Symbol Technologies T350 Using a Brushcutter With a Trimmer Head Maintenance, Daily Maintenance

Page 16

Using a Brushcutter With a Trimmer Head

Maintenance

You may install one of several types of Shin- daiwa trimmer heads on your TC350/B450 trimmer or brushcutter, each with features for specific applications and/or operational requirements.

For proper operation, always refer to the instructions accompanying the trimmer head being used. Available trimmer head styles include:

Semi-automatic.Trimmer line is indexed when the operator taps the trim- mer head on the ground during opera- tion.

Manual. The operator indexes line man- ually with the grass trimmer stopped.

Fixed. The operator must stop the unit and add new lengths of trimmer line manually.

Flail. This device, designed for clearing weeds and light brush, features three nylon blades attached to the head by pivots.

CAUTION!

Do not push the rotating line into trees, wire fences or any material that could tangle or break line ends.

Engine Operating Speeds

Operate at full throttle while cutting grass.

CAUTION!

Operation at low rpm can lead to pre- mature clutch failure.

Trimming and Mowing Grass

Hold the grass trimmer so the trimmer head is angled slightly into the area to be cut. To ensure maximum trimmer-line service life, cut only with the tip of the trim- mer line. Cut grass by swinging the unit's trimmer head from left to right. Keep the trimmer head horizontal.

CUTTING

PATH

RETURN

PATH

23041

WARNING!

Before performing any main- tenance, repair, or cleaning work on the machine, make

sure the engine and cutting attachment are completely stopped. Disconnect the spark plug wire before performing service or maintenance work.

WARNING!

Never repair a damaged blade by welding, straighten-

ing, or by modifying its shape. An altered blade may break during op- eration, resulting in serious personal injury.

Daily Maintenance

Prior to each work day, perform the following:

Remove the dirt and debris

from the engine, check the

cooling fins and air cleaner

for clogging, and clean them

as necessary.

Carefully remove any

accumulations of dirt or

debris from the muffler and

fuel tank. Dirt buildup in

these areas can lead to

engine overheating, fire, or

premature wear.

Edging

Tilt the handle about 100° to the left (from horizontal) and move forward, holding the trimmer or brushcutter vertically as shown.

23042

Check for loose or missing

screws or components. Make

sure the cutting attachment

is securely fastened.

Check the machine for

leaking fuel or grease.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents T350 Grass Trimmer C350/B450 Brushcutter Contents IntroductionGeneral Safety Instructions Work SafelyUse Good Judgment Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSafety Labels Checking Unit ConditionSpecifications Unit DescriptionAssembly Procedure Prior to AssemblyAssembly of the Outer Tube C350/B450 Assembling the Outer TubeT350 Loosen the 2 joint bolts fullyAssembly of the Handle T350 Assembly of the Handle C350/B450Throttle Cable Adjustment If free-play is out of specificationsCutting Attachment Shield Cutting Attachment Shield AssemblyTighten the lower clamp bolt and nut securely Installing a Blade Remove the hex wrenchMixing Fuel Filling The Fuel TankWhen the engine starts Starting the EngineStarting a Cold Engine and/or Restarting After Refueling Starting a Warm EngineStopping the Engine Engine Idle AdjustmentShoulder Strap/Harness Using a Blade OperationRecommended Cutting Attachments BladesUsing a Brushcutter With a Trimmer Head Maintenance Daily MaintenanceEngine Operating Speeds Trimming and Mowing GrassHour Maintenance Muffler MaintenanceBlade Sharpening Long Term StorageWith the file or a grinder, file a blade as follows Troubleshooting Guide Possible CauseWhat To Check Additional Problems Declaration Conformity Declaration of ConformityDeclaration Conformity

C350, T350, B450 specifications

Symbol Technologies, a well-known brand in the automatic identification and data capture industry, offers a range of mobile computing devices that cater to various business and industrial needs. The B450, T350, and C350 are three notable devices that stand out for their performance, durability, and advanced technologies.

The Symbol B450 is a rugged mobile computer specifically designed for demanding environments. It features a high-resolution touchscreen that allows for easy navigation even in challenging lighting conditions. One of its main features is the integrated barcode scanner, which supports various barcode formats, enabling quick and accurate data capture. The B450 is powered by a robust operating system, ensuring smooth operation and compatibility with a wide range of applications. Its long-lasting battery life is another key characteristic, supporting extended use without frequent recharging.

Next in line, the Symbol T350 is a versatile handheld device that excels in inventory management and retail applications. It includes a compact design, making it easy to handle for prolonged periods. One of its standout technologies is the advanced 4G LTE connectivity, which allows for real-time data transmission, enhancing operational efficiency. The T350 also offers an intuitive user interface, simplifying the training process for new users. With its built-in RFID technology, businesses can improve their asset tracking capabilities, making the device an invaluable tool for warehouse and supply chain management.

Finally, the Symbol C350 combines the functionality of both the B450 and T350, offering a comprehensive solution for businesses. The C350 is designed with a rugged exterior, able to withstand tough working conditions while providing all the essential features for mobile scanning and data collection. It includes a powerful backend processing unit, enabling faster data handling and analysis. The device is compatible with various enterprise applications, making it adaptable to different industries, from retail to manufacturing. With features such as Bluetooth and Wi-Fi connectivity, the C350 ensures seamless integration into existing network infrastructures.

In summary, the Symbol Technologies B450, T350, and C350 mobile computers are expertly engineered to meet the demands of modern businesses. With their innovative features, advanced technologies, and rugged designs, these devices provide versatile solutions for inventory management, asset tracking, and real-time data processing, making them essential tools for enhancing operational efficiency in various sectors.
Top Page Image Contents