Kenmore W10215709A manual Replace the Doors and Hinges, Remove the Handles optional, Styles 2

Page 7

Remove the Handles (optional)

Style 1

1.Apply firm pressure with your hand on the face of trim. Slide top trim up and bottom trim down away from handle. Lift trim pieces off shoulder screws. See Graphic 1.

2.Remove handle screws and handles. See Graphic 1.

3.Move refrigerator into place. Replace handles as shown. See Graphic 1.

Styles 2 and 3

1.Apply firm pressure on the handle to slide it up and off of the shoulder screws. See Graphic 1.

2.Move refrigerator into place. Replace handles as shown. See Graphic 1.

Remove the Doors

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

1.Unplug refrigerator or disconnect power.

2.Open both refrigerator doors. Remove the base grille by pulling up on the bottom outside corners. See Graphic 2.

3.Disconnect the water dispenser tubing located behind the base grille on the freezer door side. See Graphic 3.

•Press blue outer ring against the face of fitting and pull the dispenser tubing free.

NOTE: Keep the water tubing connector attached to the tube that runs underneath the freezer. The door cannot be removed if the connector is still attached to the tube that runs through the door hinge.

4.Disconnect the wiring located behind the base grille on the freezer door side. See Graphic 4.

•Remove the wiring clip using a 1/4"hex-head socket wrench.

•Disconnect wiring plugs.

5.Close both doors and keep them closed until you are ready to lift them free from the cabinet.

6.Use a 5/16"hex-head socket wrench to remove the top left hinge screw and cover as shown. See Graphic 5.

7.Remove remaining left hinge screws and hinge as shown. See Graphic 5.

IMPORTANT: Do not remove screw A.

8.Lift freezer door straight up off bottom hinge. See Graphic 6. The water dispenser tubing and wiring remain attached to the freezer door and pull through the bottom left hinge. Be sure to avoid damaging the dispenser tubing and wiring.

g.Remove top right hinge cover and screws as shown. See Graphic 7.

IMPORTANT: Do not remove screw A.

10.Lift the refrigerator door straight up off bottom hinge.

11.It may not be necessary to remove the bottom hinges to move the refrigerator through a doorway. Both bottom hinges have similar construction.

•If necessary, disassemble the hinges as shown. See Graphic 8.

IMPORTANT: To aid in door alignment and closing, there is a shim located between the hinge and the cabinet. When the hinge is removed, the shim may fall out of place. If this occurs, set the shim aside so it can be put back in place when the hinge is reconnected later.

Replace the Doors and Hinges

1.Replace both bottom hinges, if removed. Make sure the shim is between the hinge and cabinet. Tighten screws.

2.Feed the water dispenser tubing and wiring through the bottom left hinge before replacing the freezer door on the hinge. Assistance may be needed.

NOTE: Provide additional support for the doors while the top hinges are being replaced. Do not depend on the door magnets to hold the doors in place while you are working.

3.Align and replace the top left hinge as shown. See Graphic 5. Tighten screws.

4.Replace left hinge cover and screws.

5.Reconnect water dispenser tubing and wiring.

•Push tubing into fitting until it stops and the black mark touches the face of fitting. See Graphic 3.

•Reconnect wiring plugs. Reinstall the wiring clip over the grommets. Tighten screw. See Graphic 4.

6.Replace the refrigerator door by lifting the door onto the bottom right hinge.

7.Align and replace the top right hinge as shown. See Graphic 7. Tighten screws.

8.Replace hinge cover and screws. Tighten screws.

9.Plug into a grounded 3 prong outlet or reconnect power.

Door Closing

1.Place a level inside the refrigerator at the back of the top shelf. See Graphic 9 in "Refrigerator Doors."

2.Locate the leveling screws behind the base grille of the refrigerator on either side.

3.Use a hex-head wrench to adjust the front roller leveling screws until the refrigerator is level. Turn the front roller leveling screw to the right to raise that side of the refrigerator or turn the leveling screw to the left to lower that side. See Graphic 11 in "Refrigerator Doors." Make sure refrigerator is level before proceeding.

