Symbol Technologies manual Assembly of the Handle T350, Assembly of the Handle C350/B450

Page 9

Assembly of the Handle T350

WARNING!

NEVER operate this machine without the front handle. Oper- ating without the front handle may result

in serious injury.

NOTE:

Tighten four bolts diagonally to properly secure the handle.

NOTE:

Adjust the handle at the best position for operator comfort.

(1)Put four square nuts in the recess- es on the underside of the barrier.

(2)Fit the handle and barrier over the outer tube and tighten four bolts in a crisscross fashion.

HANDLE

OUTER TUBE

BARRIER

BOLT BARRIER

NUT

Assembly of the Handle C350/B450

(1)Loosen the two bolts of the lower cap and remove the lower cap.

(2)Position the handle bracket against the handle label located on the outer tube.

(3)Attach the lower cap with the two bolts and tighten the bolts. Make sure the front handle is in position per the illustration.

(4)Secure the cable to the outer pipe with the two bands as the illustration shows. The two bands are in the tool bag.

HANDLEBAR

HANDLE BRACKET

THROTTLE GRIP

 

HANDLE LABEL

BOLT

LOWER CAP

BAND

Throttle Cable Adjustment

(1)Pull the throttle trigger gently, and check for free-play of approximately 5mm.

(2)If free-play is out of specifications:

(a)Slide the cable cap toward the muffler side until the adjusting nut and the lock nut appear.

(b)Loosen the lock nut slightly.

(c)Turn the adjusting nut so that free-play is about 5mm.

(d)Then, tighten the lock nut.

(e)Slide the cable cap back.

THROTTLE CABLE

CABLE CAP

ADJUSTING NUT

LOCK NUT

Page 8 Page 10
Image 9
Page 8 Page 10
Contents T350 Grass Trimmer C350/B450 Brushcutter Introduction ContentsWork Safely General Safety InstructionsUse Good Judgment Stay AlertBe Aware of the Working Environment Properly Equipped OperatorChecking Unit Condition Safety LabelsUnit Description SpecificationsPrior to Assembly Assembly ProcedureAssembling the Outer Tube Assembly of the Outer Tube C350/B450T350 Loosen the 2 joint bolts fullyAssembly of the Handle C350/B450 Assembly of the Handle T350Throttle Cable Adjustment If free-play is out of specificationsCutting Attachment Shield Assembly Cutting Attachment ShieldTighten the lower clamp bolt and nut securely Remove the hex wrench Installing a BladeFilling The Fuel Tank Mixing FuelStarting the Engine When the engine startsStarting a Cold Engine and/or Restarting After Refueling Starting a Warm EngineEngine Idle Adjustment Stopping the EngineShoulder Strap/Harness Operation Using a BladeRecommended Cutting Attachments BladesDaily Maintenance Using a Brushcutter With a Trimmer Head MaintenanceEngine Operating Speeds Trimming and Mowing GrassMuffler Maintenance Hour MaintenanceLong Term Storage Blade SharpeningWith the file or a grinder, file a blade as follows Possible Cause Troubleshooting GuideWhat To Check Additional Problems Declaration of Conformity Declaration ConformityDeclaration Conformity

C350, T350, B450 specifications

Symbol Technologies, a well-known brand in the automatic identification and data capture industry, offers a range of mobile computing devices that cater to various business and industrial needs. The B450, T350, and C350 are three notable devices that stand out for their performance, durability, and advanced technologies.

The Symbol B450 is a rugged mobile computer specifically designed for demanding environments. It features a high-resolution touchscreen that allows for easy navigation even in challenging lighting conditions. One of its main features is the integrated barcode scanner, which supports various barcode formats, enabling quick and accurate data capture. The B450 is powered by a robust operating system, ensuring smooth operation and compatibility with a wide range of applications. Its long-lasting battery life is another key characteristic, supporting extended use without frequent recharging.

Next in line, the Symbol T350 is a versatile handheld device that excels in inventory management and retail applications. It includes a compact design, making it easy to handle for prolonged periods. One of its standout technologies is the advanced 4G LTE connectivity, which allows for real-time data transmission, enhancing operational efficiency. The T350 also offers an intuitive user interface, simplifying the training process for new users. With its built-in RFID technology, businesses can improve their asset tracking capabilities, making the device an invaluable tool for warehouse and supply chain management.

Finally, the Symbol C350 combines the functionality of both the B450 and T350, offering a comprehensive solution for businesses. The C350 is designed with a rugged exterior, able to withstand tough working conditions while providing all the essential features for mobile scanning and data collection. It includes a powerful backend processing unit, enabling faster data handling and analysis. The device is compatible with various enterprise applications, making it adaptable to different industries, from retail to manufacturing. With features such as Bluetooth and Wi-Fi connectivity, the C350 ensures seamless integration into existing network infrastructures.

In summary, the Symbol Technologies B450, T350, and C350 mobile computers are expertly engineered to meet the demands of modern businesses. With their innovative features, advanced technologies, and rugged designs, these devices provide versatile solutions for inventory management, asset tracking, and real-time data processing, making them essential tools for enhancing operational efficiency in various sectors.
Top Page Image Contents