Woods Equipment MDO80-2 manual MD80 Assembly Figure, Driveline Installation

Page 32

1.Hitch pin

2.Mast plate

3.A-frame half

4.7/8 x 1-1/8 x 19/32" Sleeve

5.Support brace

6.3/4" Flat washer

7.13/16 x 1-9/16 x 10 GA Washer

8.3/4" Slotted hex nut

9.5/8 x 1-1/2" Bolt

10.5/8" Hex lock nut

11.3/4 x 4-1/2" Bolt

12.Lift channel

13.Spacer bushing

14.3/4" Hex lock nut

15.Top link pin

16.5/8 x 3-3/4" Clevis pin

17.Hitch stop

18.5/8 x 4-1/2" Bolt

19.Tailwheel arm bracket

20.Tailwheel

21.5/8" Elastic stop nut

22.5/8 x 2" Bolt

23.5/8 x 1-3/4" Bolt

24.5/8" Flat washer

25.3/4 x 8" Clevis pin

26.Tailwheel mounting bracket

27.Rebound pad support

28.Rebound pad

29.3/8 x 1" Bolt

30.3/8" Flange hex nut

31.3/16 x 1-1/2" Cotter pin

32.3/8 x 3/8 x 2" Key

33.3/4 x 6-7/8" Clevis pin

34.Tailwheen bracket

35.Rear drive half

36.Clamp bolt

37.1/2" Lock washer

38.1/2" Hex nut

39.1/4 x 3" Cotter pin

40.Tether chain

Figure 26. Assembly of MD80 (Mounted Model)

MD80 Assembly (Figure 26)

Driveline Installation

Loosen clamp bolt (36) on rear half of drive. Install key

(32)in gearbox keyway and slide drive onto gearbox input shaft. Install cotter key (39) and tighten clamp

bolt. Snap tether chain (40) to gear stand to prevent driveline shield rotation.

Tailwheel Installation

Attach tailwheel bracket (34) to cutter frame with bolts

(23)and lock nuts (10). Attach tailwheel arm brackets

(19)to brackets on rear of cutter frame with bolts (22)

32 Assembly

15916 (Rev. 3/30/2007)

 

 

