Craftsman 917.273062 owner manual Operator Presence System, Blade Removal, Battery

Page 21

TRACTOR

Always observe safety rules when performing any maintenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be ad- justed. (See "TO ADJUST BRAKE" in the Service and Adjustments section of this

manual).

TIRES

Maintain proper air pressure in all tires (See "PRODUCT SPECIFICATIONS" section of this manual).

o Keep tires free of gasoline, oil, or insect control chemicals which can harm

rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may

cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are working properly. If your tractor does not function as described, repair the problem immediately.

o The engine should not start unless the clutch/brake pedal is fully depressed and attachment clutch control is in the disengaged position.

°When the engine is running, any attempt by the operator to leave the seat without first setting the parking

brake should shut off the engine.

When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never

operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be

kept sharp. Replace bent or damaged blades.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.Reassemble hex bolt, lock washer and flat washer in exact order as shown.

5.Tighten bolt securely (27-35 Ft. Lbs.

torque).

IMPORTANT: Blade bolt is grade 8 heat

treated.Mandrel Assembly

Trailing Blade Center

EdgeHole

Flat Washer

Lock Washer

_--Hex Bolt (Grade)*

*A Grade 8 heat treated bolt can be identified by six lines on the bolt head.

TO SHARPEN BLADE

NOTE: We do not recommend sharpen- ing blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and eventual

damage to mower and engine.

The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone bal-

ancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded

portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen

the heavy end until the blade is balanced.

5/8" Bolt or

BLADE REMOVAL

1.Raise mower to highest position to allow access to blades.

2.Remove hex bolt, lock washer and flat washer securing blade.

3.Install new or resharpened blade with trailing edge up towards deck as shown.

Center Hole

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. How-

ever, periodic charging of the battery with an automotive charger will extend its life.

21 ° Keep battery and terminals clean.

Image 21
Contents Icraftsmani Limited 90 DAY Warranty on Battery Limitedtwo Yearwarranty on Craftsman Riding Equipm ENT PartsGeneral Operation I1.SLOPE OperationDo not Ill. Children Page Product Specifications Repair AgreementCustomer Responsibilities Seat Tools Required for Assembly To Remove Tractor fromUnpack Carton Check Battery HOW to SET UP Your TractorInstall Seat Before Removing Tractor from SkidPage Install Mower and Drive Belt Checktire Pressure ChecklistCheck Mower Levelness Check for Proper Position ALL BeltsClutch Disengaged Know Your Tractor HOW to USE Your Tractor To SET Parking BrakeTo Move Forward Backward To Adjust Gauge Wheels To Operate MowerTo Operate on Hills Ments Before Starting the EngineTo Start Engine Automatic Transmission Warm UPPurge Transmission Mowing Tips Lubrication Chart General RecommendationsBefore Each USE Battery Operator Presence SystemBlade Removal Lubrication EngineCleaning Clean AIR ScreenEngine OIL Filter MufflerTo Level Mower Housing To Install MowerSIDE-TO-SIDE Adjustment To Remove MowerMower Drive Belt Installation To Replace Mower Drive BeltMower Drive Belt Removal To Adjust Attachment Clutch To Replace Mower Blade Drive BeltTo Replace Mower Drive Belt To Adjust Brake Belt InstallationBelt Removal To Adjust Steering Wheel Alignment To Adjust Motion Control LeverFront Wheel TOE-INADJUSTMENT Transmission REMOVAL/REPLACE- MentTo Start Engine with a Weak Battery Replacing BatteryTo Remove Wheel for Repairs To Adjust Attachment Lift Spring To Replace Headlight BulbTo Remove Hood and Grill AS Sembly To Adjust Carburetor To Adjust Choke ControlPreliminary Setting Final SettingOther BatteryFuel System Engine OILCorrection Problem CauseChart Troubleshooting ProblemCause Correction Troubleshooting ChartFast SlowPage ELECTa£CkuzcH Schematic Tractor Model Number 917,273062Tractor -- Model Number Electrical KEY Part Description Tractor --MODEL Number ElectricalTractor Model Number 917.273062 Chassis and Enclosures Description Tractor --MODEL Number Chassis and EnclosuresTractor Model Number Ground Drive UNC Tractor --MODEL Number Ground DriveTractor Model Number Steering Steering Tractor -- Model NumberSpark Arrester KIT Tractor Model Number EngineKEY Part EngineKEY Part NO. NO. Description Tractor --MODEL Number Seat AssemblyTractor Model Number Wheels and TiresDecals Tractor -- Model Number Lift Assembly KEY Part NO. NO,DESCRIPTION Tractor Model Number Mower Deck KEY Part NO. NO.DESCRIPTION Tractor --MODEL Number Mower Deck111 KEY Part Description Tractor --MODEL Number TRANSAXLE--MODEL Number 222-3010L144569 Shaft Pump 127148X Swashplate Ylinder HEAD, Valve and Breatherj IGNITION/ELECTRICALJ Blower Housing and Bafflesj Tractor =-MODEL Number Exhaustj HEAD/VALVE/BREATHER Crankcase KEY Part Kohler ENGINE-MODEL Number CV20S, Type Number Tractor --MODEL NUM BERKEY Part NO. NO.DESCRIPTION TRACTOR-- Model NUM BERKohler ENGINE-MODEL Number CV20S, Type Number Page Page Suggested Guide for Sighting Slopes for Safe Operation Get it fixed, at your home or ours

917.273062 specifications

The Craftsman 917.273062 is a high-performance riding lawn mower designed for residential and light commercial use, blending efficiency, power, and ease of operation. This robust machine is ideal for users seeking to maintain larger lawns or properties with varying terrains.

One of the standout features of the Craftsman 917.273062 is its powerful engine. Equipped with a 19.5 horsepower Briggs & Stratton engine, this mower delivers reliable performance, offering ample power to handle thick grass and uneven surfaces. The engine's design ensures smooth operation with reduced noise levels, making mowing more pleasant.

The mower features a 42-inch cutting deck, allowing it to cover vast areas in a single pass. This deck design incorporates a twin-blade system, which enhances cutting efficiency and provides a clean, even cut. The adjustable cutting heights, ranging from 1.5 inches to 4 inches, allow users to customize their mowing experience based on their lawn's specific needs.

For improved maneuverability, the Craftsman 917.273062 features a tight turning radius, enabling users to navigate around obstacles such as trees, flower beds, and garden fixtures with ease. This is particularly advantageous for homeowners with intricate landscapes. The riding mower is also designed with a comfortable, high-back seat, which is ergonomically shaped to provide support and reduce fatigue during prolonged use.

Technologically, the mower includes a user-friendly dashboard that displays essential information, such as fuel level, speed settings, and maintenance reminders. This intuitive interface simplifies operation and helps users manage their mowing tasks effectively.

Another characteristic of the Craftsman 917.273062 is its ease of maintenance. The mower features an accessible cutting deck that makes it simple to clean and maintain the blades, ensuring optimal performance over time. Additionally, the mower is equipped with a fuel-efficient system, reducing the frequency of refueling and minimizing environmental impact.

In summary, the Craftsman 917.273062 combines power, efficiency, and user-friendly design to provide a superior mowing experience. Its combination of a robust engine, versatile cutting deck, ergonomic design, and ease of maintenance makes it a preferred choice for homeowners and landscape enthusiasts alike. Whether for routine lawn care or tackling overgrown areas, the Craftsman 917.273062 proves to be a reliable and effective solution.