Toro TWRS manual Smart Bypass Feature, Water Delay Feature

Page 18
Figure 21
Figure 20

Smart Bypass Feature

Pressing the Smart Bypass button switches an active sensor system Off and places it in the Bypass mode. When the sensor is bypassed, the controller resumes automatic watering operations as scheduled.

The Sensor Status indicator and the Bypass display prompt will flash to indicate when the sensor system is in the Bypass mode. See Figure 20.

The Bypass mode will remain in effect until the sensor system automatically resets and returns to the Monitor mode or is manually canceled by pressing the Smart Bypass button again.

Water Delay Feature

The Water Delay feature provides a convenient method of postponing irrigation from 1 to 5 days when rain or freeze conditions are expected. The number of Water Delay days is selected in the Water Delay screen, then activated and canceled by pressing the Smart Bypass button.

1. Press the Setup button to display the Water Delay screen.

2. Press the Adjust button to select 1.0 to 5.0 days. See Figure 21.

• To activate the Water Delay period, press the Smart Bypass button. The number of days remaining in the delay period is alternately displayed. Automatic watering will resume when the display reaches 0.0.

Note: Water Delay can not be activated while the sensor system is in the Active mode.

• Once activated, Water Delay operation can be canceled by pressing the Smart Bypass button.

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents User’s Guide Contents Page Getting Started Here’s all there is to itStep Receiver Module Features Installing the Receiver Module Connecting the Receiver Wires Wiring Procedure I sensor-readyWiring Procedure II no sensor feature Normally-open SensorInitial System Test Least of 15 seconds to establish communicationSensor Module Features Installing the Sensor Module 1/4 Washer Freeze Sensor Site Selection Set Temperature Activation Threshold Twrfs models only Select Temperature ThresholdSelect Temperature Scale Page Smart Bypass Feature Water Delay FeatureSignal Strength Display Battery Strength DisplayRefer to Sensor Module Battery Replacement on Dry Out Feature Fail Safe FeatureProlonged Active Mode Loss of communicationSet or Restore the Sensor Address Code Turn the Receiver Module Off and OnSensor Module Battery Replacement Unscrew and remove the bottom cap from the sensor housingTroubleshooting Solving Reception ProblemsTo improve signal strength Receiver display is blank Sensor module does not activate the receiver at close rangeSpecifications Toro Promise Five-year Limited Warranty FCC ID OF7TWRS
Top Page Image Contents