.

2.Press Flex Clean key pad for a default 3-hour clean time. After pressing Flex Clean you may accept the default 3-hour clean time by going to step 3.

At this time you may choose a different clean time. The amount of clean time must be within 2 to 4 hours and entered using the numeric keys pads. For example enter 2 0 0 for a 2-hour time or enter 4 0 0 for a 4-hour self- clean time. You may choose a 2 hour 15 minute clean time by entering 2 1 5 (hours and minutes).

3.Press to activate Flex Clean.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Kenmore Elite Use & Care Guide Guía de uso y cuidadaTable of Contents Kenmore Elite Limited WarrantyRead all instructions before using this appliance Save these instructions for future referenceImportant Instructions for Using Your Oven Important Instructions for Using Your Cooktop Product Record Serial Plate Location790 Model No Serial NoTypes of oven racks Air circulation in the ovenBaking layer cakes and cookies with 1 or 2 oven racks Flat handle Oven rack Bottom OffsetBefore Setting Surface Controls Using proper cookwareCookware material types Important noteAbout the radiant surface elements Element On & Hot Surface indicator lightsAbout the ceramic glass cooktop Types of cooktop surface elements Dual or 3 triple element portions together See FigSetting Surface Controls Radiant surface element settingsSingle radiant surface elements To operate the single radiant elementDual radiant surface element To operate the dual radiant elementHeating with inner Small element onlyTriple radiant surface element Heating with Heating 2 Heating with allTurbo Boil feature Home CanningWarm & Ready Zone Setting warmer zone controlWarmer zone recommended food settings Minimum & maximum control settings Feature Min. temp. /time Max. temp. /timeOven Control Functions Oven control keypadsSetting Oven Controls Setting ClockSetting Timer Setting 12 or 24 hour display modeSetting silent or audible control mode Changing oven temperature displaySetting Oven Lockout Setting Preheat Setting BakeExample to set Bake with default oven temperature of 350F Example to set Bake for oven temperature of 425FWhen the programmed cook time runs out Setting Cook TimeSetting Delay Start Suggestions for Convection baking Benefits of the convection bake featureConv Bake Convection Bake Suggestions for Conv Roast Conv RoastConv Convert Suggested broil settings table electric oven BroilProper meat probe placement Meat ProbeTo set meat probe Insert probe tip to center of foodMeat probe cont’d Position cookware in oven and close door Slow CookExample to set Slow Cook Using AirGuard feature Warm & HoldOperating oven light Example to set Warm & HoldPress to accept change Adjusting Oven TemperatureSabbath Feature for use on the Jewish Sabbath & Holidays Press Example to turn off the Sabbath featurePresses of the key pad. This will insure the oven Setting Warmer Drawer Control Warmer drawer recommended settingsWarmer drawer recommended food settings Food Item Setting Warm & Ready drawerWarmer drawer indicator light Setting warmer drawerFlex Clean can not be set when the warmer drawer is active To set warmer drawerFlex Clean Read before starting Flex CleanSetting Flex Clean Example to set Flex Clean to start immediatelyDelayed Start Flex Clean When Flex Clean is finishedIf it becomes necessary to stop Flex Clean when active Restart Flex Clean if neededCare & Cleaning Cleaning recommendation tableCooktop maintenance Cooktop cleaningAluminum foil and utensils Replacing oven lightRemoving and replacing the lift-off oven door Special door care instructionsTo remove oven door To replace oven doorProblem Solution Any F code error Flex Clean does not workSection Element for searingAreas of discoloration with metallic Care and Cleaning section of this Use & Care GuideSurface Protection Agreements Acuerodes de protección Sears Parts & Repair Service Center Your HomeOur Home Canada
Related manuals
Manual 24 pages 50.98 Kb Manual 12 pages 9.04 Kb

790 specifications

The Kenmore 790 series is a versatile and efficient line of kitchen ranges designed to meet the needs of modern home chefs. With a reputation for quality and innovation, Kenmore has ensured that the 790 models are equipped with features that enhance cooking performance, convenience, and safety.

One of the standout characteristics of the Kenmore 790 series is its powerful oven technology. Many models come with True Convection cooking, which utilizes a fan and additional heating element to circulate hot air throughout the oven cavity. This technology promotes even cooking and browning, making it ideal for baking and roasting. Users can enjoy perfectly cooked meals with consistent results.

The Kenmore 790 ranges often feature a variety of cooktop options, including gas burners and electric elements. Models with gas cooktops provide precise temperature control, allowing for quick adjustments during cooking. The burners vary in size and power, accommodating dishes that require low simmering or high-heat searing. For those who prefer electric cooking, induction cooktops are available, providing fast heating and energy efficiency.

Ease of use is another focal point in the design of the Kenmore 790 series. Many models include an intuitive digital control panel that simplifies oven operation, offering features like programmable cooking times and temperature settings. Additionally, the ranges often incorporate self-cleaning options, saving users time and effort in maintaining a clean cooking environment.

Safety features are paramount in the Kenmore 790 series, with options such as oven lockout settings and auto shut-off functions. These features ensure peace of mind while cooking, especially in households with children.

In terms of aesthetics, the Kenmore 790 models present a sleek and modern design. They typically come in a variety of finishes, including stainless steel, allowing them to seamlessly blend with different kitchen styles.

Lastly, energy efficiency is a key consideration in the design of the Kenmore 790 ranges. Many models are Energy Star certified, ensuring that they consume less electricity or gas without compromising performance, thus benefiting both the environment and household budgets.

In summary, the Kenmore 790 series stands out for its array of cooking technologies, safety features, and user-friendly interfaces, making it a reliable choice for anyone looking to elevate their culinary experience at home. Whether for everyday cooking or special occasions, the Kenmore 790 promises to deliver convenience and impressive performance.
Top Page Image Contents