Video Cassette | Slope Sheet |
Keys
(2)Keys
Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. Review the video cassette before you begin.
TOOLS REQUIRED FOR
ASSEMBLY
A socket wrench set will make assembly easier, Standard wrench sizes you need are listed below,
(1) | 9/16" wrench | (1) | Pliers |
(1) | 1/2"wrench | (1) | Utility knife |
(1)3/4" socket with drive ratchet
(1)Tire pressure gauge
When right or left hand is mentioned in this manual, it means, from your point of view, when you are in the operating position (seated behind the steering wheel).
TO REMOVE TRACTOR FROM
CARTON
UNPACK CARTON
1.Remove all accessible loose parts and parts cartons from carton.
2.Cut, from top to bottom, along lines on all four corners of carton, and lay panels flat.
3.Remove mower and packing materi- als.
4.Check for any additional loose parts or cartons and remove.
8