Symbol Technologies C350, B450, T350 manual Installing a Blade, Remove the hex wrench

Page 11

Installing a Blade

(1)Make sure the switch is off and the engine is stopped.

(2)Wear gloves to protect your hands.

(3)Turn the unit over so the saw holder flange extending from the gear case is facing up.

(4)Using the small end of the plug wrench, loosen the bolt (turn clock- wise) and remove the bolt, bolt guard, and holder B.

(5)Slide the safety clip as shown in the illustration.

SHAFT BOLT

BOLT GUARD

HOLDER B

SAFETY CLIPS

HOLDER A

GEAR SHAFT

SAFETY CLIP

SAFETY CLIP

BLADE

HOLDER A

WARNING!

Never operate this machine without the safety clip in place.

(6)Fit the blade over the safety clip onto holder A. Then, slide the safety clip back to its original position.

WARNING!

The blade must fit flat against holderA. The blade’s mounting hole must be centered over the raised

boss of holder A.

(7)Put holder B and bolt guard back and at this time only finger tighten the bolt.

Make sure holder B is flat against the blade and the recess in holder B must face the blade and completely cover the safety clip.

(8)Rotate holder A until the hole in its skirt aligns with the hole in the gear case. Insert the hex wrench through both holes (to prevent the shaft from turning).

(9)Holding the hex wrench and blade with one hand, tighten the bolt (turn counterclockwise) securely using the hex socket end of the plug wrench.

(10)Remove the hex wrench.

WARNING!

Before operating, make sure the blade is securely mounted.

Turn the blade with your hand slightly and make sure the blade turns smoothly without wobbling.

WARNING!

The blade must fit flat. Make sure the direction of the arrow indicated on the blade corresponds with the arrow indicated on the cutting

attachment shield.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents T350 Grass Trimmer C350/B450 Brushcutter Introduction ContentsStay Alert General Safety InstructionsWork Safely Use Good JudgmentBe Aware of the Working Environment Properly Equipped OperatorChecking Unit Condition Safety LabelsUnit Description SpecificationsPrior to Assembly Assembly ProcedureLoosen the 2 joint bolts fully Assembly of the Outer Tube C350/B450Assembling the Outer Tube T350If free-play is out of specifications Assembly of the Handle T350Assembly of the Handle C350/B450 Throttle Cable AdjustmentTighten the lower clamp bolt and nut securely Cutting Attachment Shield AssemblyCutting Attachment Shield Remove the hex wrench Installing a BladeFilling The Fuel Tank Mixing FuelStarting a Warm Engine When the engine startsStarting the Engine Starting a Cold Engine and/or Restarting After RefuelingShoulder Strap/Harness Engine Idle AdjustmentStopping the Engine Blades Using a BladeOperation Recommended Cutting AttachmentsTrimming and Mowing Grass Using a Brushcutter With a Trimmer Head MaintenanceDaily Maintenance Engine Operating SpeedsMuffler Maintenance Hour MaintenanceWith the file or a grinder, file a blade as follows Long Term StorageBlade Sharpening Possible Cause Troubleshooting GuideWhat To Check Additional Problems Declaration of Conformity Declaration ConformityDeclaration Conformity

C350, T350, B450 specifications

Symbol Technologies, a well-known brand in the automatic identification and data capture industry, offers a range of mobile computing devices that cater to various business and industrial needs. The B450, T350, and C350 are three notable devices that stand out for their performance, durability, and advanced technologies.

The Symbol B450 is a rugged mobile computer specifically designed for demanding environments. It features a high-resolution touchscreen that allows for easy navigation even in challenging lighting conditions. One of its main features is the integrated barcode scanner, which supports various barcode formats, enabling quick and accurate data capture. The B450 is powered by a robust operating system, ensuring smooth operation and compatibility with a wide range of applications. Its long-lasting battery life is another key characteristic, supporting extended use without frequent recharging.

Next in line, the Symbol T350 is a versatile handheld device that excels in inventory management and retail applications. It includes a compact design, making it easy to handle for prolonged periods. One of its standout technologies is the advanced 4G LTE connectivity, which allows for real-time data transmission, enhancing operational efficiency. The T350 also offers an intuitive user interface, simplifying the training process for new users. With its built-in RFID technology, businesses can improve their asset tracking capabilities, making the device an invaluable tool for warehouse and supply chain management.

Finally, the Symbol C350 combines the functionality of both the B450 and T350, offering a comprehensive solution for businesses. The C350 is designed with a rugged exterior, able to withstand tough working conditions while providing all the essential features for mobile scanning and data collection. It includes a powerful backend processing unit, enabling faster data handling and analysis. The device is compatible with various enterprise applications, making it adaptable to different industries, from retail to manufacturing. With features such as Bluetooth and Wi-Fi connectivity, the C350 ensures seamless integration into existing network infrastructures.

In summary, the Symbol Technologies B450, T350, and C350 mobile computers are expertly engineered to meet the demands of modern businesses. With their innovative features, advanced technologies, and rugged designs, these devices provide versatile solutions for inventory management, asset tracking, and real-time data processing, making them essential tools for enhancing operational efficiency in various sectors.
Top Page Image Contents