Woods Equipment BW180HDQ Install Wing Wheel and Hub All Models, Left Wing Lock-Up Bar Installed

Page 38

NOTE: Items 23 & 24 must be installed with square corners on top and facing cylinder as shown.

2.Slide spacer (17) and lock-up bar (19) over clevis pin (22) on back side of cylinder lug & secure with washer (27) and cotter pins (66).

3.Attach base end of wing cylinder (4) to cylinder links (23 & 24) using clevis pin (18) and cotter pins (66).

4.Remove plug from base end of hydraulic cylinder. Align cylinder rod end with cylinder lug on the wing and insert lock-up pin (26).

5.Slide spacer (25) over lock-up pin (26) on back side of cylinder rod and secure with cotter pins (66).

6.Insert safety pin (45) into the end of lock-up pin (26). The safety pin will secure lock-up bar into position when wing is in the UP position.

7.Extend cylinder fully & replace plug in base end of cylinder. This trapped air will help push wing down.

8.Install bushing (40), elbow, (41) and hose (42) to the rod end of cylinder (4). See Install Hose Kit (BW180HD), page 39 for complete instructions.

9.Repeat procedure for opposite wing.

23

24

19

 

 

 

22

 

 

 

66

 

17

 

 

 

 

 

DP3

 

 

 

 

17.

Spacer, 1"

23.

Cylinder link

19.

Wing lock-up bar

24.

Cylinder link

22.

Headless pin,

66.

Cotter pin,

 

1 x 4.08

 

1/4 x 1-1/2

Figure 32. Left Wing Lock-Up Bar Installed

Install Wing Wheel and Hub (All Models)

1.Insert wheel hub into wing wheel yoke arms (6) and align holes.

2.Secure into position using cap screw (54) and flanged lock nut (55).

3.Attach wheel to hub using five lug nuts. Install the chamfered side of the lug nut toward the inside for steel rim for pneumatic tires and rims. Tighten to 75 lbs-ft. Check that tire air pressure is a maximum of 40 psi.

NOTE: Install the flat side of the nut toward the inside for solid tires and aircraft tires (shown).

4.Install optional dual wheel and hub to inside of wheel yoke arm.

NOTE: Pneumatic (BW180HD models and BW180HB models), notat, and airplane tires are available for this cutter. See page 63 for parts list.

6.Wing wheel yoke arm, right

21. Wheel and hub

39.1/2 NC x 3 HHCS GR5

40.1/2 NC Flanged lock nut

Figure 33. Wing Wheel and Hub Installation - Right

38 Assembly

MAN0805 (4/30/2009)

 

 

