Craftsman 917.273062 owner manual Ill. Children

Page 4

Ill. CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the

machine and the mowing activity. Never assume that children will remain where

you last saw them.

. Keep children out of the mowing area and under the watchful care of another

responsible adult.

*Be alert and turn machine off if children enter the area.

. Before and when backing, look behind and down for small children.

°Never carry children. They may fall off and be seriously injured or interfere with safe machine operation.

°Never allow children to operate the machine.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

IV. SERVICE

Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel with the engine running. Allow

engine to cool before refueling. Do not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel container inside where there is an open flame, such as a water heater.

Be sure the area is clear of other

people before mowing. Stop machine if anyone enters the area.

Never carry passengers or children even with the blades off.

Do not mow in reverse unless abso- lutely necessary. Always look down and behind before and while backing.

Never carry children. They may fall off and be seriously injured or interfere with safe machine operation.

Keep children out of the mowing area and under the watchful care of another

responsible

adult.

4

o Never run a machine inside a closed area.

o Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition.

Never tamper with safety devices. Check their proper operation regularly.

Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage. Allow machine to cool before storing.

°Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

Never make adjustments or repairs with the engine running.

Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer's recommended parts, when necessary.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Check brake operation frequently. Adjust and service as required.

Be alert and turn machine off if children enter the area.

*Before and when backing, look behind and down for small children.

,Mow up and down slopes (15 ° Max), not across.

. Remove obstacles such as rocks, tree limbs, etc.

,Watch for holes, ruts, or bumps. Uneven terrain could overturn the

machine. Tall grass can hide obstacles.

Image 4
Contents Icraftsmani Limitedtwo Yearwarranty on Craftsman Riding Equipm ENT Parts Limited 90 DAY Warranty on BatteryI1.SLOPE Operation General OperationDo not Ill. Children Page Repair Agreement Product SpecificationsCustomer Responsibilities Seat To Remove Tractor from Tools Required for AssemblyUnpack Carton HOW to SET UP Your Tractor Check BatteryInstall Seat Before Removing Tractor from SkidPage Install Mower and Drive Belt Checklist Checktire PressureCheck Mower Levelness Check for Proper Position ALL BeltsClutch Disengaged Know Your Tractor To SET Parking Brake HOW to USE Your TractorTo Move Forward Backward To Operate Mower To Adjust Gauge WheelsTo Operate on Hills Before Starting the Engine MentsAutomatic Transmission Warm UP To Start EnginePurge Transmission Mowing Tips General Recommendations Lubrication ChartBefore Each USE Operator Presence System BatteryBlade Removal Engine LubricationClean AIR Screen CleaningEngine OIL Filter MufflerTo Install Mower To Level Mower HousingSIDE-TO-SIDE Adjustment To Remove MowerTo Replace Mower Drive Belt Mower Drive Belt InstallationMower Drive Belt Removal To Replace Mower Blade Drive Belt To Adjust Attachment ClutchTo Replace Mower Drive Belt Belt Installation To Adjust BrakeBelt Removal To Adjust Motion Control Lever To Adjust Steering Wheel AlignmentFront Wheel TOE-INADJUSTMENT Transmission REMOVAL/REPLACE- MentReplacing Battery To Start Engine with a Weak BatteryTo Remove Wheel for Repairs To Replace Headlight Bulb To Adjust Attachment Lift SpringTo Remove Hood and Grill AS Sembly To Adjust Choke Control To Adjust CarburetorPreliminary Setting Final SettingBattery OtherFuel System Engine OILProblem Cause CorrectionTroubleshooting Problem ChartTroubleshooting Chart Cause CorrectionFast SlowPage Schematic Tractor Model Number 917,273062 ELECTa£CkuzcHTractor -- Model Number Electrical Tractor --MODEL Number Electrical KEY Part DescriptionTractor Model Number 917.273062 Chassis and Enclosures Tractor --MODEL Number Chassis and Enclosures DescriptionTractor Model Number Ground Drive Tractor --MODEL Number Ground Drive UNCTractor Model Number Steering Tractor -- Model Number SteeringTractor Model Number Engine Spark Arrester KITEngine KEY PartTractor --MODEL Number Seat Assembly KEY Part NO. NO. DescriptionWheels and Tires Tractor Model NumberDecals Tractor -- Model Number Lift Assembly KEY Part NO. NO,DESCRIPTION Tractor Model Number Mower Deck Tractor --MODEL Number Mower Deck KEY Part NO. NO.DESCRIPTION111 Tractor --MODEL Number TRANSAXLE--MODEL Number 222-3010L KEY Part Description144569 Shaft Pump 127148X Swashplate Ylinder HEAD, Valve and Breatherj IGNITION/ELECTRICALJ Blower Housing and Bafflesj Tractor =-MODEL Number Exhaustj HEAD/VALVE/BREATHER Crankcase KEY Part Tractor --MODEL NUM BER Kohler ENGINE-MODEL Number CV20S, Type NumberTRACTOR-- Model NUM BER KEY Part NO. NO.DESCRIPTIONKohler ENGINE-MODEL Number CV20S, Type Number Page Page Suggested Guide for Sighting Slopes for Safe Operation Get it fixed, at your home or ours

917.273062 specifications

The Craftsman 917.273062 is a high-performance riding lawn mower designed for residential and light commercial use, blending efficiency, power, and ease of operation. This robust machine is ideal for users seeking to maintain larger lawns or properties with varying terrains.

One of the standout features of the Craftsman 917.273062 is its powerful engine. Equipped with a 19.5 horsepower Briggs & Stratton engine, this mower delivers reliable performance, offering ample power to handle thick grass and uneven surfaces. The engine's design ensures smooth operation with reduced noise levels, making mowing more pleasant.

The mower features a 42-inch cutting deck, allowing it to cover vast areas in a single pass. This deck design incorporates a twin-blade system, which enhances cutting efficiency and provides a clean, even cut. The adjustable cutting heights, ranging from 1.5 inches to 4 inches, allow users to customize their mowing experience based on their lawn's specific needs.

For improved maneuverability, the Craftsman 917.273062 features a tight turning radius, enabling users to navigate around obstacles such as trees, flower beds, and garden fixtures with ease. This is particularly advantageous for homeowners with intricate landscapes. The riding mower is also designed with a comfortable, high-back seat, which is ergonomically shaped to provide support and reduce fatigue during prolonged use.

Technologically, the mower includes a user-friendly dashboard that displays essential information, such as fuel level, speed settings, and maintenance reminders. This intuitive interface simplifies operation and helps users manage their mowing tasks effectively.

Another characteristic of the Craftsman 917.273062 is its ease of maintenance. The mower features an accessible cutting deck that makes it simple to clean and maintain the blades, ensuring optimal performance over time. Additionally, the mower is equipped with a fuel-efficient system, reducing the frequency of refueling and minimizing environmental impact.

In summary, the Craftsman 917.273062 combines power, efficiency, and user-friendly design to provide a superior mowing experience. Its combination of a robust engine, versatile cutting deck, ergonomic design, and ease of maintenance makes it a preferred choice for homeowners and landscape enthusiasts alike. Whether for routine lawn care or tackling overgrown areas, the Craftsman 917.273062 proves to be a reliable and effective solution.