Craftsman 917.273062 Before Removing Tractor from Skid, HOW to SET UP Your Tractor, Check Battery

Page 9

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL

1.Remove hex bolt, lock washer and large flat washer from steering shaft.

2.Position front wheels of the tractor so

they are pointing straight forward.

3.Slide the steering sleeve over the steering shaft.

4.Align tabs and press steering sleeve extension into bottom of steering wheel.

5.Position steering wheel so cross bars are horizontal (left to right) and slide onto steering wheel adapter.

6.Secure steering wheel to steering shaft with hex bolt, lock washer and

large flat washer previously removed. Tighten securely.

7.Snap steering wheel insert into

center of steering wheel.

8.Remove protective materials from tractor hood and grill.

IMPORTANT: Check for and remove any

staples in skid that may puncture tires where tractor is to roll off skid.

 

_'-..._J_

Wheel Insert

_

_---_

Steering

 

_--

Hex Bolt

 

 

Lock Washer

. .

_

Large Flat

S_eenng

f_-

 

 

.

el

Steering

Sleeve __:=,_Tabs

ExtensionI

Steering Shaft

Steering

Sleeve

HOW TO SET UP YOUR TRACTOR

CHECK BATTERY

1. Lift hood to raised position.

NOTE: If this battery is put into service after month and year indicated on label

(label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instructions).

Label

INSTALL SEAT

Adjust seat before tightening adjustment knob.

1.Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

2.Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

3.Place seat on seat pan and assemble shoulder bolt. Tighten shoulder bolt securely.

4.Assemble adjustment knob and flat washer loosely. Do not tighten.

5.Lower seat into operating position and sit on seat.

6.Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

7.Get off seat without moving its adjusted position.

8.Raise seat and tighten adjustment knob securely.

Seat Pan

Shoulder

Adjustment

Knob

NOTE: You may now roll or drive your

tractor off the skid. Follow the appropriate instruction below to remove the tractor

from the skid.

9

Image 9
Contents Icraftsmani Limited 90 DAY Warranty on Battery Limitedtwo Yearwarranty on Craftsman Riding Equipm ENT PartsGeneral Operation I1.SLOPE OperationDo not Ill. Children Page Product Specifications Repair AgreementCustomer Responsibilities Seat Tools Required for Assembly To Remove Tractor fromUnpack Carton Check Battery HOW to SET UP Your TractorInstall Seat Before Removing Tractor from SkidPage Install Mower and Drive Belt Checktire Pressure ChecklistCheck Mower Levelness Check for Proper Position ALL BeltsClutch Disengaged Know Your Tractor HOW to USE Your Tractor To SET Parking BrakeTo Move Forward Backward To Adjust Gauge Wheels To Operate MowerTo Operate on Hills Ments Before Starting the EngineTo Start Engine Automatic Transmission Warm UPPurge Transmission Mowing Tips Lubrication Chart General RecommendationsBefore Each USE Battery Operator Presence SystemBlade Removal Lubrication EngineCleaning Clean AIR ScreenEngine OIL Filter MufflerTo Level Mower Housing To Install MowerSIDE-TO-SIDE Adjustment To Remove MowerMower Drive Belt Installation To Replace Mower Drive BeltMower Drive Belt Removal To Adjust Attachment Clutch To Replace Mower Blade Drive BeltTo Replace Mower Drive Belt To Adjust Brake Belt InstallationBelt Removal To Adjust Steering Wheel Alignment To Adjust Motion Control LeverFront Wheel TOE-INADJUSTMENT Transmission REMOVAL/REPLACE- MentTo Start Engine with a Weak Battery Replacing BatteryTo Remove Wheel for Repairs To Adjust Attachment Lift Spring To Replace Headlight BulbTo Remove Hood and Grill AS Sembly To Adjust Carburetor To Adjust Choke ControlPreliminary Setting Final SettingOther BatteryFuel System Engine OILCorrection Problem CauseChart Troubleshooting ProblemCause Correction Troubleshooting ChartFast SlowPage ELECTa£CkuzcH Schematic Tractor Model Number 917,273062Tractor -- Model Number Electrical KEY Part Description Tractor --MODEL Number ElectricalTractor Model Number 917.273062 Chassis and Enclosures Description Tractor --MODEL Number Chassis and EnclosuresTractor Model Number Ground Drive UNC Tractor --MODEL Number Ground DriveTractor Model Number Steering Steering Tractor -- Model NumberSpark Arrester KIT Tractor Model Number EngineKEY Part EngineKEY Part NO. NO. Description Tractor --MODEL Number Seat AssemblyTractor Model Number Wheels and TiresDecals Tractor -- Model Number Lift Assembly KEY Part NO. NO,DESCRIPTION Tractor Model Number Mower Deck KEY Part NO. NO.DESCRIPTION Tractor --MODEL Number Mower Deck111 KEY Part Description Tractor --MODEL Number TRANSAXLE--MODEL Number 222-3010L144569 Shaft Pump 127148X Swashplate Ylinder HEAD, Valve and Breatherj IGNITION/ELECTRICALJ Blower Housing and Bafflesj Tractor =-MODEL Number Exhaustj HEAD/VALVE/BREATHER Crankcase KEY Part Kohler ENGINE-MODEL Number CV20S, Type Number Tractor --MODEL NUM BERKEY Part NO. NO.DESCRIPTION TRACTOR-- Model NUM BERKohler ENGINE-MODEL Number CV20S, Type Number Page Page Suggested Guide for Sighting Slopes for Safe Operation Get it fixed, at your home or ours

917.273062 specifications

The Craftsman 917.273062 is a high-performance riding lawn mower designed for residential and light commercial use, blending efficiency, power, and ease of operation. This robust machine is ideal for users seeking to maintain larger lawns or properties with varying terrains.

One of the standout features of the Craftsman 917.273062 is its powerful engine. Equipped with a 19.5 horsepower Briggs & Stratton engine, this mower delivers reliable performance, offering ample power to handle thick grass and uneven surfaces. The engine's design ensures smooth operation with reduced noise levels, making mowing more pleasant.

The mower features a 42-inch cutting deck, allowing it to cover vast areas in a single pass. This deck design incorporates a twin-blade system, which enhances cutting efficiency and provides a clean, even cut. The adjustable cutting heights, ranging from 1.5 inches to 4 inches, allow users to customize their mowing experience based on their lawn's specific needs.

For improved maneuverability, the Craftsman 917.273062 features a tight turning radius, enabling users to navigate around obstacles such as trees, flower beds, and garden fixtures with ease. This is particularly advantageous for homeowners with intricate landscapes. The riding mower is also designed with a comfortable, high-back seat, which is ergonomically shaped to provide support and reduce fatigue during prolonged use.

Technologically, the mower includes a user-friendly dashboard that displays essential information, such as fuel level, speed settings, and maintenance reminders. This intuitive interface simplifies operation and helps users manage their mowing tasks effectively.

Another characteristic of the Craftsman 917.273062 is its ease of maintenance. The mower features an accessible cutting deck that makes it simple to clean and maintain the blades, ensuring optimal performance over time. Additionally, the mower is equipped with a fuel-efficient system, reducing the frequency of refueling and minimizing environmental impact.

In summary, the Craftsman 917.273062 combines power, efficiency, and user-friendly design to provide a superior mowing experience. Its combination of a robust engine, versatile cutting deck, ergonomic design, and ease of maintenance makes it a preferred choice for homeowners and landscape enthusiasts alike. Whether for routine lawn care or tackling overgrown areas, the Craftsman 917.273062 proves to be a reliable and effective solution.