Self-Cleaning (cont'd)
Starting the Select Self-Clean Cycle
For satisfactory results, use a 2 hour
To Set the Controls for a Self-Clean Cycle
1.Be sure the clock shows the correct time of day.
2.Press Clean
3.Press the A until "3:00" appears in the display for a 3 hour cycle, or press
V until "2:00" appears in the display for a 2 hour cycle.
. As soon as A or V is released, "CLn" appears in the display.
5.As soon as the controls are set, the motor driven lock will begin to close automatically and the "Door locked" indicator light will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock).
6.The "Door locked" indicator light will glow until the
When the
1.The time of day or "End" will appear in the display window and the "Clean" and "Door locked" light will continue to glow.
2.Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.
3.If "End" is in the display and the Select Clean indicator light remains ON,
press | The time of day will appear in the display. |
NOTE: When the oven is cool, wipe away any residue or powdered ash with a
damp cloth or paper towel.
Stopping or Interrupting a Select Self-Cleaning Cycle
if it becomes necessary to stop or interrupt a
1.Press _.
2.Once the oven has cooled down for about 1 HOUR and the "Door locked" light has gone out, the oven door can be opened.
3.Restart the
To avoid possible
burns use care when opening the oven door after the
DO NOT force the
oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the door after
the
completed. The oven may still be
VERY HOT.
iiil...............
...........ii
15