Tiger RBF-19C manual Filter Replacement, Power TAKE-OFF Shaft, Hoses and Rotor Drive Circuit, Pump

Page 85

MAINTENANCE

FILTER REPLACEMENT

The Filter Element, Situated in the filter unit in the top of the tank, must be replaced initially after 50 Hours work, and thereafter every 500 hours of work, or after two season's work, which ever is sooner.

POWER TAKE-OFF SHAFT

The PTO requires some routine maintenance to ensure a trouble free life of the PTO shaft. For best results:

A.Grease both ends of PTO shaft daily.

B.Grease the PTO shaft tubes regularly.

C.Ensure check chains are securely attached and in good condition.

D.Check that PTO guard is in good condition and replace if not.

E.Check universal joint bearing journals for roughness or slackness. Replace if necessary.

HOSES AND ROTOR DRIVE CIRCUIT

It is false economy to try and make a damage hose last a bit longer, because a failure can spill several gallons of oil on the road endangering traffic and costing money. To reduce the risk of this happening and ensure a long life from the hoses follow instructions given below:

A.Check weekly that all hoses and their connections (with particular attention to the rotor drive circuit) are in good condition and that there are no leaks or damage.

B.Replace any hose that is leaking or damaged.

C.Ensure that hoses have not chafed against sharp edges. If they have, inspect damage and replace if necessary.

D.Re-route any hose that has been chafing.

E.Ensure that when fitting hoses that they are fitted without kinks or sharp bends.

F.Pay particular attention to the suction hose from tank to pump.

G.If in doubt about the condition of a hose REPLACE IT.

HYDRAULIC OILS

Only use Universal Hydraulic Oil part number 02960575.

PUMP

A 'noisy' pump (whistling or screaming) means that there is air in the rotor drive circuit.

A.STOP THE MACHINE AT ONCE.

B.Locate air entry.

C.Fix and test carefully.

RBF-19C 07/04

Maintenance Section 5-3

© 2004 Alamo Group Inc.

 

Page 84 Page 86
Image 85
Page 84 Page 86
Contents RBF-19C To the OWNER/OPERATOR/DEALER Table of Contents Page Safety Section Safety ¡LEA EL Instructivo PeligroAgent. SG-22 Wait a minute...Save a life Not match the Tractor PTO Stop Mowing if Passersby are Within 100 Yards UN- Less Equipment Operation Safety Instructions and PracticesSBM-10 Stop Mowing if Passersby are Within 100 Yards Unless Dismounting.SG-39 SGM-7 SGM-11 Maintenance and Service Safety Instructions and Practices Or death. SBM-12 See Your Tiger Dealer Parts InformationTransporting Safety Instructions and Practices Regulations. SG-6 Storage and Parking Safety Instructions and Practices 14 11 10 25 20 QTY Level Description Safety Safety Safety Safety Safety Safety Safety Safety Duties This Act SeeksOsha Regulations Employer ResponsibilitiesIntroduction Section Before Operating this Machine IntroductionAssembly Section Tractor Requirements GeneralMachine Preparation Fitting Machine to Tractor Assembly Section Fitting PTOLever Unit Fitting ControlsHydraulic Systems Adjust Lever Pivot PositionFill Tank with OIL RBF-19C Assembly Section Fitting Rotor Unit Mechanical Breakout Connecting the MotorHose Layout TwistsChafing Hoses Sharp BendsAccumulator KIT Flexible Front Guard KITRBF 19C Assembly Section Bleeding Rams Initial RUNBleeding the First Ram Assembly Page Operation Section Operation Tiger Rear Mount Boom Operation Instructions Connectingattaching HeadsOperation Tractor Requirements Operator RequirementsTractor Requirements and Capabilities Rops and Seat Belt Shatter Proof Safety WindowsOperator Thrown Object Protection Tractor Lighting and SMV EmblemTractor Ballast Getting on and OFF the TractorDismounting the Tractor Boarding the TractorStarting the Tractor Dash Nominal Torque Value Size IN.LBS FT.LBS Connecting Attaching Head to the BoomTractor Pre-Operation Inspection/Service PRE-OPERATION Inspection and ServiceFrame Assembly Boom Unit Pre-Operation Inspection and ServiceBoom ARM Assembly Hydraulic PUMP/OIL Reservoir Hydraulic Line InspectionFlail Head Inspection Operating the Control Valves Valve Operation Plate P/N Driving the Tractor and Mower Starting the Tractor Brake and Differential Lock SettingDriving the Tractor and Mower Operating the Boom Unit and Attached Head Foreign Debris Hazards / Overhead Obstructions Operating the Attached Mower Heads Operating Speed and Ground SpeedRoller Height Grass FlailGround Level and Scrub Cutting lower roller to its maximum Operation Grass Cutting Alternative Rotor Link PositionsStalling the Rotor Hedge TrimmingMotor Position Shutting Down the Attached Head TRACTOR, BOOM, and Attached Head StorageTransporting the Tractor and Mower Transporting on Public Roadways Hauling the Tractor and Mower Trouble Shooting Guide Page Maintenance Section Gearbox LubricationGrease Points PTO Drive TubesPower TAKE-OFF Shaft Filter ReplacementHoses and Rotor Drive Circuit Hydraulic OilsHydraulic Cylinders Rotor UnitStorage Parking and RemovalClose Isolator Valves on First ARM and Accumulator if Fitted Proper Torque for Fasteners Figure Warranty Information ONE Last Word RBF-19C-OMWPL-07/04 Printed U.S.A