4.Check the door alignment after leveling the refrigerator.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents W10215709A Sears Roebuck Co., Hoffman Estates, ILSears Canada Inc., Toronto, Ontario, Canada M5B 2B8 Table of Contents Before You Throw Away Your Old Refrigerator or Freezer Refrigerator SafetyTakeoff the doors Remove the Packaging Installation Instructions08 cm Replace the Base Grille Water PressureTools Needed Remove the Base GrilleRemoval WiringplugsTop Left Hinge Grommets Water Dispenser Tubing ConnectionDoor Closing Replace the Doors and HingesRemove the Handles optional Styles 2Connect to Refrigerator Co sectCoupfing purchased Complete the InstallationStyle Refrigerator USECondition Temperature Adjustment Onhalfoff To Dispense WaterPress a sturdy glass against the water dispenser lever Ice DispenserChanging the Water Filter Locked unlockedFilter Status StatusTurning the Ice Maker On/Off Refrigerator FeaturesTo Remove and Replace a Shelf/Frame Shelves and Shelf Frames0Y£O To Remove and Replace a Shelf in a Metal FrameWne CasiB e Freezer FeaturesFrozen Food Storage Guide Ched oo Bn Door FeaturesOo Raso To Remove and Replace the Bins Drop-In Door Rails To Remove and Replace the RailsTo Remove and Replace the Bin Parts Sangng Refrigerator CareIf You Choose to Turn the Refrigerator Off Before You Leave Upper Freezer LightMoving Sizzling/Gurgling water dripping Refrigerator will not operateDoors are difficult to open Lights do not workIce dispenser will not operate properly Ice maker is not producing ice or not enough iceIce cubes are hollow or small Off-taste, odor or gray color in the iceMaster Protection Agreements Sears Installation ServiceProtection Agreements Dispenser water is not cool enoughWater Filter AccessoriesReplacement Parts Base Grille Water Filter Replacement FilterModel TIKB1/TIRFKB1 Capacity 100 Gallons 379 Liters Performance Data SheetNSF/ANSI Page Ndice Registro DEL Producto Garanta Limitada DE KenmoreSeguridad DEL Refrigerador Exclusibn de garantias implicitas limitacibn de recursosPeligro de Peso Excesivo Instrucciones DE InstalacionAntes de tirar su refrigerador o congelador viejo Peligro de Asfi×iaMtodo de conexi6n a tierra recomendado Limpie su refrigerador antes de usarlo508era NotasSuministro de agua de 6smosis inversa Presibn del aguaQuite la rejilla de la base Nivel Conexi6n dela deldespa= Chadorde agua Bisagra inferiorRejilla de la base Alineaci6n de las Nivelaci6n delantera PuertasLas puertas Quite las manijas opcional EstiloEstilos 2 y Quite las puertas Peligro de Choque EI6ctricoConexibn al refrigerador Cortex o deImportante Tuberfade cobre Son dos nomss ÷s USO DE SU RefrigeradorCondicicn Regulacicn DE LA Temperatura Lock Filter Status TempIM PO Rtante C6mo ajustar los controlesPantalla de temperatura siempre encendida Alarma de puerta entreabiertaCaracteristicas adicionales Produccibn acelerada de hielo Manejo de temperatura SmartSense TMPeligro de Cortaduras OrderEl bloqueo del despachador en algunos modelos ££,seestsso ...........................csUso del despachador sin el cartucho del filtro de agua Cbmo cambiar el filtro de aguaRecuerde De seo y deps to SiieoCbmo quitar y volver a colocar el dep6sito Para encender y apagar la f&brica de hieloPara quitar y volver a colocar el caj6n para carnes frias Estantes deslizables en algunos modelosEl portabotellas/latas a la derecha Tapasdelcaj6nparaverdurasodelcaj6nparaverduras/ carneCon dbedeve u is am Para quitar y volver a colocar las tapas@sto c nab e de a pue de cnge ado CaractersticasS?de congead@ Canasta o ?cp e£ede conge adosRec p entenc /s@be Rec p e s£es de a pue /aRieles calzables de la puerta Para limpiar su refrigerador Cuidado DE SU RefrigeradorSi Ud. decide apagar el refrigerador antes de irse Co tes de SteLuz superior del congelador Luces del caj6n para verdurasEstan encendidos los controles? AsegQrese de que los MudanzaNo funciona Peligro de Cheque EI6ctricoLos cubos de hielo son huecos o peque6os Es dificil abrir las puertasLas luces no funcionan La temperatura esta demasiado calienteEl despachador de hielo se atasca mientras vierte el El despachador de hielo no funciona debidamenteHay fugas de agua del despachador El agua del despachador no estb Io suficientemente friaRefacciones Contratos DE ProteccionModelo T1KB1/T1RFKB1 Capacidad de 100 galones 379 litros Hoja DE Datos DEL RendimientoNorma Page Table DES Matii RES Enregistrement DU Produit Garantie Limiti E KenmoreAvant de jeter votre vieux rfrigrateur ou conglateur SI Curiti DU RI Frigi RateurEnlever les portes de votre vieux rfrigrateur Nettoyage avant Iutilisation Dplacement de votre rfrig6rateurRemarques IM Portant Outillage RequisDes Charnire Enlvement des Portes Suprieure droiteStyle EnlvementReplacer les portes et les charnires Enlever les portesEnlever les poignes facultatif Styles 2 etAligner les portes Raccordement au r6frigrateurRaccordement & une canalisation deau Achever Iinstallation Lji s8ilo des c Utilisation DU RI Frigi RateurCaractristiques supplmentaires Production acclre de gla£ons Ajustement des commandesCommandes du rfrigrateur Condition Ajustement DE LA TempiratureSmartsense Timoin Itat La lampe du distributeur sur certains modulesDistribution de glace Le verrouillage du distributeur sur certains modulesPurge du systme deau aprs le remplacement du filtre Remplacement du filtre eauUtilisation du distributeur sans cartouche de filtre b eau Caracti Ristiques DU RI Frigi Rateur Enlvement et remplacement du bac dentreposageAllumer el 6teindre la machine glagons Le bac Igumes et le tiroir Igumes/viande convertible Pour enlever et rinstaller les tiroirsAjustement du rglage SseGuide dentreposage des viandes Ceta ns mod!t Pour enlever et rinstaller la tabletteRane ou bat de cong i sSi u Suce¢a smode, @Suce¢a ss mod6 Bat ts nc nabeSu.... cea is mod@es Tringles dposes dans la porteNettoyage du rfrigrateur Entretien DU RI Frigi RateurLampes du bac Igumes EdesMpoue, d Lampe de la partie sup6rieure du conglateurDmnagement Les portes ne ferment pas compltement DepannageLe rfrigrateur ne fonctionne pas Le rfrig6rateur est bruyantLes gla£ons sont creux ou petits II existe une accumulation dhumidit6& Iint6rieurLeau contient-elle des min6raux tels que le soufre? De Ieau suinte du distributeur Le distributeur deaune fonctionne pas correctementLeaudu distributeur nestpas assez froide La pression de Ieauest-elle infrieure a 30 Ib/poContrats DE Protection AccessoiresModUle TIKB1/TIRFKB1 Capacite 100 gallons 379 litres Feuille DE Donni ES SUR LA PerformanceDirectives dapplication Paramtres dapprovisionnement en eau HAN Anage

