Kenmore 596.52674200 If required, correct rocking, ¾ hex head driver Refrigeratorby turning rear

)WTOLEYELYOUR

REFRIGERATOR

If your refrigerator requires an ice maker water supply connection, refer to How to Connect the Water Supply (page 10) before leveling your refrigerator.

MATERIALS NEEDED	. If required, correct rocking of
>_ ¾" hex head driver	refrigeratorby turning rear
	adjustmentscrew clockwise to raise
:_ Level
	rocking corner. If doors are
	uneven...

,Remove toe grille and bottom bracket

covers (see previous instructions).	>_ Determinewhich door needs to be
	raised.

,Turn both front adjustmentscrews (A)

clockwise to raise and counter-	>_Turn front roller adjustment screw
clockwise to lower.	clockwise to raise front corner of
	door.

I11

Z

O

m

o

3.Turn both rear adjustmentscrews (B) clockwise to raise and counterclockwise to lower.

. Usinga level, make sure front of refrigeratoris _'4"(6 mm)or Y2bubble higher than back of refrigerator. See leveling step 3 for assistance.

If the refrigerator has reached the limit of its adjustment range, and doors are still not level-lower opposite door by turning roller

adjustment screw counterclockwise.

Check with level to verify Y,"tilt to the back for proper door closure.

>>If refrigerator is aligned and stable, replace toe grille and hinge covers.

11