Symbol Technologies B450, T350, C350 manual Mixing Fuel, Filling The Fuel Tank

Page 12

Mixing Fuel

WARNING!

Minimize the risk of fire, burns, and personal injury!

STOP engine before refueling.

ALWAYS allow the engine to cool before refueling

ALWAYS open the fuel cap slowly to allow any pressure build-up

in the tank to release fuel vapor slowly.

ALWAYS transport and store fuels in an approved container.

Avoid overfilling and wipe-up all spilled fuel. Move the engine at least 3 meters from the fueling point, storage area, and other readily flammable materials before restarting.

ALWAYS inspect the unit for fuel leaks before each use. During each refill, make sure there are no fuel leaks around the fuel cap and/ or tank. If a fuel leak is evident, stop using the unit immediately. Fuel leaks must be repaired before using the unit.

NEVER smoke or light any fires near the engine or fuel source.

NEVER place any flammable ma- terial near the engine or muffler.

NEVER operate the engine without the muffler in good working condi- tion.

ALWAYS move the unit to a place well away from a fuel storage area or other readily flammable materi- als before starting the engine.

CAUTION!

This engine is designed to operate on a 50:1 mixture consisting of unleaded gasoline and a premium 2-cycle mixing oil only. Use of Non-approved mixing oils can lead to excessive maintenance costs and/or engine damage.

CAUTION!

Some gasolines contain alcohol as an oxygenate! Oxygenated fuels may cause increased operating tem- peratures. Under certain conditions, alcohol-based fuels may also reduce the lubricating qualities of some mixing oils. Never use any fuel containing more than 10% alcohol by volume! Generic oils and some outboard motor oils may not be intended for use in high-performance air cooled 2-cycle engines, and should never be used in your Shindaiwa engine!

Filling The Fuel Tank

IMPORTANT!

Mix only enough fuel for your immediate needs! If fuel must be stored longer than 30-days, it should first be treated with a stabilizer such as StaBil™ or equivalent product!

Use only fresh, clean unleaded gasoline with a pump octane rating of 87 or higher.

Mixing fuel with a Premium 2-cycle mixing oil designed for use with high- performance 2-cycle air-cooled engines.

Refer to the following examples of 50:1 fuel to oil mix quantaties:

Gasoline

2-cycle mixing oil

liters

milliliters

2.5 l

50 ml

5 l

100 ml

10 l

200 ml

20 l

400 ml

CAUTION!

Never attempt to mix fuel in the unit’s fuel tank. Always mix all fuels in a clean approved container.

1.Place the unit on a flat, level surface, and wipe any debris from around the fuel cap.

2.Remove the fuel cap.

3.Fill the tank with clean, fresh fuel.

4.Replace the cap, and wipe away any spilled fuel before starting the engine.

12

Image 12
Contents T350 Grass Trimmer C350/B450 Brushcutter Contents IntroductionGeneral Safety Instructions Work SafelyUse Good Judgment Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSafety Labels Checking Unit ConditionSpecifications Unit DescriptionAssembly Procedure Prior to AssemblyAssembly of the Outer Tube C350/B450 Assembling the Outer TubeT350 Loosen the 2 joint bolts fullyAssembly of the Handle T350 Assembly of the Handle C350/B450Throttle Cable Adjustment If free-play is out of specificationsCutting Attachment Shield Assembly Cutting Attachment ShieldTighten the lower clamp bolt and nut securely Installing a Blade Remove the hex wrenchMixing Fuel Filling The Fuel TankWhen the engine starts Starting the EngineStarting a Cold Engine and/or Restarting After Refueling Starting a Warm EngineEngine Idle Adjustment Stopping the EngineShoulder Strap/Harness Using a Blade OperationRecommended Cutting Attachments BladesUsing a Brushcutter With a Trimmer Head Maintenance Daily MaintenanceEngine Operating Speeds Trimming and Mowing GrassHour Maintenance Muffler MaintenanceLong Term Storage Blade SharpeningWith the file or a grinder, file a blade as follows Troubleshooting Guide Possible CauseWhat To Check Additional Problems Declaration Conformity Declaration of ConformityDeclaration Conformity

C350, T350, B450 specifications

Symbol Technologies, a well-known brand in the automatic identification and data capture industry, offers a range of mobile computing devices that cater to various business and industrial needs. The B450, T350, and C350 are three notable devices that stand out for their performance, durability, and advanced technologies.

The Symbol B450 is a rugged mobile computer specifically designed for demanding environments. It features a high-resolution touchscreen that allows for easy navigation even in challenging lighting conditions. One of its main features is the integrated barcode scanner, which supports various barcode formats, enabling quick and accurate data capture. The B450 is powered by a robust operating system, ensuring smooth operation and compatibility with a wide range of applications. Its long-lasting battery life is another key characteristic, supporting extended use without frequent recharging.

Next in line, the Symbol T350 is a versatile handheld device that excels in inventory management and retail applications. It includes a compact design, making it easy to handle for prolonged periods. One of its standout technologies is the advanced 4G LTE connectivity, which allows for real-time data transmission, enhancing operational efficiency. The T350 also offers an intuitive user interface, simplifying the training process for new users. With its built-in RFID technology, businesses can improve their asset tracking capabilities, making the device an invaluable tool for warehouse and supply chain management.

Finally, the Symbol C350 combines the functionality of both the B450 and T350, offering a comprehensive solution for businesses. The C350 is designed with a rugged exterior, able to withstand tough working conditions while providing all the essential features for mobile scanning and data collection. It includes a powerful backend processing unit, enabling faster data handling and analysis. The device is compatible with various enterprise applications, making it adaptable to different industries, from retail to manufacturing. With features such as Bluetooth and Wi-Fi connectivity, the C350 ensures seamless integration into existing network infrastructures.

In summary, the Symbol Technologies B450, T350, and C350 mobile computers are expertly engineered to meet the demands of modern businesses. With their innovative features, advanced technologies, and rugged designs, these devices provide versatile solutions for inventory management, asset tracking, and real-time data processing, making them essential tools for enhancing operational efficiency in various sectors.