Symbol Technologies C350, B450 Assembling the Outer Tube, T350, Loosen the 2 joint bolts fully

Page 8

Assembling the Outer Tube

T350

(1) Loosen the 2 joint bolts fully.

JOINT BOLT

JOINT

GROUND WIRE

THROTTLE GRIP

(2)Slip the outer tube into the joint until the tube bottoms. The outer tube or gearcase shaft may have to be rotated slightly for the splines on the mainshaft to fully engage to the engine.

GROUND WIRE

(3)Attach the ground wire to the joint bolt.

(4)Tighten the 2 joint bolts securely.

(5)Loosen the screw which tightens the throttle lever to the outer tube. Shift the throttle lever toward the blade.

(6)Put the throttle cable into the tube. Push throttle cable through hole in rear grip.

(7)Set the throttle cable onto the throttle lever. Use the wrench so that the wire edge goes into the slot of the throttle lever securely.

NOTE:

Make sure that the throttle cable is built into the cable guide of the throttle lever.

(8)Shift the throttle lever back to original position, pulling the ground wire and throttle cable and tighten the screw securely.

(9)Remove the bolt tightening the cylinder cover.

(10)Put the bolt through the hole of the ground wire terminal and tighten the bolt.

Assembly of the Outer Tube C350/B450

(1)Loosen the 2 joint bolts fully and slip the outer tube into the joint until the tube bottoms (up to the insert label). The outer tube or gearcase shaft may have to be rotated slightly for the splines on the mainshaft to fully engage the engine.

(2)Attach the ground wire to the joint bolt.

(3)Tighten the 2 joint bolts securely.

JOINT BOLT

INSERT LABEL

GROUND WIRE

(4)Loosen the stopper bolt of the throttle grip. Remove the stopper bolt and nut.

(5)Fully loosen the clamp bolt of the throttle grip.

(6)Slip the right-side handlebar into the throttle grip. Locate the throttle grip so that the stopper bolt can pass through the stopper hole.

Securely tighten the stopper bolt and nut.

(7)Securely tighten the clamp bolt.

SCREW

Page 7 Page 9
Image 8
Page 7 Page 9
Contents T350 Grass Trimmer C350/B450 Brushcutter Contents IntroductionGeneral Safety Instructions Work SafelyUse Good Judgment Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSafety Labels Checking Unit ConditionSpecifications Unit DescriptionAssembly Procedure Prior to AssemblyAssembly of the Outer Tube C350/B450 Assembling the Outer TubeT350 Loosen the 2 joint bolts fullyAssembly of the Handle T350 Assembly of the Handle C350/B450Throttle Cable Adjustment If free-play is out of specificationsTighten the lower clamp bolt and nut securely Cutting Attachment Shield AssemblyCutting Attachment Shield Installing a Blade Remove the hex wrenchMixing Fuel Filling The Fuel TankWhen the engine starts Starting the EngineStarting a Cold Engine and/or Restarting After Refueling Starting a Warm EngineShoulder Strap/Harness Engine Idle AdjustmentStopping the Engine Using a Blade OperationRecommended Cutting Attachments BladesUsing a Brushcutter With a Trimmer Head Maintenance Daily MaintenanceEngine Operating Speeds Trimming and Mowing GrassHour Maintenance Muffler MaintenanceWith the file or a grinder, file a blade as follows Long Term StorageBlade Sharpening Troubleshooting Guide Possible CauseWhat To Check Additional Problems Declaration Conformity Declaration of ConformityDeclaration Conformity

C350, T350, B450 specifications

Symbol Technologies, a well-known brand in the automatic identification and data capture industry, offers a range of mobile computing devices that cater to various business and industrial needs. The B450, T350, and C350 are three notable devices that stand out for their performance, durability, and advanced technologies.

The Symbol B450 is a rugged mobile computer specifically designed for demanding environments. It features a high-resolution touchscreen that allows for easy navigation even in challenging lighting conditions. One of its main features is the integrated barcode scanner, which supports various barcode formats, enabling quick and accurate data capture. The B450 is powered by a robust operating system, ensuring smooth operation and compatibility with a wide range of applications. Its long-lasting battery life is another key characteristic, supporting extended use without frequent recharging.

Next in line, the Symbol T350 is a versatile handheld device that excels in inventory management and retail applications. It includes a compact design, making it easy to handle for prolonged periods. One of its standout technologies is the advanced 4G LTE connectivity, which allows for real-time data transmission, enhancing operational efficiency. The T350 also offers an intuitive user interface, simplifying the training process for new users. With its built-in RFID technology, businesses can improve their asset tracking capabilities, making the device an invaluable tool for warehouse and supply chain management.

Finally, the Symbol C350 combines the functionality of both the B450 and T350, offering a comprehensive solution for businesses. The C350 is designed with a rugged exterior, able to withstand tough working conditions while providing all the essential features for mobile scanning and data collection. It includes a powerful backend processing unit, enabling faster data handling and analysis. The device is compatible with various enterprise applications, making it adaptable to different industries, from retail to manufacturing. With features such as Bluetooth and Wi-Fi connectivity, the C350 ensures seamless integration into existing network infrastructures.

In summary, the Symbol Technologies B450, T350, and C350 mobile computers are expertly engineered to meet the demands of modern businesses. With their innovative features, advanced technologies, and rugged designs, these devices provide versatile solutions for inventory management, asset tracking, and real-time data processing, making them essential tools for enhancing operational efficiency in various sectors.
Top Page Image Contents