Image 32
Contents Rotary Cutter Introduction To the DealerTable of Contents LEA EL InstructivoGeneral Information SpecificationsTractor Requirements Free Mower Safety Video SafetyTraining Package for Rotary Mowers/Cutters-English Training Package for Rotary Mowers/Cutters-English/SpanishTraining Safety RulesPreparation Transportation MaintenanceOperation Storage Safety & Instructional Decals Serial Number PlateTo Avoid Serious Injury or Death RED Rear ReflectorRotating Blades Thrown Objects Be CarefulOperation OperationTractor Stability Attaching Cutter to Tractor 3-POINT ModelsDriveline Attachment Shorten DrivelineCutting Height Adjustment With Tailwheel or Check Chains Cutting Height Adjustment for MD80 Mounted Cutter FigureCutting Height Adjustment Without Tailwheel or Check Chains Cutting Height Adjustment for D80 Pull-Type Cutter Figure Attaching Cutter to Tractor PULL-TYPE ModelsPRE-OPERATION Check List Starting and Stopping CutterCleaning Operating TechniqueLubrication Information Figure Owner ServiceOwners Service Blade Servicing Figure Blade Removal FigureBlade Installation Belt Installation FigureBlade Sharpening Chain ShieldingServicing Tires Safely Split Rim Tire ServicingGearbox Maintenance Dealer ServiceDealer Service Gearbox Assembly Gearbox AdjustmentAssembly Blade Spindle Repair FigureUniversal Joint Repair Shield Bearing ServiceJoint Disassembly Joint Assembly Servicing Tires Safely Trouble Shooting Problem Possible Cause SolutionAssembly AssemblyBlade Installation Figure Distribution Baffle Installation FigureGearbox Lubrication Chain Shielding Installation FigureWheel Yoke Installation for DO80-2 Pull- Type Cutter Figure Tongue and H-Frame Assembly Tongue Installation for DO80-2 Pull-Type Cutter Figure Optional Hydraulic Lift AssemblyMD80 Assembly Figure Driveline InstallationOptional Leaf Mulcher Installation Figure Frame and Lift InstallationOptional Check Chain Installation Figure Optional Check Chain InstallationDealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListDealer Check Lists Index to Parts List PartsDO80-2 Main Frame Assembly PULL-TYPE Part QTY DescriptionMDO80-2 Main Frame Assembly Mounted Model DO80-2 & MDO80-2 Main Frame Assembly Common Parts 2390 DO80-2 Front 2/3 of 3-JOINT Drive Square Shaft DO80-2 Front 2/3 of 3-JOINT Drive TWO-LOBE Shaft MDO80-2 Front 1/2 of Universal Drive DO80-2 & MDO80-2 Rear Section of Univeral DriveDO80-2 & MDO80-2 Gearbox Assembly Gearbox Repair KitDO80-2 & MDO80-2 Blade Spindle Assembly DO80-2 & MDO80-2 BladesDO80-2 & MDO80-2 Chain Shielding Assembly DO80-2 & MDO80-2 Idler Pulley Assembly DO80-2 Parking JackDO80-2 Height Adjustment Crank DO80-2 SPRING-LOADED Wheel YokeDO80-2 RIM & Axle Assembly DO80-2 Laminated Tire with HUB & AxleDO80-2 Aircraft Tire & HUB SOL ID T IREMDO80-2 Tailwheel Assembly DO80-2 Pivot Link KIT Optional DO80-2 Hydraulic Hose KIT & Fittings OptionalDO80-2 3-1/2 X 8 Hydraulic Cylinder #10475 Optional DO80-2 & MDO80-2 Leaf Mulcher Assembly Optional MDO80-2 Check Chain Assembly OptionalMDO80-2 Category 2 Hitch PIN Options MDO80-2 Category 2 Bushing KITParts Bolt Torque Chart SAE Series Torque ChartAppendix Metric SeriesBolt Size Chart AbbreviationsIndex IndexWarranty Warranty

DO80-2, MDO80-2 specifications

The Woods Equipment MDO80-2 and DO80-2 are robust and innovative pieces of machinery designed to meet the demands of both commercial and agricultural applications. Renowned for their efficiency and performance, these models have garnered attention for their advanced features and technologies that enhance productivity.

One of the standout characteristics of the MDO80-2 and DO80-2 is their powerful cutting capabilities. Equipped with a heavy-duty steel frame, both models provide exceptional durability, allowing them to withstand rigorous use in various conditions. The cutting decks are designed for superior grass trimming, reducing the need for multiple passes and saving valuable time. The adjustable cutting height offers versatility, accommodating different grass types and lengths, ensuring a flawless finish every time.

Another key feature of these models is their advanced blade technology. The blades are crafted from high-quality steel, increasing their longevity and performance. The designs enable clean cuts, promoting healthier grass growth and enhancing the overall appearance of lawns and fields. Additionally, the MDO80-2 is equipped with a double-blade system, which further enhances cutting efficiency and reduces clumping.

The MDO80-2 and DO80-2 also prioritize user comfort and ease of operation. They come with ergonomic controls that ease the strain on operators during extended use. The intuitive design of the control panel simplifies operation, allowing users to focus on their tasks without getting bogged down by complicated settings.

For enhanced maneuverability, both models feature a smooth turning radius, making them ideal for navigating tight spaces. Whether working in a residential yard or a larger agricultural field, operators benefit from the agility these machines provide.

In terms of maintenance, Woods Equipment has developed the MDO80-2 and DO80-2 with user-friendliness in mind. The models are designed for easy access to critical components, simplifying routine maintenance tasks. This design philosophy not only prolongs the lifespan of the equipment but also minimizes downtime.

Overall, the Woods Equipment MDO80-2 and DO80-2 are exceptional choices for those seeking high-performance mowing solutions. With their durable construction, advanced cutting technologies, and user-friendly features, these models are well-suited for fulfilling the demands of any mowing operation, making them a reliable investment for years to come.