Woods Equipment BW180HB, BW180HDQ Install CV Drive BW180HD- Optional, Install Wing BW180HD

Page 37

Install CV Drive (BW180HD)- Optional

Before installing cutter input driveline to gearbox, check the tag wired to the driveline and the tag wired to the input shaft of gearbox. Ensure the tag rpm speeds match the rpm speed decal on front of cutter. After con- firming all speeds match, remove and discard tags and then complete driveline assembly.

1.Align hole in drive yoke with groove on gearbox input shaft and slide rear half of drive (23) onto shaft.

2.Secure with bolt and nut supplied with drive.

23.CV Drive

Figure 29. CV Drive Installation

Install Wing (BW180HD)

CAUTION

Use a suitable lifting device of sufficient capac- ity. Use adequate personnel to handle heavy com- ponents.

7.Side skid 15.Hinge pin

35. 1" Flat washer

37. Spring pin, 1/4 x 1-1/2

55. 1/2 NC Lock nut

56. 1/2 NC x 1-1/2 carriage bolt

Figure 30. Right Wing Installation

Install Wing Cylinder & Lock-up Bar (BW180HD)

The wing must be installed in the following sequence and will require at least two people. A floor jack or a suitable lifting device will be helpful to align decks when installing the hinge pin.

Check RPM tags on wing and center section to make sure they match before proceeding.

1.

Remove hinge pin (15) from center section.

2.

Place wing assembly adjacent to the center section

 

and align hinge sections.

3.

Insert hinge pin through the hinge sections and

 

secure with spring pin (67) and washer (35) on

4.Hydraulic cylinder

17. Spacer, 1"

18. 1 x 2.72 Clevis pin

19. Wing lock-up bar

22. 1" x 4.08" Clevis pin

23. Cylinder link

24. Cylinder link

25. Spacer, 3/4

26. Lock-up pin 1" x 5"

27. Washer, 1 x 1-7/8

40.1/2 NPT x 1/4 NPT Reducer bushing

41.1/4 NPT x 1/4 NPT Restricted

42.1/4 NPT x 1/4 NPT x 200" Hose

45. 3/16 Safety pin

66. 1/4 x 1-1/2 Cotter pin

 

both ends.

4.

Attach side skid (7) to the wing using four carriage

 

bolts (56) and flange lock nuts (55).

5.

Repeat procedure of opposite wing.

Figure 31. Wing Cylinder & Lock-Up Bar Installation

1.Place two cylinder links (23 & 24) on either side of cylinder lug on center section as shown, align holes and insert clevis pin (22).

MAN0805 (4/30/2009)

Assembly 37

 

 

