Recheck side-to-side adjustment | Craftsman 917.27499 specs

Craftsman 917.27499 manual Recheck side-to-side adjustment, Both Front Links Must be Equal Length

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

•Recheck measurements after adjust- ing.

FRONT-TO-BACK ADJUSTMENT IMPORTANT: Deck must be level side-to-

side. If the following front-to-back adjustment is necessary, be sure to adjust

both front links equally so mower will stay level side-to-side.

To obtain the best cutting results, the mower housing should be adjusted so the front is approximately 1/8" to 1/2" lower than the rear when the mower is in its highest position.

Check adjustment on right sLdeof tractor. Measure distance "F" directly in front of and behind the mandrel at bottom edge of mower housing as shown.

•Before making any necessary adjust- ments, check that both front links are equal in length.

•If links are not equal in length, adjust one link to same length as other link.

•To lower front of mower housing, loosen nut "G" on both front links an equal number of turns.

•When distance "F" is 1/8" to 1/2" lower

at front than rear, tighten nut "H" against trunnion on both front links.

•To raise front of mower housing, loosen nut "H" from trunnion on both front links. Tighten nut "G" on both front links an equal number of turns.

•When distance "F is 1/8" to 1/2" lower

at front than rear, tighten nut "H" against trunnion on both front links.

NOTE: Each full turn of nut "G" will change dim. "F" by approximately 3/8".

•Recheck side-to-side adjustment.

Bottom Edge of	Bottom Edge of
M_rA____toGround	Mower toiround

BOTH FRONT LINKS MUST BE EQUAL

IN LENGTH

-Nut "G"

Front Plate Trunnion

Assernbly

TO REPLACE MOWER DRIVE BELT

MOWER DRIVE BELT REMOVAL

1.Park tractor on a level surface. Engage parking brake.

2.Remove screws from L.H. mandrel cover end remove cover.

3.Roll belt over the top of L.H. mandrel pulley.

4.Remove belt from electric clutch pulley.

5.Remove belt from idler pulleys.

6.Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface.

7.Check primary idler arm and two idlers to see that they rotate freely.

8.Be sure spring is securely hooked to primary idler arm and bolt in mower housing.

MOWER DRIVE BELT INSTALLATION

9.Install belt in both idlers. Make sure

belt is in both belt keepers at the idlers as shown.

10.Install new belt onto electric clutch

pulley.

11.Roll belt into upper groove of L.H. mandrel pulley.

12.Carefully check belt routing making sure belt is in the grooves correctly and inside belt keepers.

13.Reassemble L.H. mandrel cover.

917.27499 specifications

The Craftsman 917.27499 is a versatile and powerful riding lawn mower designed to provide optimum cutting performance and enhance the overall mowing experience. Known for its robust construction and innovative features, this mower is ideal for homeowners with medium to large yards, ensuring efficient grass management with ease.

One of the main features of the Craftsman 917.27499 is its reliable 19 horsepower Briggs & Stratton engine. This powerful engine offers ample torque and speed, enabling the mower to tackle thick grasses and uneven terrains with relative ease. The mower's automatic transmission allows for smooth acceleration and deceleration without the need for manual gear shifting, providing a user-friendly operation.

The cutting deck of the Craftsman 917.27499 is another standout feature. With a 42-inch cutting width, it allows for quick and efficient mowing, reducing the number of passes needed to cover large areas. The deck is made from durable steel to withstand the rigors of regular use, and it offers three adjustable cutting heights, enabling users to customize the mowing experience according to the grass type and height.

Ergonomics also play a significant role in the design of this mower. The comfortable, adjustable seat ensures that users can have an optimal riding position, reducing fatigue during lengthy mowing sessions. Additionally, the steering wheel is designed for ease of handling, providing accurate control and maneuverability in tight spaces around obstacles like trees and flower beds.

Another remarkable aspect of the Craftsman 917.27499 is its enhanced technology features. It includes an easy-to-use control panel that allows users to manage the mower’s functions seamlessly. Furthermore, the mower's maintenance features, such as the quick-change blade system, facilitate easy blade replacement, promoting consistent cutting performance.

Safety is paramount with the Craftsman brand, and the 917.27499 includes several safety features. The mower is equipped with a safety switch that automatically shuts off the engine if the operator leaves the seat, preventing any accidents during operation.

In summary, the Craftsman 917.27499 is a powerful, reliable, and user-friendly riding lawn mower that combines advanced technologies with robust performance. Its key features, ergonomic design, and safety mechanisms make it an excellent option for homeowners seeking efficiency and ease of use in lawn care. Whether navigating tight corners or managing larger expanses of grass, the Craftsman 917.27499 excels in delivering a well-manicured lawn with minimal effort.