GENERAL INFORMATION
The purpose of this manual is to assist you in oper- ating and maintaining your chipper. Read it care- fully. It furnishes information and instructions that will help you achieve years of dependable perfor- mance. These instructions have been compiled from extensive field experience and engineering data. Some information may be general in nature due to unknown and varying operating conditions. However, through experience and these instruc- tions, you should be able to develop procedures suitable to your particular situation.
The illustrations and data used in this manual were cur- rent at the time of printing, but due to possible inline production changes, your chipper may vary slightly in detail. We reserve the right to redesign and change the chipper as may be necessary without notification.
Throughout this manual, references are made to right and left directions. These are determined by standing behind the equipment facing the direction of forward travel.
SPECIFICATIONS
| TCH4500 |
Overall Size | |
Maximum Chipper Capacity | |
Chipper Blade | 2 - Reversible |
| 3/8" x |
Rotor Size | 14" dia. x 1 |
Rotor Weight (with blades) | 49 lbs |
Rotor Weight (without blades) | 45 lbs |
Discharge Size | 4.5" x 9" (Standard) |
| 4.5" x 4.5" (Optional) |
Drive Type | Belt |
Belt Size | 2RB47 ARMID Construction |
Weight | 390 lbs |
4 Introduction | MAN0458 (9/23/2005) |
|
|