Toro TWRS Set Temperature Activation Threshold Twrfs models only, Select Temperature Threshold

Page 16

Set Temperature Activation Threshold (TWRFS models only)

The freeze sensor temperature activation threshold is adjustable from 35°F to 45°F or 2°C to 7°C. When the air temperature reaches the threshold setting, the freeze sensor activates the receiver. The Freeze Sensor Status indicator will turn on. The sensor system will return to the Monitor mode when the outside air temperature rises above the sensor threshold temperature.

Select Temperature Threshold

1.Press the Setup button to display Freeze. The display will indicate the current temperature threshold setting. See Figure 16.

Note: The display prompt will begin flashing to indicate the selected feature is adjustable.

2.Press the Adjust button to select the preferred temperature.

Select Temperature Scale

1.Press the Setup button to display °F or °C. The display will indicate the current temperature scale.

2.Press the Adjust button to display the alternate scale.

Congratulations!

Figure 16

Figure 17

Your Wireless RainSensor system installation is complete. Now, to take advantage of the unique Water Conservation feature, review the information on the next page and select the level that best suits your landscape application.

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents User’s Guide Contents Page Getting Started Here’s all there is to itStep Receiver Module Features Installing the Receiver Module Connecting the Receiver Wires Wiring Procedure I sensor-readyWiring Procedure II no sensor feature Normally-open SensorInitial System Test Least of 15 seconds to establish communicationSensor Module Features Installing the Sensor Module 1/4 Washer Freeze Sensor Site Selection Select Temperature Threshold Set Temperature Activation Threshold Twrfs models onlySelect Temperature Scale Page Smart Bypass Feature Water Delay FeatureBattery Strength Display Signal Strength DisplayRefer to Sensor Module Battery Replacement on Dry Out Feature Fail Safe FeatureProlonged Active Mode Loss of communicationSet or Restore the Sensor Address Code Turn the Receiver Module Off and OnSensor Module Battery Replacement Unscrew and remove the bottom cap from the sensor housingSolving Reception Problems TroubleshootingTo improve signal strength Receiver display is blank Sensor module does not activate the receiver at close rangeSpecifications Toro Promise Five-year Limited Warranty FCC ID OF7TWRS
Top Page Image Contents