Toshiba LF414 SAFETY PRECAUTIONS continued, Safety Precautions for Installation and Wiring, Don’T

６Ｆ８Ａ０８７０

SAFETY PRECAUTIONS (continued)

Safety Precautions for Installation and Wiring

CAUTION

„ Install a switch and fuse to isolate the		„ Use an appropriate device to carry and install
LF414/LF600F, LF414/LF610F,		the LF414/LF600F,LF414/LF610F,
LF414/LF620F and LF414 from mains		LF414/LF620F and LF414.
power.	Power supply from mains power		If this product falls to the ground,
	can cause electric shock or		injury, or malfunction of or damage
DO	circuit break-down.	DO	to the product, can be caused.
„ Turn off mains power before		„ Do not modify or disassemble the
conducting wiring work.		LF414/LF600F, LF414/LF610F, LF414/LF620F
		and LF414 unnecessarily.
	Wiring while power is applied		Modifying or disassembling this
	can cause electric shock.		product can cause
DO		DON’T	electric shock, malfunction of or
			damage to this product.

„Turn off mains power before working on „ Ground the LF414/LF600F, LF414/LF610F,

pipes.		LF414/LF620F and LF414 independently from
		power equipment.
		(100 ohm or less ground resistance)
	Working on pipes while power		Operating this product
	is applied can cause		without grounding can cause
DO	electric shock.	DO	electric shock or malfunction.
„ Do not conduct wiring work with bare		Use crimped terminal lugs for the terminal
hands.		board and GND terminal.
	Remaining electric charge		Loose connections can cause
	even if power is turned off can		electric shock, fire from
DON’T	still cause electric shock.	DO	excessive current or system
			malfunction.

„Do not work on piping and wiring with wet hands.

Wet hands may result in electric shock.

DON’T

The label shown left is placed near the terminal board for power supply on the converter.

(A black border and symbol on yellow triangle) Be alert to electric shock.

－ ４ －