Craftsman 917.27499 Brake Operation, Tires, Operator Presence System, Blade Care, Blade Removal

Page 19

TRACTOR

Alwaysobserve safety rules when

performing any maintenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be ad- justed. (See "TO ADJUST BRAKE" in the Service and Adjustments section of this

manual).

TIRES

•Maintain proper air pressure in all tires (See "PRODUCT SPECIFICATIONS" section of this manual).

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp

objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent fiat tires due to slow leaks, tire sealant may be purchased from your local parts dealer, Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are working properly, if your tractor does not function as described, repair the problem immediately.

•The engine should not start unless the brake pedal is fully depressed and attechement clutch control is in the disengaged position.

•When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never

operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be

kept sharp. Replece bent or damaged blades.

BLADE REMOVAL

1.Raise mower to highest position to allow access to blades.

2.Remove hex bolt, lock washer and flat washer securing blade.

3.Install new or resharpened blade with

trailing edge up towards deck as shown.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.Reassemble hex bolt, lock washer and fiat washer in exact order as shown.

5.Tighten bolt securely (27-35 Ft. Lbs.

torque).

IMPORTANT: Blade bolt is grade 8 heat treated.

Rat Washer,.

_l-lsxBolt(Grade)

*A Grads 8 hesttreated boltcan be identified by sixlines on the bolthead.

TO SHARPEN BLADE

NOTE: We do not recommend sharpen- ing blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and eventual damage to mower and engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone

balancer. (When using a cone bal- ancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•SLide blade on to an unthreaded portion of the steel bolt or pin and hold

the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen

the heavy end until the blade is balanced,

5/8" Bolt

de

Center Hole L_

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. How-

ever, penodic charging of the battery with an automotive charger will extend its life.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Icraftsmawi Limited 90 DAY Warranty on Battery Stabilityof the machine General OperationII. Slope Operation While on the slope Follow the manufacturersrecommendaNl. Children Tragic accidents can occur if the operator IV. ServiceMachine. Tall grass can hide obstacles Wash hands after handling Safety is InvolvedFront Product Specifications Gasoline 3.5 GallonsRC12YC Ground Speed ReverseMower SeatBefore Removing Tractor from Skid Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from Carton Unpack CartonAdjust seat before tightening adjustment knob Install SeatPacking and set aside for assembly of seat to tractor Shoder Bolt Wheel Install Mower and Drive BeltMower suspension Check Tire PressureCheck for Proper Position of ALL Belts ChecklistCheck Mower Levelness For best cutting results, mower should beAttachment Reverse Neutral Highlow Clutch Engaged NEOENG. ...OFFO,L.RESSUeLIG..SOO%..P TKnowyour Tractor Our tractors conform to the safety standardsTo Move Forward and BACK- Ward HOW to Useyourtractor To SET Parking BrakeStopping To USE Choke ControlTo Transport To Adjust Gauge WheelsTo Operate Mower To Operate on HillsADD Gasoline Towing Carts and Other AI-rACHMents Before Starting the Engine Check Engine OIL Level= Always operate engine at full throttle Mowing TipsGeneral Recommendations Lubrication ChartBefore Each USE Operator Presence System BatteryBrake Operation TiresCheck Transaxle OIL Level BeltsEngine Lubrication Cleaning Clean AIR ScreenClean AIR INTAKE/COOLING Areas To Service PRE.CLEANERTractor To Install MowerTo Level Mower Housing SIDE-TO-SIDE AdjustmentMower Drive Belt Removal Recheck side-to-side adjustmentMower Drive Belt Installation Both Front Links Must be Equal LengthTo Adjust Brake Install Mower and DriveTo Replace Mower Blade Drive Belt DePulle Keeper Belt InstallationTo Adjust Steering Wheel ALIGN- Ment Sears or other qualified service centerRear Wheel To Remove Wheel for Repairs Front WheelReplacing BAI-IERY To Remove Hood and Grill AS Sembly To Replace Headlight BulbInterlocks and Relays To Replace FuseAcceleration Test To Adjust Choke ControlTo Adjust Carburetor Final SetiingCylinders TractorEngine Fuelsystem EngineoilCause Correction ProblemCause Troubleshooting ChartCheck wiring and connec Mower drive belt worn Blades improperly installedTurn switch on Light switchTtAGTOP.oDEL HU6-P9Lt,14990 Electrical Tractor - Model NumberKEY Part NO, no Description Tractor - Model NUM BERTRACTOR--MODELNUMBER917.274990 Chassisandenclosures KEY Part NO. no TRACTOR- -MODEL Number Chassis and EnclosuresKEY Part Description TRACTOR- Model Numb ER Ground Drive KEY Part Description TRACTOR- Model NUM BER Ground DriveTRACTOR- Model Numb ER Steeringassembly TRACTOR- Model NUM BER Steeringassembly Spark Arrester KIT Tractor - Model Numb ER 917,274990 KEY Part NO. NO.DESCRIPTION TRACTOR- Model Numb ER Seat AssemblyIEY Part Description TRACTOR-- Model NumberDecals Wheels & TiresLift Assembly KEY Part TRACTOR- Model Number Lift AssemblyTransaxle 42GOR Nut 3/8-24Cylinder HEAD, Valve and Breather Crankcase HEAD/VALVE/BREATHERPage IGNITION/CHARGING KEY Part NO. NO.DESCRIPTION Blower Housing & BafflesStarting System OIL PAN/LUB Rication KEY Part Description Starting SystemCranksha Fuel System KEY Part NO. no TRACTOR- Model NumberPage Suggested Guide for Sighting Slopes for Safe Operation 179079 04.09.01 RH 1X-5,33-6937

