Symbol Technologies T350 Starting the Engine, Starting a Warm Engine, When the engine starts

Page 13

Starting the Engine

WARNING!

MAKE SURE THE BLADE IS WELL CLEAR OF ANY INTERFERENCE. Before starting the engine, place unit on clear, level surface. Make sure you have good secure footing and always keep a firm grip on the machine. THE CUTTING ATTACHMENT MAY ROTATE WHEN

THE ENGINE STARTS.

WARNING!

Move at least three meters away from the fuel site before

starting the engine.

WARNING!

Never operate the engine without the cutting attach-

ment installed.

Starting a Cold Engine and/or Restarting After Refueling.

T350

C350/B450

THROTTLE

LEVER

ON-OFF SWITCH

THROTTLE LOCK

BUTTON

LOCK LEVER

(a)Slide the ON-OFF switch to the “I” position.

(b)Prime the engine by repeatedly de- pressing the carburetor primer bulb until fuel can be seen flowing through the transparent overflow return tube:

OVERFLOW TUBE

(c) Push the choke lever upward

(“ closed“ position). (Cold engine.)

Make sure the cutting attachment is clear of obstructions.

(d)Depressing the lock lever, pull the throttle lever fully and depress the throttle lock button. While depressing the throttle lock button, release the throttle lever and the lock lever. Now the throttle stays at high idle (starting speed).

(e)While firmly holding the outer tube with one hand, pull the recoil starter handle upward with your other hand.

Pull slowly at first until you feel the starter engage, then pull quickly to start the engine. Do not pull the starter rope to the end of its travel.

CAUTION!

Pulling the starter rope to the end of its travel may damage the starter mechanism.

IMPORTANT!

Repeated cranking of the engine with the choke CLOSED (“ “) will lead to engine flooding. If the engine fails to start after several attempts, move the choke lever to the OPEN position and continue cranking.

(f)When the engine first fires, gradu- ally return the choke to OPEN

(“ ”) position if you have not al- ready done so.

• If the engine stops before the choke is fully open, restart with the choke closed.

• If the engine stops after the initial firing, restart with choke closed.

(g)When the engine starts and is run- ning, set the engine to idle by tap- ping the throttle lever to release the throttle lock.

WARNING!

Never start the engine from the operating position.

Starting a Warm Engine

Starting a warm engine involves all of the steps of starting a cold engine.

EXCEPT:

•The choke should be in the OPEN position.

If the engine does not start, follow the cold engine starting procedure.

When the engine starts:

•After the engine starts, disengage the throttle lock and allow the engine to warm-up at idle for 2 or 3 minutes before operating the machine.

•After the engine is warm, pick up the machine and clip-on the strap.

•Advancing the throttle makes the cutting attachment rotate faster; re- leasing the throttle makes the attach- ment stop running. If the cutting at- tachment continues to rotate, carbu- retor idle speed should be adjusted. (See next page.)

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents T350 Grass Trimmer C350/B450 Brushcutter Introduction ContentsWork Safely General Safety InstructionsUse Good Judgment Stay AlertBe Aware of the Working Environment Properly Equipped OperatorChecking Unit Condition Safety LabelsUnit Description SpecificationsPrior to Assembly Assembly ProcedureAssembling the Outer Tube Assembly of the Outer Tube C350/B450T350 Loosen the 2 joint bolts fullyAssembly of the Handle C350/B450 Assembly of the Handle T350Throttle Cable Adjustment If free-play is out of specificationsCutting Attachment Shield Cutting Attachment Shield AssemblyTighten the lower clamp bolt and nut securely Remove the hex wrench Installing a BladeFilling The Fuel Tank Mixing FuelStarting the Engine When the engine startsStarting a Cold Engine and/or Restarting After Refueling Starting a Warm EngineStopping the Engine Engine Idle AdjustmentShoulder Strap/Harness Operation Using a BladeRecommended Cutting Attachments BladesDaily Maintenance Using a Brushcutter With a Trimmer Head MaintenanceEngine Operating Speeds Trimming and Mowing GrassMuffler Maintenance Hour MaintenanceBlade Sharpening Long Term StorageWith the file or a grinder, file a blade as follows Possible Cause Troubleshooting GuideWhat To Check Additional Problems Declaration of Conformity Declaration ConformityDeclaration Conformity

C350, T350, B450 specifications

Symbol Technologies, a well-known brand in the automatic identification and data capture industry, offers a range of mobile computing devices that cater to various business and industrial needs. The B450, T350, and C350 are three notable devices that stand out for their performance, durability, and advanced technologies.

The Symbol B450 is a rugged mobile computer specifically designed for demanding environments. It features a high-resolution touchscreen that allows for easy navigation even in challenging lighting conditions. One of its main features is the integrated barcode scanner, which supports various barcode formats, enabling quick and accurate data capture. The B450 is powered by a robust operating system, ensuring smooth operation and compatibility with a wide range of applications. Its long-lasting battery life is another key characteristic, supporting extended use without frequent recharging.

Next in line, the Symbol T350 is a versatile handheld device that excels in inventory management and retail applications. It includes a compact design, making it easy to handle for prolonged periods. One of its standout technologies is the advanced 4G LTE connectivity, which allows for real-time data transmission, enhancing operational efficiency. The T350 also offers an intuitive user interface, simplifying the training process for new users. With its built-in RFID technology, businesses can improve their asset tracking capabilities, making the device an invaluable tool for warehouse and supply chain management.

Finally, the Symbol C350 combines the functionality of both the B450 and T350, offering a comprehensive solution for businesses. The C350 is designed with a rugged exterior, able to withstand tough working conditions while providing all the essential features for mobile scanning and data collection. It includes a powerful backend processing unit, enabling faster data handling and analysis. The device is compatible with various enterprise applications, making it adaptable to different industries, from retail to manufacturing. With features such as Bluetooth and Wi-Fi connectivity, the C350 ensures seamless integration into existing network infrastructures.

In summary, the Symbol Technologies B450, T350, and C350 mobile computers are expertly engineered to meet the demands of modern businesses. With their innovative features, advanced technologies, and rugged designs, these devices provide versatile solutions for inventory management, asset tracking, and real-time data processing, making them essential tools for enhancing operational efficiency in various sectors.
Top Page Image Contents