Symbol Technologies C350 Stopping the Engine, Engine Idle Adjustment, Shoulder Strap/Harness

Page 14

Stopping the Engine

Idle the engine briefly before stop- ping, then slide the ON-OFF switch to the “O” (for STOP) position.

WARNING!

The cutting attachment con- tinues rotating for a while after

the switch is turned off.

C350/B450

T350

Engine Idle Adjustment

The engine must return to idle speed whenever the throttle lever is re- leased. Idle speed is adjustable, and must be set low enough to permit the engine clutch to disengage the cut- ting attachment when the throttle is released.

WARNING!

The cutting attachment must NEVER rotate at engine idle!

If the idle speed can not be adjusted by the procedure described here, have the unit inspected at an authorized Shindaiwa dealer.

Idle Adjust

Screw

(1)Place the unit on the ground, then start the engine and allow it to idle for 2-3 minutes until warm.

(2)If the attachment rotates when the engine is at idle, reduce the idle speed by turning the idle adjustment screw counterclockwise.

(3)If a tachometer is available, the engine idle speed should be adjusted to 2,750 min-1(rpm)

NOTE:

Carburetor fuel mixture adjustments are preset at the factory on units with emission control systems and cannot be serviced in the field.

Shoulder Strap/Harness

To Wear the Strap

(1)Attach the strap hook to the hanger on the outer pipe.

(2)Wear the strap so that the hook stays at your right side.

(3)Adjust the length of the strap so that you can hold and operate the machine comfortably.

(4)Make sure the hip pad stays be- tween your hip and outer pipe. (B450 ONLY)

C350

B450

T350

Emergency Release

In case of emergency, firmly pull the white tab at the hook. The machine will release from the strap.

C350/B450 T350

IMPORTANT!

Adjust the shoulder strap so the shoulder pad rests comfortably on the off-side shoulder and the cutting path of the cutting attachements is parallel to the ground. Make sure all hooks and adjustment devices are secure.

WARNING!

Always wear a harness when operating this unit with a blade.

NOTE:

Using a harness with a bruscutter allows you to maintain proper control of the unit and reduces fatigue during extended operation.

Double Shoulder Harness

Adjust the double shoulder harness straps so the shoulder pads rest comfortably on the offside of the shoulder and the cutting path of the blade is parallel to the ground. Make sure all hooks and adjusting devices are secure.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents T350 Grass Trimmer C350/B450 Brushcutter Contents IntroductionUse Good Judgment General Safety InstructionsWork Safely Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSafety Labels Checking Unit ConditionSpecifications Unit DescriptionAssembly Procedure Prior to AssemblyT350 Assembly of the Outer Tube C350/B450Assembling the Outer Tube Loosen the 2 joint bolts fullyThrottle Cable Adjustment Assembly of the Handle T350Assembly of the Handle C350/B450 If free-play is out of specificationsTighten the lower clamp bolt and nut securely Cutting Attachment Shield AssemblyCutting Attachment Shield Installing a Blade Remove the hex wrenchMixing Fuel Filling The Fuel TankStarting a Cold Engine and/or Restarting After Refueling When the engine startsStarting the Engine Starting a Warm EngineShoulder Strap/Harness Engine Idle AdjustmentStopping the Engine Recommended Cutting Attachments Using a BladeOperation BladesEngine Operating Speeds Using a Brushcutter With a Trimmer Head MaintenanceDaily Maintenance Trimming and Mowing GrassHour Maintenance Muffler MaintenanceWith the file or a grinder, file a blade as follows Long Term StorageBlade Sharpening Troubleshooting Guide Possible CauseWhat To Check Additional Problems Declaration Conformity Declaration of ConformityDeclaration Conformity

C350, T350, B450 specifications

Symbol Technologies, a well-known brand in the automatic identification and data capture industry, offers a range of mobile computing devices that cater to various business and industrial needs. The B450, T350, and C350 are three notable devices that stand out for their performance, durability, and advanced technologies.

The Symbol B450 is a rugged mobile computer specifically designed for demanding environments. It features a high-resolution touchscreen that allows for easy navigation even in challenging lighting conditions. One of its main features is the integrated barcode scanner, which supports various barcode formats, enabling quick and accurate data capture. The B450 is powered by a robust operating system, ensuring smooth operation and compatibility with a wide range of applications. Its long-lasting battery life is another key characteristic, supporting extended use without frequent recharging.

Next in line, the Symbol T350 is a versatile handheld device that excels in inventory management and retail applications. It includes a compact design, making it easy to handle for prolonged periods. One of its standout technologies is the advanced 4G LTE connectivity, which allows for real-time data transmission, enhancing operational efficiency. The T350 also offers an intuitive user interface, simplifying the training process for new users. With its built-in RFID technology, businesses can improve their asset tracking capabilities, making the device an invaluable tool for warehouse and supply chain management.

Finally, the Symbol C350 combines the functionality of both the B450 and T350, offering a comprehensive solution for businesses. The C350 is designed with a rugged exterior, able to withstand tough working conditions while providing all the essential features for mobile scanning and data collection. It includes a powerful backend processing unit, enabling faster data handling and analysis. The device is compatible with various enterprise applications, making it adaptable to different industries, from retail to manufacturing. With features such as Bluetooth and Wi-Fi connectivity, the C350 ensures seamless integration into existing network infrastructures.

In summary, the Symbol Technologies B450, T350, and C350 mobile computers are expertly engineered to meet the demands of modern businesses. With their innovative features, advanced technologies, and rugged designs, these devices provide versatile solutions for inventory management, asset tracking, and real-time data processing, making them essential tools for enhancing operational efficiency in various sectors.
Top Page Image Contents