917.27499 specifications

The Craftsman 917.27499 is a versatile and powerful riding lawn mower designed to provide optimum cutting performance and enhance the overall mowing experience. Known for its robust construction and innovative features, this mower is ideal for homeowners with medium to large yards, ensuring efficient grass management with ease.

One of the main features of the Craftsman 917.27499 is its reliable 19 horsepower Briggs & Stratton engine. This powerful engine offers ample torque and speed, enabling the mower to tackle thick grasses and uneven terrains with relative ease. The mower's automatic transmission allows for smooth acceleration and deceleration without the need for manual gear shifting, providing a user-friendly operation.

The cutting deck of the Craftsman 917.27499 is another standout feature. With a 42-inch cutting width, it allows for quick and efficient mowing, reducing the number of passes needed to cover large areas. The deck is made from durable steel to withstand the rigors of regular use, and it offers three adjustable cutting heights, enabling users to customize the mowing experience according to the grass type and height.

Ergonomics also play a significant role in the design of this mower. The comfortable, adjustable seat ensures that users can have an optimal riding position, reducing fatigue during lengthy mowing sessions. Additionally, the steering wheel is designed for ease of handling, providing accurate control and maneuverability in tight spaces around obstacles like trees and flower beds.

Another remarkable aspect of the Craftsman 917.27499 is its enhanced technology features. It includes an easy-to-use control panel that allows users to manage the mower’s functions seamlessly. Furthermore, the mower's maintenance features, such as the quick-change blade system, facilitate easy blade replacement, promoting consistent cutting performance.

Safety is paramount with the Craftsman brand, and the 917.27499 includes several safety features. The mower is equipped with a safety switch that automatically shuts off the engine if the operator leaves the seat, preventing any accidents during operation.

In summary, the Craftsman 917.27499 is a powerful, reliable, and user-friendly riding lawn mower that combines advanced technologies with robust performance. Its key features, ergonomic design, and safety mechanisms make it an excellent option for homeowners seeking efficiency and ease of use in lawn care. Whether navigating tight corners or managing larger expanses of grass, the Craftsman 917.27499 excels in delivering a well-manicured lawn with minimal effort.
Top Page Image Contents