Symbol Technologies B450, T350, C350 manual Long Term Storage, Blade Sharpening

Page 18

Long Term Storage

Whenever the unit will not be used for 30 days or longer, use the following procedures to prepare it for storage:

Clean external parts thoroughly and apply a light coating of oil to all metal surfaces.

Drain all the fuel from the fuel tank.

IMPORTANT!

All stored fuels should be stabilized with a fuel stabilizer such as STA-BIL™.

Blade Sharpening

With the file or a grinder, file a blade as follows.

WARNING!

Sharpen only the cutting teeth of a blade. DO NOT alter the

contour of the blade in any way. In order to keep the blade in balance, all cutting edges must be sharpened equally. DO NOT file the tips of the teeth too sharp.

Make sure the width of the 3 sides/

4 sides is all the same.

To remove the remaining fuel from the fuel lines and carburetor and with the fuel drained from the fuel tank.

1.Prime the primer bulb until no more fuel is passing through.

2.Start and run the engine until stops running.

3.Repeat steps 1 and 2 until the engine will no longer start.

CAUTION!

Gasoline stored in the carburetor for extended periods can cause hard starting, and could also lead to increased service and maintenance costs.

Remove the spark plug and pour about 7 grams of 2-cycle mixing oil into the cylinder through the spark plug hole. Slowly pull the recoil starter 2 or 3 times so oil will evenly coat the interior of the engine. Reinstall the spark plug.

Before storing the unit, repair or replace any worn or damaged parts.

Remove the air cleaner element from the carburetor and clean it thoroughly with soap and water. Let dry and reassemble the element.

Store the unit in a clean, dust-free area.

The sharpening angle should be 45° approx.

Do not file the tips of the blade too sharp.

Leave 0.2~0.5mm unsharpened.

The bottom of each tooth must remain unsharpened.

(Blade as viewed from bottom)

4-Tooth Blade

8-Tooth Blade

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents T350 Grass Trimmer C350/B450 Brushcutter Contents IntroductionUse Good Judgment General Safety InstructionsWork Safely Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSafety Labels Checking Unit ConditionSpecifications Unit DescriptionAssembly Procedure Prior to AssemblyT350 Assembly of the Outer Tube C350/B450Assembling the Outer Tube Loosen the 2 joint bolts fullyThrottle Cable Adjustment Assembly of the Handle T350Assembly of the Handle C350/B450 If free-play is out of specificationsCutting Attachment Shield Assembly Cutting Attachment ShieldTighten the lower clamp bolt and nut securely Installing a Blade Remove the hex wrenchMixing Fuel Filling The Fuel TankStarting a Cold Engine and/or Restarting After Refueling When the engine startsStarting the Engine Starting a Warm EngineEngine Idle Adjustment Stopping the EngineShoulder Strap/Harness Recommended Cutting Attachments Using a BladeOperation BladesEngine Operating Speeds Using a Brushcutter With a Trimmer Head MaintenanceDaily Maintenance Trimming and Mowing GrassHour Maintenance Muffler MaintenanceLong Term Storage Blade SharpeningWith the file or a grinder, file a blade as follows Troubleshooting Guide Possible CauseWhat To Check Additional Problems Declaration Conformity Declaration of ConformityDeclaration Conformity

C350, T350, B450 specifications

Symbol Technologies, a well-known brand in the automatic identification and data capture industry, offers a range of mobile computing devices that cater to various business and industrial needs. The B450, T350, and C350 are three notable devices that stand out for their performance, durability, and advanced technologies.

The Symbol B450 is a rugged mobile computer specifically designed for demanding environments. It features a high-resolution touchscreen that allows for easy navigation even in challenging lighting conditions. One of its main features is the integrated barcode scanner, which supports various barcode formats, enabling quick and accurate data capture. The B450 is powered by a robust operating system, ensuring smooth operation and compatibility with a wide range of applications. Its long-lasting battery life is another key characteristic, supporting extended use without frequent recharging.

Next in line, the Symbol T350 is a versatile handheld device that excels in inventory management and retail applications. It includes a compact design, making it easy to handle for prolonged periods. One of its standout technologies is the advanced 4G LTE connectivity, which allows for real-time data transmission, enhancing operational efficiency. The T350 also offers an intuitive user interface, simplifying the training process for new users. With its built-in RFID technology, businesses can improve their asset tracking capabilities, making the device an invaluable tool for warehouse and supply chain management.

Finally, the Symbol C350 combines the functionality of both the B450 and T350, offering a comprehensive solution for businesses. The C350 is designed with a rugged exterior, able to withstand tough working conditions while providing all the essential features for mobile scanning and data collection. It includes a powerful backend processing unit, enabling faster data handling and analysis. The device is compatible with various enterprise applications, making it adaptable to different industries, from retail to manufacturing. With features such as Bluetooth and Wi-Fi connectivity, the C350 ensures seamless integration into existing network infrastructures.

In summary, the Symbol Technologies B450, T350, and C350 mobile computers are expertly engineered to meet the demands of modern businesses. With their innovative features, advanced technologies, and rugged designs, these devices provide versatile solutions for inventory management, asset tracking, and real-time data processing, making them essential tools for enhancing operational efficiency in various sectors.
Top Page Image Contents