RBF-19C specifications

The Tiger RBF-19C is a remarkable example of advanced unmanned aerial technology, designed primarily for reconnaissance and battlefield surveillance. This drone has garnered attention for its exceptional capabilities and cutting-edge features that make it a valuable asset for military and defense operations.

One of the standout characteristics of the RBF-19C is its high-altitude endurance. The drone is engineered to operate at significant elevations, which allows it to cover vast terrains while remaining undetected. With a maximum altitude capability of 20,000 feet, it can conduct prolonged missions, gathering intelligence over hostile areas without risking human pilots.

Under the hood, the Tiger RBF-19C incorporates advanced sensor technologies that enable it to deliver real-time data. Equipped with high-definition cameras, multispectral sensors, and infrared technology, it can capture detailed images and videos even in adverse weather conditions and low-light environments. This capability significantly enhances situational awareness for ground forces, making decision-making faster and more efficient.

Another notable feature of the RBF-19C is its extended operational range. The drone can maintain a communication link over distances exceeding 200 kilometers, enabling it to operate far beyond the frontline. This extended range allows for strategic reconnaissance missions, providing vital intelligence without exposing personnel to danger.

In terms of maneuverability, the Tiger RBF-19C is designed for versatility. It features a robust flight control system that allows for nimble navigation in complex environments. The drone can perform various flight patterns, including loitering and waypoint navigation, which is particularly useful for surveillance missions where constant observation of a target is crucial.

Moreover, the RBF-19C is built with a modular design, allowing for quick modifications and upgrades to suit different mission requirements. This adaptability ensures that it can be easily retrofitted with new technology or payloads, keeping it relevant amidst rapidly evolving warfare tactics.

Lastly, the RBF-19C is renowned for its stealth capabilities. Designed with a low radar cross-section and noise-reduction technologies, it minimizes its visibility to enemy radar systems, enabling covert operations. This attribute is essential for missions that require undetected data gathering.

In conclusion, the Tiger RBF-19C represents a significant advancement in drone technology, combining endurance, advanced sensors, extended range, and stealth. Its sophisticated design and operational capabilities make it an invaluable tool for modern military forces, enhancing their ability to carry out reconnaissance and maintain situational awareness on the battlefield.
Top Page Image Contents