Control Pad Features
Note: The appearance of your oven control may differ slightly from the one the same. Also, push buttons or pads may be shaped differently than those
illustrated below. However, all functions are appearing in this Use and Care Guide•
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various functions of the oven as described below•
FEATURE
INDICATOR
LIGHTS--
These light to
show which feature is in use.
BAKE PAD--Used
to select the bake function.
BROIL
STOP CLEAR |
| Used | to clear | any |
| UP and DOWN | ARROWS PADS | Used along with the | |
function previously | entered | except | the time of | function pads to select oven temperature, cook time, | |||||
day and minute timer. | Press | STOP | CLEAR | to | start time (when | programming an | automatic start | ||
stop cooking. | Also | the | STOP | CLEAR pad is |
| time), time of day, clean time and | minute timer. | ||
used to activate oven I_ckout setting. |
|
|
|
| |||||
|
|
| \ |
|
|
|
|
|
|
| ® |
|
|
|
|
|
|
|
|
| ® |
| ® |
|
| Q Oven | • | ® | |
QPreheat
CLOCK SET PAD Used to set the
time of day.
COOK TIME PAD Used to enter the
length of the baking time.
STOP TIME PAD Used to set the
desired stop time for baking. May be used with COOK TIME to
program a delayed bake cycle,
/
SELECT CLEAN PAD Used to select the Self-
Cleaning cycle. A 2 or
3 hours
may be selected.
Q Doer Locked
I
OVEN, PREHEAT & DOOR LOCK LIGHTS* The "Oven" light will glow each time the oven unit turns on to maintain the set oven temperature. The "Preheat" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "Door Locked" light will flash until the door locks when the
\
TIMER SET/OFF PAD Used to set
or cancel the minute timer. The.............
minute timer does not start or stop ...............
cooking. Also, TIMER SET/OFF Pad ""'
is used to set the Continuous Bake ..................
Featu re.
*Note: The OVEN indicator light on the electronic display wi!l turn ON and OFF when using the Bake feature and during preheati This is normal and indicates that the oven is cycling t0 maintain the selected baking temperaturel Whe n the preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for silent operation• Press and hold _,_,_After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pressed• To return the sound, press and hold' _,,_ again for 7 seconds until the control beeps once.
Note: The control will return to the audible mode after a power outage.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1 Press |
2.Press and hold the A until "HI" appears in the display.
3.Press and hold _il until °F or oC appears in the display.
4.Press the A or V to change °Fto °C or °C to °F.
5.Press any control pad to return to normal operating mode.