W10215709A specifications

The Kenmore W10215709A is a high-quality refrigerator water filter designed to enhance the taste and safety of drinking water. It is specifically compatible with a range of Kenmore refrigerators that utilize a twist-and-lock filter mechanism. This filter is engineered to reduce contaminants, ensuring that consumers enjoy clean and refreshing water and ice straight from their refrigerator.

One of the main features of the Kenmore W10215709A is its advanced filtration technology. This filter employs a multi-stage filtration process that targets a wide spectrum of harmful substances that can be present in tap water. It effectively reduces chlorine, lead, mercury, and other heavy metals, along with various contaminants that can negatively affect water quality. This results in water that not only tastes better but is also healthier for household consumption.

The Kenmore W10215709A boasts a filter life of about six months, depending on usage and water quality. This means that users can enjoy considerable longevity before needing to replace the filter, providing both convenience and cost-effectiveness. The installation process for this filter is straightforward, featuring a simple twist-and-lock design that allows users to change the filter without any tools. This ease of use ensures that maintaining the filter does not become a cumbersome task and encourages users to prioritize water quality.

This model is also designed with user-friendly indicators in mind. Many compatible refrigerators are equipped with built-in filter change lights that notify users when it is time to replace the filter, making it easy to keep track of filter performance without prior knowledge of water filter maintenance.

In terms of characteristics, the Kenmore W10215709A meets the strict standards set by the NSF, assuring consumers of its efficacy and safety. It offers an environmentally friendly solution, as it minimizes the need for bottled water, promoting a greener lifestyle.

In summary, the Kenmore W10215709A water filter is an excellent choice for Kenmore refrigerator owners. With its advanced filtration capabilities, user-friendly features, and commitment to quality, it ensures that families can enjoy superior water straight from their ice and water dispensers. This filter embodies the blend of convenience and health that modern consumers demand while promoting safer drinking water.
Top Page Image Contents