Image 38
Contents Batwing Introduction To the DealerTable of Contents LEA EL InstructivoSpecifications General InformationFree Mower Safety Video SafetyTraining Package for Rotary Mowers/Cutters-English Training Package for Rotary Mowers/Cutters-English/SpanishTraining Safety RulesInstallation PreparationTransportation OperationMaintenance Storage Safety & Instructional Decals Be Careful1000 RPM Safety Operation Connecting Cutter to TractorOperation Hydraulic ConnectionCV Driveline Turning Limits Cutting Height AdjustmentInterference Check Tractor OperationShredding Cutter OperationMowing Tips Transporting Lock-UpPRE-OPERATION Check List Owners ResponsibilityBlocking Method Owner ServiceOwner Service Driveline Lubrication LubricationGearbox Lubrication Blades Blade Installation FigureSeasonal Lubrication Blade Removal FigureSlip Clutch Adjustment Figure Blade SharpeningServicing Tires Safely CleaningShielding Repair Troubleshooting TroubleshootingGearbox Maintenance Dealer ServiceDealer Service Seal Replacement FigureRemoval from Cutter Figure Disassembly FigureGearbox Repair Reinstallation GearboxSplitter Gearbox Repair Figure Removal from Cutter DisassemblyAssembly Reinstallation on Cutter Check GearboxCrossbar Removal Crossbar RemovalUniversal Joint Repair Crossbar InstallationJoint Disassembly Joint Assembly Dealer SET-UP Instructions AssemblyAssembly Instructions Install Height Adjustment Cylinder BW180HD Install SMV Emblem BW180HDInstall Wheel and Hub BW180HD Install Tongue BW180HDInstall 3-Joint Drive 540 RPM Only BW180HD Joint Drive InstallationInstall Wing Cylinder & Lock-up Bar BW180HD Install CV Drive BW180HD- OptionalInstall Wing BW180HD Install Wing Wheel and Hub All Models Left Wing Lock-Up Bar InstalledInstall Hose Kit BW180HD Install Wing Wheel Yoke Adjustment Link BW180HDInstall Wing Driveline BW180HD Winch Kit Installation OptionalInstall Chain or Belt Shielding BW180HD Chain Shielding Installation Center SectionChain Shielding Installation Right Wing Shown Belt Shielding Installation Right Wing PRE-DELIVERY Check List Dealer Check ListsDealer Check Lists Delivery Check ListMAN0805 4/30/2009 Parts BW180HD, BW180HDQ BW180HB, BW180HBQ BW126HB, BW126HBQMain Frame Assembly Front Section Part QTY Description BW180HD Main Frame Assembly Rear Section Tire & hub see BW180HB Main Frame Assembly Rear Section REF Part QTY Description Wing Assembly See Wing & Center Gearbox Assembly Center Splitter Gearbox Assembly Gear, 540 rpmCenter Deck Drive Assembly Front Drive Assembly Equal Angle Rear Drive Assembly Equal Angle Type a 540 RPM & 1000 RPM Front CV Drive Type B 540 RPM & 1000 RPM Front CV Drive Wing Drive Assembly Bolt Wheel & Tire Assembly 1027468 Rubber Shielding Wing Front & Rear Standard on BW180 Models Chain Shielding Center Section Front & Rear Single ROW Double ROWChain Shielding Wing Front & Rear Single ROWHydraulic Cylinders Crossbar Puller Optional Hydraulic Cylinder Stroke Control KITBW126HB / BW126HBQ Weight BOX Assembly Optional Winch Kit Operation Winch Kit InstallationWinch KIT Optional Appendix Bolt Torque ChartSAE Series Torque Chart Metric SeriesBolt Size Chart AbbreviationsIndex IndexWarranty Rev /23/2005

BW180HDQ, BW180HD, BW180HB specifications

Woods Equipment has long been a leader in the agricultural and landscaping industry, providing exceptional products that enhance productivity and efficiency. Among its standout offerings are the BW180HB, BW180HD, and BW180HDQ models. These versatile implements are primarily designed for use with tractors, making them invaluable for a variety of tasks.

The BW180HB model is known for its high-performance capabilities combined with a compact design. One of its main features is its heavy-duty construction, which ensures durability and longevity even under strenuous conditions. The implement is equipped with a balanced weight distribution system that allows for better stability and control during operation. Additionally, the BW180HB is designed to handle a range of tasks from grading and leveling to scraping and light dozing.

Moving up the series, the BW180HD offers a higher capacity and is built for more demanding applications. This model features a robust hydraulic system that enhances lifting capabilities, allowing operators to tackle heavier loads with ease. Its advanced blade adjustment features allow for precise angle and depth control, making it ideal for a variety of terrains. The BW180HD is particularly praised for its reliability in tough environments, thanks to its reinforced frame and high-quality materials.

The BW180HDQ model represents the pinnacle of Woods Equipment's offerings in this series. It features all the capabilities of the BW180HD but includes advanced technological enhancements for improved performance. The inclusion of an automated hydraulic control system streamlines operations, enabling operators to adjust settings on-the-fly to adapt to changing conditions. Additionally, the BW180HDQ comes with integrated safety features that protect both the operator and the equipment during use.

All three models share several common characteristics that make them preferred choices among landscaping and construction professionals. They are compatible with a wide range of tractor types, ensuring versatility for various users. The quick-connect attachment points allow for rapid changes between implements, saving time and increasing productivity. With easy maintenance designs, these models ensure that downtime is minimized, allowing operators to focus on the task at hand.

In summary, the Woods Equipment BW180HB, BW180HD, and BW180HDQ models are exceptional tools for anyone looking to enhance their operational efficiency in agriculture or landscaping. With their robust features, advanced technologies, and commitment to durability, these implements represent some of the best options available in the market today.