Craftsman 107.289920 manual Accessing the Engine Compartment, Check Tire Pressure

Rider Maintenance Items

WARNING

Move the ground speed levers to START/PARK positions, engage the parking brake, turn the mower blades OFF, turn the ignition switch OFF, and wait for all moving parts to stop before accessing the engine compartment or performing any maintenance procedures.

ACCESSING THE ENGINE

COMPARTMENT

Lift up on the back edge of the seat deck to access the engine compartment (see Figure 17).

CLEAN DEBRIS FROM RIDER AND ENGINE COMPARTMENT

Service Interval: Before each use.

CAUTION: If debris is not removed from the engine compartment and other hot surfaces, it creates a fire hazard. Before starting the unit at the beginning of the mowing session, remove any grass clippings, dirt, leaves, or other debris from the unit. Also clean out the engine compartment.

CLEAN DEBRIS FROM ENGINE COOLING AREAS AND AIR FILTER

Service Interval: Before each use.

CAUTION: If debris is not removed from the engine compartment and other hot surfaces, it creates a fire hazard. Before starting the unit at the beginning of the mowing session, lift the seat deck and clean any debris from the intake screen on top of the engine (A, Figure 18), exposed engine cooling fins, and around the air filter assembly. Also open the air filter cover (B) and remove

any debris that has accumulated in the air filter compart- ment.

Figure 17. Accessing the Engine Compartment

Figure 18. Engine Compartment

A. Intake Screen

B. Air Filter Cover

CHECK TIRE PRESSURE

Service Interval: 25 Hours.

Tire pressure should be checked periodically, and main- tained at the levels shown in Figure 19. Note that these pressures may differ slightly from the "Max Inflation" stamped on the side-wall of the tires. The pressures shown provide proper traction, improve cut quality, and extend tire life.

Tire	Pressure
Front	18-20 psi (1,24-1,38	bar)
Rear	10-12 psi (,69-,83	bar)
Figure 19. Tire	Pressures

23