Troy-Bilt 020242-1 owner manual Troubleshooting, Problem Cause Correction

Page 18

Section

7

Troubleshooting

TROUBLESHOOTING

	Problem	Cause		Correction

		1.	Low pressure nozzle installed.	1.	Replace nozzle with high pressure
					nozzle.
		2.	Water inlet is blocked.	2.	Clear inlet.
		3.	Inadequate water supply.	3.	Provide adequate water flow.
	Pump has following problems:	4.	Inlet hose is kinked or leaking.	4.	Straighten inlet hose, patch leak.
	Pump has following problems:	5.	Clogged inlet hose strainer.	5.	Check and clean inlet hose
	failure to produce pressure, erratic	5.	Clogged inlet hose strainer.	5.	Check and clean inlet hose
	failure to produce pressure, erratic				strainer.
	pressure, chattering, loss of				strainer.
	pressure, chattering, loss of	6.	Water supply is over 100°F.	6.	Provide cooler water supply.
	pressure, low water volume.	6.	Water supply is over 100°F.	6.	Provide cooler water supply.
	pressure, low water volume.	7.	High pressure hose is blocked or	7.	Clear blocks in outlet hose.
		7.	High pressure hose is blocked or	7.	Clear blocks in outlet hose.
			leaks.
		8.	Gun leaks.	8.	Replace gun.
		9.	Nozzle is obstructed.	9.	Clean nozzle.
		10.	Pump is faulty.	10.	Contact authorized service facility.

		1.	Detergent siphoning tube is not	1.	Insert detergent siphoning tube
			submerged.		into detergent.
		2.	Chemical filter is clogged or	2.	Clean or replace filter/detergent
	Detergent fails to mix with spray.		cracked.		siphoning tube.
		3.	Dirty in-line filter.	3.	See "Check In-Line Filter".
		4.	High pressure nozzle installed.	4.	Replace nozzle with low pressure
					nozzle.

		Engine speed is too slow.		Move throttle control to FAST
	Engine runs good at no-load but			position. If engine still "bogs down",
	"bogs" when load is added.			contact Briggs and Stratton service
				facility.

	Pressure washer stops during	Out of fuel.		Fill fuel tank.
	operation.

18

Image 18

Contents Pressure Washer / Lavadora de Presión Model / Modelo Manual No GS Revision 0 04/06/2005Table of Contents Safety RulesEquipment Description When Adding Fuel Operate pressure washer only outdoorsHigh pressure spray may damage fragile items including glass Features and Controls Section Know Your Pressure WasherAttach Handle and Accessory Tray AssemblyCarton Contents Preparing Pressure Washer for USEAssembly Add Engine Oil and FuelInspect inlet Checklist Before Starting EngineConnect Hose and Water Supply to Pump Screen, doPressure Washer Location HOW to USE Your Pressure WasherOperation Section To Start Pressure WasherHow to Stop Your Pressure Washer How to Use Accessory TrayOperation How to Use ProjectPro Nozzle System Low PressureFollow these instructions to change ProjectPro nozzles Max Nozzle Pressure Washer Rinsing Cleaning and Applying ChemicalCleaning Detergent Siphoning Tube Automatic Cool Down SystemGeneral Maintenance Recommendations Section MaintenanceSpecifications Pressure Washer MaintenanceRing Maintenance MaintenanceNozzle Maintenance Pump MaintenanceEngine Maintenance Data TagStoring the Engine StoragePreparing the Unit for Storage Protecting the PumpTroubleshooting TroubleshootingProblem Cause Correction Equipment Consumer Use Commercial Use TROY-BILT Owner Warranty Policy Effective November 1About your equipment warranty Portable Generator Years 2nd year parts onlyDescripción DEL Equipo Reglas de SeguridadConserve Estas Instrucciones Tabla DE Contenidos Reglas DE SeguridadSección 1 Reglas de Seguridad Cuando Añada CombustiblePrecaución Características y Controles Conozca SU Maquina Lavadora DE PresionMontaje MontajePreparando EL Lavador a Presión Para SU USO Sección 3 Montaje Agregar Aceite al Motor y GasolinaColoque la lavadora a presión sobre una superficie nivelada Deposite la gasolina adecuada en el tanque del combustible Conecte la Manguera y el Suministro de Agua a la BombaLista de Revision Previa al Arranque del Motor Proporcione el suministro de agua adecuadoUbicación del Lavadora a Presión OperaciónCómo Usar SU Máquina Lavadora a Presión Cómo Darle Arranque a su Máquina Lavadora a PresiónSección 4 Operación Cómo Parar su Lavador a PresiónCómo Usar la Bandeja de Accesorios La Presión Alta Cómo Usar el Sistema de Boquillas ProjectProLa Presión Baja Coloque el pestillo de seguridad de la pistola de rociadoFigura 36 Boquilla Maxima Limpiando el Tubo Limpieza y Aplicación del QuímicoEnjuage de la Máquina Lavadora a Presión Sistema de Enfriamiento Automático Alivio TérmicoRecomendaciones Generales MantenimientoEspecificaciones Mantenimiento DE LA Maquina Lavadora a PresionMantenimiento de la Boquilla Sección 5 MantenimientoMantenimiento DEL Motor Mantenimiento de los Anillos OAlmacenando EL Motor Sección 5 y 6 Mantenimiento y AlmacenamientoPreparando LA Unidad Para SU Almacenamiento Etiqueta de DatosDiagnosticos de Averías Reparacion DE DañosGenerador Portátil Efectiva desde el 1 ro de NoviembreEquipo Para Uso Del Consumidor Para Uso Comercial Año