Belts, Check Transaxle OIL Level | Craftsman 917.27499 manual

Craftsman 917.27499 manual Belts, Check Transaxle OIL Level, Engine Lubrication

•Keep battery and terminals clean.

•Keep battery bolts tight.

•Keep small vent holes open.

•Recharge at 6-10amperes for 1 hour. NOTE: Tne original equipment battery on your tractor is maintenance free. Do not

attempt to open or remove caps or covers. Adding or checking level of electrolyte is

not necessary.

TO CLEAN BA'N-ERYANDTERMINALS Corrosion and dirt on the battery and terminals can cause the battery to "leak" power.

1.Remove terminal guard.

2.Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor.

3.Rinse the battery with plain water and dry.

4.Clean terminals and battery cable ends with wire brush until bright.

5.Coat terminals with grease or petro- leum jelly.

6.Reinstall battery (See "REPLACING BA'I-FERY"inthe SERVICE AND ADJUSTMENTS section of this manual).

V-BELTS

Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear.

TRANSAXLE COOLING

Keep transaxle free from build-up of dirt and chaff which can restrict cooling.

CHECK TRANSAXLE OIL LEVEL

1.Block up rear axle securely.

2.Remove left rear wheel by removing hub belts.

3.Remove filler plug from transaxle. Oil level must be even with plug threads, if necessary, fill with SAE 30 motor oil, API SF-SJ. Replace filler plug.

4.Reassemble wheel to hub.

.__	Transaxle Filler

Plug

ENGINE

LUBRICATION

Change the oil after every 50 hours of operation or at least once a year if the tractor is not used for 50 hours in one

year.

Check the crankcase oil level before starting the engine and after each eight

(8)hours of operation, "Sghten oil fill cap/ dipstick securely each time you check the oil level,

TO CHANGE ENGINE OIL

Determine temperature range expected

before oil change. All oil must meet API service classificationSF-SJ.

•Be sure tractor is on level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitablecontainer.

1.Remove oil fillcap/dipstick. Be careful not to allow dirtto enter the engine when changing oil

2.Remove cap from end of drain valve and install the drain tube onto the fitting.

3.Unlock drain valve by pushing upward slightly and tuming counterclockwise.

4.To open, pull down on the drain valve.

5.After oil has drained completely, close and lock the drain valve by pushing upward and turning clockwise until the pin is in the locked positionas shown.

6.Remove the drain tube and replace the cap ontoto the end of the drain valve.

7.Refill engine with oil throughoil fill dipstick tube. Pour slowly. Do not overfill For approximatecapacity see "PRODUCT SPECIFICATIONS" section of this manual.

8.Use gauge on oil fiflcap/dipstick for checking level. Insert dipstick into the tube and rest the oil fill cap on the tube. Do not thread the cap onto the tube when taking reading. Keep oil at "FULL" line on dipstick. Tighten cap onto the tube securely when finished.

Oil Drain Valve

	Only use high quality detergent oil rated
	with API service classification SF-SJ.	DrainTube
	Select the oil'sSAE viscosity grade	DrainTube
	Select the oil'sSAE viscosity grade
	according to your expected operating	Locked Position
	temperature.	2O
		2O

917.27499 specifications

The Craftsman 917.27499 is a versatile and powerful riding lawn mower designed to provide optimum cutting performance and enhance the overall mowing experience. Known for its robust construction and innovative features, this mower is ideal for homeowners with medium to large yards, ensuring efficient grass management with ease.

One of the main features of the Craftsman 917.27499 is its reliable 19 horsepower Briggs & Stratton engine. This powerful engine offers ample torque and speed, enabling the mower to tackle thick grasses and uneven terrains with relative ease. The mower's automatic transmission allows for smooth acceleration and deceleration without the need for manual gear shifting, providing a user-friendly operation.

The cutting deck of the Craftsman 917.27499 is another standout feature. With a 42-inch cutting width, it allows for quick and efficient mowing, reducing the number of passes needed to cover large areas. The deck is made from durable steel to withstand the rigors of regular use, and it offers three adjustable cutting heights, enabling users to customize the mowing experience according to the grass type and height.

Ergonomics also play a significant role in the design of this mower. The comfortable, adjustable seat ensures that users can have an optimal riding position, reducing fatigue during lengthy mowing sessions. Additionally, the steering wheel is designed for ease of handling, providing accurate control and maneuverability in tight spaces around obstacles like trees and flower beds.

Another remarkable aspect of the Craftsman 917.27499 is its enhanced technology features. It includes an easy-to-use control panel that allows users to manage the mower’s functions seamlessly. Furthermore, the mower's maintenance features, such as the quick-change blade system, facilitate easy blade replacement, promoting consistent cutting performance.

Safety is paramount with the Craftsman brand, and the 917.27499 includes several safety features. The mower is equipped with a safety switch that automatically shuts off the engine if the operator leaves the seat, preventing any accidents during operation.

In summary, the Craftsman 917.27499 is a powerful, reliable, and user-friendly riding lawn mower that combines advanced technologies with robust performance. Its key features, ergonomic design, and safety mechanisms make it an excellent option for homeowners seeking efficiency and ease of use in lawn care. Whether navigating tight corners or managing larger expanses of grass, the Craftsman 917.27499 excels in delivering a well-manicured lawn with minimal effort.