Image 37
Contents Batwing To the Dealer IntroductionLEA EL Instructivo Table of ContentsGeneral Information SpecificationsSafety Free Mower Safety VideoTraining Package for Rotary Mowers/Cutters-English/Spanish Training Package for Rotary Mowers/Cutters-EnglishInstallation Safety RulesTraining PreparationOperation TransportationMaintenance Storage Be Careful Safety & Instructional Decals1000 RPM Safety Operation Connecting Cutter to TractorOperation Hydraulic ConnectionInterference Check Cutting Height AdjustmentCV Driveline Turning Limits Tractor OperationMowing Tips Cutter OperationShredding Lock-Up TransportingOwners Responsibility PRE-OPERATION Check ListOwner Service Owner ServiceBlocking Method Gearbox Lubrication LubricationDriveline Lubrication Seasonal Lubrication Blade Installation FigureBlades Blade Removal FigureBlade Sharpening Slip Clutch Adjustment FigureShielding Repair CleaningServicing Tires Safely Troubleshooting TroubleshootingDealer Service Dealer ServiceGearbox Maintenance Seal Replacement FigureGearbox Repair Disassembly FigureRemoval from Cutter Figure Gearbox ReinstallationAssembly DisassemblySplitter Gearbox Repair Figure Removal from Cutter Check Gearbox Reinstallation on CutterCrossbar Removal Crossbar RemovalJoint Disassembly Crossbar InstallationUniversal Joint Repair Joint Assembly Assembly Instructions AssemblyDealer SET-UP Instructions Install SMV Emblem BW180HD Install Height Adjustment Cylinder BW180HDInstall Tongue BW180HD Install Wheel and Hub BW180HDJoint Drive Installation Install 3-Joint Drive 540 RPM Only BW180HDInstall Wing BW180HD Install CV Drive BW180HD- OptionalInstall Wing Cylinder & Lock-up Bar BW180HD Left Wing Lock-Up Bar Installed Install Wing Wheel and Hub All ModelsInstall Wing Driveline BW180HD Install Wing Wheel Yoke Adjustment Link BW180HDInstall Hose Kit BW180HD Winch Kit Installation OptionalChain Shielding Installation Center Section Install Chain or Belt Shielding BW180HDChain Shielding Installation Right Wing Shown Belt Shielding Installation Right Wing Dealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListMAN0805 4/30/2009 BW180HD, BW180HDQ BW180HB, BW180HBQ BW126HB, BW126HBQ PartsMain Frame Assembly Front Section Part QTY Description BW180HD Main Frame Assembly Rear Section Tire & hub see BW180HB Main Frame Assembly Rear Section REF Part QTY Description Wing Assembly See Wing & Center Gearbox Assembly Center Gear, 540 rpm Splitter Gearbox AssemblyCenter Deck Drive Assembly Front Drive Assembly Equal Angle Rear Drive Assembly Equal Angle Type a 540 RPM & 1000 RPM Front CV Drive Type B 540 RPM & 1000 RPM Front CV Drive Wing Drive Assembly Bolt Wheel & Tire Assembly 1027468 Rubber Shielding Wing Front & Rear Standard on BW180 Models Single ROW Double ROW Chain Shielding Center Section Front & RearSingle ROW Chain Shielding Wing Front & RearHydraulic Cylinders Hydraulic Cylinder Stroke Control KIT Crossbar Puller OptionalBW126HB / BW126HBQ Weight BOX Assembly Optional Winch KIT Optional Winch Kit InstallationWinch Kit Operation SAE Series Torque Chart Bolt Torque ChartAppendix Metric SeriesAbbreviations Bolt Size ChartIndex IndexWarranty Rev /23/2005

BW180HDQ, BW180HD, BW180HB specifications

Woods Equipment has long been a leader in the agricultural and landscaping industry, providing exceptional products that enhance productivity and efficiency. Among its standout offerings are the BW180HB, BW180HD, and BW180HDQ models. These versatile implements are primarily designed for use with tractors, making them invaluable for a variety of tasks.

The BW180HB model is known for its high-performance capabilities combined with a compact design. One of its main features is its heavy-duty construction, which ensures durability and longevity even under strenuous conditions. The implement is equipped with a balanced weight distribution system that allows for better stability and control during operation. Additionally, the BW180HB is designed to handle a range of tasks from grading and leveling to scraping and light dozing.

Moving up the series, the BW180HD offers a higher capacity and is built for more demanding applications. This model features a robust hydraulic system that enhances lifting capabilities, allowing operators to tackle heavier loads with ease. Its advanced blade adjustment features allow for precise angle and depth control, making it ideal for a variety of terrains. The BW180HD is particularly praised for its reliability in tough environments, thanks to its reinforced frame and high-quality materials.

The BW180HDQ model represents the pinnacle of Woods Equipment's offerings in this series. It features all the capabilities of the BW180HD but includes advanced technological enhancements for improved performance. The inclusion of an automated hydraulic control system streamlines operations, enabling operators to adjust settings on-the-fly to adapt to changing conditions. Additionally, the BW180HDQ comes with integrated safety features that protect both the operator and the equipment during use.

All three models share several common characteristics that make them preferred choices among landscaping and construction professionals. They are compatible with a wide range of tractor types, ensuring versatility for various users. The quick-connect attachment points allow for rapid changes between implements, saving time and increasing productivity. With easy maintenance designs, these models ensure that downtime is minimized, allowing operators to focus on the task at hand.

In summary, the Woods Equipment BW180HB, BW180HD, and BW180HDQ models are exceptional tools for anyone looking to enhance their operational efficiency in agriculture or landscaping. With their robust features, advanced technologies, and commitment to durability, these implements represent some of the best options available in the market today.