Craftsman 917.273062 owner manual To Remove Mower, To Install Mower, To Level Mower Housing

Page 24

_IbCAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

1.Depress clutch/brake pedal fully and set parking brake.

2.Place motion control lever in neutral (N) position.

3.Place attachment clutch in "DISENGAGED" position.

4.Turn ignition key "OFF" and remove key.

5.Make sure the blades and all moving parts have completely stopped.

6.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER

1.Place attachment clutch in "DISEN- GAGED" position.

2.Turn height adjustment knob to lowest setting.

3.Lower mower to its lowest position.

4.Remove retainer spring holding anti- swaybar to chassis bracket and disengage anti-swaybar from bracket.

5.Remove retainer springs from suspension arms at deck and disen- gage arms from deck.

6.Raise attachment lift to its highest position.

7.Remove two retainer springs from each front link and remove links.

8.Slide mower forward and remove belt from electric clutch pulley.

9.Slide mower out from under right side of tractor.

IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links.

TO INSTALL MOWER

Follow procedure described in "INSTALL MOWER AND DRIVE BELT" in the

Assembly section of this manual.

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure

tires are properly inflated (See "PROD- UCT SPECIFICATIONS" section of this

manual). If tires are over or

underinflated, you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT

•Raise mower to its highest position.

•Measure height from bottom edge of mower to ground level at front corners of mower, Distance "A" on both sides

 

of mower should be the same.

Adjustment

Front

 

Suspension

 

Lift

Electric

Bracket \

Links

Clutch

 

Suspension

 

 

Arms

Front

 

Chassis

Front

 

 

pension

 

Bracket

Spring

 

Retainer

Anti-Sway Bar

Springs

 

Reta

Front M'_wer Bracket

Spring

 

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Icraftsmani Limitedtwo Yearwarranty on Craftsman Riding Equipm ENT Parts Limited 90 DAY Warranty on BatteryGeneral Operation I1.SLOPE OperationDo not Ill. Children Page Product Specifications Repair AgreementCustomer Responsibilities Seat Tools Required for Assembly To Remove Tractor fromUnpack Carton HOW to SET UP Your Tractor Check BatteryInstall Seat Before Removing Tractor from SkidPage Install Mower and Drive Belt Checklist Checktire PressureCheck Mower Levelness Check for Proper Position ALL BeltsClutch Disengaged Know Your Tractor HOW to USE Your Tractor To SET Parking BrakeTo Move Forward Backward To Adjust Gauge Wheels To Operate MowerTo Operate on Hills Before Starting the Engine MentsTo Start Engine Automatic Transmission Warm UPPurge Transmission Mowing Tips Lubrication Chart General RecommendationsBefore Each USE Battery Operator Presence SystemBlade Removal Engine LubricationClean AIR Screen CleaningEngine OIL Filter MufflerTo Install Mower To Level Mower HousingSIDE-TO-SIDE Adjustment To Remove MowerMower Drive Belt Installation To Replace Mower Drive BeltMower Drive Belt Removal To Adjust Attachment Clutch To Replace Mower Blade Drive BeltTo Replace Mower Drive Belt To Adjust Brake Belt InstallationBelt Removal To Adjust Motion Control Lever To Adjust Steering Wheel AlignmentFront Wheel TOE-INADJUSTMENT Transmission REMOVAL/REPLACE- MentTo Start Engine with a Weak Battery Replacing BatteryTo Remove Wheel for Repairs To Adjust Attachment Lift Spring To Replace Headlight BulbTo Remove Hood and Grill AS Sembly To Adjust Choke Control To Adjust CarburetorPreliminary Setting Final SettingBattery OtherFuel System Engine OILProblem Cause CorrectionTroubleshooting Problem ChartTroubleshooting Chart Cause CorrectionFast SlowPage Schematic Tractor Model Number 917,273062 ELECTa£CkuzcHTractor -- Model Number Electrical Tractor --MODEL Number Electrical KEY Part DescriptionTractor Model Number 917.273062 Chassis and Enclosures Tractor --MODEL Number Chassis and Enclosures DescriptionTractor Model Number Ground Drive Tractor --MODEL Number Ground Drive UNCTractor Model Number Steering Tractor -- Model Number SteeringTractor Model Number Engine Spark Arrester KITEngine KEY PartTractor --MODEL Number Seat Assembly KEY Part NO. NO. DescriptionTractor Model Number Wheels and TiresDecals Tractor -- Model Number Lift Assembly KEY Part NO. NO,DESCRIPTION Tractor Model Number Mower Deck Tractor --MODEL Number Mower Deck KEY Part NO. NO.DESCRIPTION111 Tractor --MODEL Number TRANSAXLE--MODEL Number 222-3010L KEY Part Description144569 Shaft Pump 127148X Swashplate Ylinder HEAD, Valve and Breatherj IGNITION/ELECTRICALJ Blower Housing and Bafflesj Tractor =-MODEL Number Exhaustj HEAD/VALVE/BREATHER Crankcase KEY Part Tractor --MODEL NUM BER Kohler ENGINE-MODEL Number CV20S, Type NumberTRACTOR-- Model NUM BER KEY Part NO. NO.DESCRIPTIONKohler ENGINE-MODEL Number CV20S, Type Number Page Page Suggested Guide for Sighting Slopes for Safe Operation Get it fixed, at your home or ours

917.273062 specifications

The Craftsman 917.273062 is a high-performance riding lawn mower designed for residential and light commercial use, blending efficiency, power, and ease of operation. This robust machine is ideal for users seeking to maintain larger lawns or properties with varying terrains.

One of the standout features of the Craftsman 917.273062 is its powerful engine. Equipped with a 19.5 horsepower Briggs & Stratton engine, this mower delivers reliable performance, offering ample power to handle thick grass and uneven surfaces. The engine's design ensures smooth operation with reduced noise levels, making mowing more pleasant.

The mower features a 42-inch cutting deck, allowing it to cover vast areas in a single pass. This deck design incorporates a twin-blade system, which enhances cutting efficiency and provides a clean, even cut. The adjustable cutting heights, ranging from 1.5 inches to 4 inches, allow users to customize their mowing experience based on their lawn's specific needs.

For improved maneuverability, the Craftsman 917.273062 features a tight turning radius, enabling users to navigate around obstacles such as trees, flower beds, and garden fixtures with ease. This is particularly advantageous for homeowners with intricate landscapes. The riding mower is also designed with a comfortable, high-back seat, which is ergonomically shaped to provide support and reduce fatigue during prolonged use.

Technologically, the mower includes a user-friendly dashboard that displays essential information, such as fuel level, speed settings, and maintenance reminders. This intuitive interface simplifies operation and helps users manage their mowing tasks effectively.

Another characteristic of the Craftsman 917.273062 is its ease of maintenance. The mower features an accessible cutting deck that makes it simple to clean and maintain the blades, ensuring optimal performance over time. Additionally, the mower is equipped with a fuel-efficient system, reducing the frequency of refueling and minimizing environmental impact.

In summary, the Craftsman 917.273062 combines power, efficiency, and user-friendly design to provide a superior mowing experience. Its combination of a robust engine, versatile cutting deck, ergonomic design, and ease of maintenance makes it a preferred choice for homeowners and landscape enthusiasts alike. Whether for routine lawn care or tackling overgrown areas, the Craftsman 917.273062 proves to be a reliable and effective solution.
Top Page Image Contents