Symbol Technologies B450, T350 Operation, Recommended Cutting Attachments, Using a Blade, Blades

Page 15

Operation

Using A Blade

(1)After starting the engine, pull the throttle lever gradually. The engine speed increases and the blade will start rotating.

(2)When the throttle lever is released, the engine goes back to idle speed automatically.

(3)Operate the machine at full throttle while cutting. Best fuel efficiency is obtained by releasing the throttle when swinging back after cut.

(4)The blade rotates counterclockwise. For best performance and to minimize being stuck by debris, move the blade from right to left while advancing on your work.

WARNING!

Position the blade so cuts are made between blade’s

8 o’clock and 10 o’clock positions (as viewed from above). DO NOT cut between the 11 o’clock and 5 o’clock positions.

CAUTION!

To prevent possible engine damage, do not allow the machine to run at high speeds without a load.Avoid operating the engine at low speeds. Doing so can lead to rapid clutch wear. In addition, slow-speed operation tends to cause grass and debris to wrap around the cutting attachment.

Ten

O'ClockDirection of

Rotation

Recommended Cutting Attachments

Make sure to use the following rec- ommended Shindaiwa cutting attach- ment with this machine.

Blades

PART NUMBER 60903-98310

8-TOOTH BLADE

INNER BORE: 25.4mm

DIAMETER: 255.0mm

THICKNESS: 2.0mm

PART NUMBER 72430-92142

3-TOOTH BLADE

INNER BORE: 25.4mm

DIAMETER: 255.0mm

THICKNESS: 2.2mm

PART NUMBER 60903-98320

4-TOOTH BLADE

INNER BORE: 25.4mm

DIAMETER: 255.0mm

THICKNESS: 2.0mm

Trimmer Heads

(A) C350

PART NUMBER 78820-16000

TAP & FEED TRIMMER HEAD BOLT DIAMETER: 10mm THREAD: LEFT,1.25mm PITCH

(B) B450

PART NUMBER 78820-14000

WARNING!

“BLADETHRUST” is a sudden sideway or backward motion of the machine. Such motion may

occur when the blade jams or catches on an object such as a sapling tree or tree stump. BE CONSTANTLY ALERT FOR BLADE THRUST AND GUARD AGAINST ITS EFFECTS.

OK TO CUT

Eight

O'Clock

DO NOT CUT

SEMI-AUTOMATIC TRIMMER HEAD

BOLT DIAMETER: 10mm

THREAD: LEFT,1.25mm PITCH

(C) T350

PART NUMBER 78820-15000

TAP & FEED TRIMMER HEAD BOLT DIAMETER: 8mm THREAD: LEFT,1.25mm PITCH

CAUTION!

DO NOT use 2-tooth blades with this machine.

WARNING!

NEVER strike or slam the spinning blade against the wood.

WARNING!

When transporting, make sure the engine is not running and

blade is covered with blade cover.

15

Image 15
Contents T350 Grass Trimmer C350/B450 Brushcutter Introduction ContentsStay Alert General Safety InstructionsWork Safely Use Good JudgmentBe Aware of the Working Environment Properly Equipped OperatorChecking Unit Condition Safety LabelsUnit Description SpecificationsPrior to Assembly Assembly ProcedureLoosen the 2 joint bolts fully Assembly of the Outer Tube C350/B450Assembling the Outer Tube T350If free-play is out of specifications Assembly of the Handle T350Assembly of the Handle C350/B450 Throttle Cable AdjustmentCutting Attachment Shield Assembly Cutting Attachment ShieldTighten the lower clamp bolt and nut securely Remove the hex wrench Installing a BladeFilling The Fuel Tank Mixing FuelStarting a Warm Engine When the engine startsStarting the Engine Starting a Cold Engine and/or Restarting After RefuelingEngine Idle Adjustment Stopping the EngineShoulder Strap/Harness Blades Using a BladeOperation Recommended Cutting AttachmentsTrimming and Mowing Grass Using a Brushcutter With a Trimmer Head MaintenanceDaily Maintenance Engine Operating SpeedsMuffler Maintenance Hour MaintenanceLong Term Storage Blade SharpeningWith the file or a grinder, file a blade as follows Possible Cause Troubleshooting GuideWhat To Check Additional Problems Declaration of Conformity Declaration ConformityDeclaration Conformity

C350, T350, B450 specifications

Symbol Technologies, a well-known brand in the automatic identification and data capture industry, offers a range of mobile computing devices that cater to various business and industrial needs. The B450, T350, and C350 are three notable devices that stand out for their performance, durability, and advanced technologies.

The Symbol B450 is a rugged mobile computer specifically designed for demanding environments. It features a high-resolution touchscreen that allows for easy navigation even in challenging lighting conditions. One of its main features is the integrated barcode scanner, which supports various barcode formats, enabling quick and accurate data capture. The B450 is powered by a robust operating system, ensuring smooth operation and compatibility with a wide range of applications. Its long-lasting battery life is another key characteristic, supporting extended use without frequent recharging.

Next in line, the Symbol T350 is a versatile handheld device that excels in inventory management and retail applications. It includes a compact design, making it easy to handle for prolonged periods. One of its standout technologies is the advanced 4G LTE connectivity, which allows for real-time data transmission, enhancing operational efficiency. The T350 also offers an intuitive user interface, simplifying the training process for new users. With its built-in RFID technology, businesses can improve their asset tracking capabilities, making the device an invaluable tool for warehouse and supply chain management.

Finally, the Symbol C350 combines the functionality of both the B450 and T350, offering a comprehensive solution for businesses. The C350 is designed with a rugged exterior, able to withstand tough working conditions while providing all the essential features for mobile scanning and data collection. It includes a powerful backend processing unit, enabling faster data handling and analysis. The device is compatible with various enterprise applications, making it adaptable to different industries, from retail to manufacturing. With features such as Bluetooth and Wi-Fi connectivity, the C350 ensures seamless integration into existing network infrastructures.

In summary, the Symbol Technologies B450, T350, and C350 mobile computers are expertly engineered to meet the demands of modern businesses. With their innovative features, advanced technologies, and rugged designs, these devices provide versatile solutions for inventory management, asset tracking, and real-time data processing, making them essential tools for enhancing operational efficiency in various sectors.