McCulloch 966994701, MCS2003, 6096-200317 user manual Introduction, General Information

INTRODUCTION

PLEASE READ

Dear Customer,

Thank you for purchasing a McCulloch product. With proper operation and maintenance, it will provide you with years of serv- ice.

In order to make the best use of your investment, be CERTAIN to familiarize yourself with the contents of the ENTIRE user manual before attempting to operate and maintain your unit.

Be sure to carefully follow the step-by-step instructions in this manual to start, operate and maintain your new product.

In the manual there will be the following call-outs: NOTE:, WARNING / CAUTION and WARRANTY.

A NOTE: is used to convey additional information, to highlight a particular explanation, or to expand a step description.

1 - GENERAL INFORMATION

Hopper	ON-OFF
	Switch

Overload

Hopper SafetyProtection Switch

Screws

A WARNING or CAUTION identifies a procedure which, if not undertaken or if improperly done, can result in serious person- al injury and/or damage to the unit.

The (WARRANTY SYMBOL) serves notice that unless instructions or procedures are followed, any damage caused will void the warranty and repairs will be at owner’s expense.

Pay particular attention to the safety precautions. They are written for your protection and contain important information you must know to safely operate your shredder.

FOR WARRANTY OR SERVICE CONTACT THE NEAREST McCULLOCH AUTHORIZED SERVICE CENTER - LOCATE

YOUR NEAREST SERVICE CENTER BY CALLING THE TOLL FREE NUMBER IN THIS MANUAL.

Discharge chute

access knobs

Discharge

Chute

Wheel Spacers (2)*

Wrench

Wheel Caps (2)*

Wheel (L)			Wheel (R)		Flat Washers
		Axle		Leg (R)	(2)*
					Leg Nuts
					(4)*
	Leg (L)				Leg Saddle Washers
					(4)*

Wheel

Nuts (2)*

Leg Bolts (4)*

Safety Set

Screws (4)*

2

SPECIFICATIONS

Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120V~, 60Hz, 15 Amp No Load Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3300 RPM

Hopper Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14.4”x9.4”x7.5” Max. Cutting dia. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5/8” (40mm) Wheel Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6” (154m)

Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48.5 Lbs. (22 Kg)

3