Yazoo/Kees ZCBI48181 manual Transport, Important Information

Page 10

SAFETY INSTRUCTIONS

Never use the machine indoors or in spaces lacking proper ventilation. The exhaust fumes contain carbon monoxide, an odorless, poisonous, and lethal gas.

Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting.

Never make adjustments with the engine running.

The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer.

The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them.

Check the parking brake’s functionality regularly. Adjust and service as necessary.

The mulch deck shall only be used when higher quality mowing is desired in familiar areas.

Reduce the risk of fire by removing grass, leaves, and other debris that may have accumulated on the machine. Allow the machine to cool before putting it in storage.

Transport

Never drive the machine in an enclosed space 8011-515

The machine is heavy and can cause serious

 

crushing injuries. Be extra cautious when it is

 

loaded on or unloaded from a vehicle or trailer.

Use an approved trailer to transport the

 

machine. Activate the parking brake, turn off

Clean the machine regularly

8011-514

the fuel supply, and fasten the machine with

approved fastening devices, such as bands,

chains, or ropes, when transporting.

• Check and abide by local traffic regulations

before transporting or driving the machine on

any road.

IMPORTANT INFORMATION

The parking brake is not sufficient to lock the machine in place during transport. Ensure that the machine is well fastened to the transport vehicle. Reverse the machine onto the transport vehicle to avoid tipping it over.

10

Image 10
Contents Operators Manual Models ZCBI48181Good Service Contents Symbols and Decals Safety Instructions Safety InstructionsGeneral Use Personal protective equipment Driving on Slopes Do as followsChildren 8011-563 Transport Important InformationSpecifications Customer ResponsibilitiesTo Remove the Mower from Crate AssemblyTools Required For Assembly Before Removing Mower from the SkidOn position Checklist Check the Tire PressureControls OperationIZT Integraded Zeroturn TransaxleBYPASS Linkages Deck Blades HOW to USE Your MowerEngine To Adjust the Deck Cutting Height See Fig To Operate Mower To Adjust ANTI-SCALPRollers See Figure To Operate on HillsTo Transport See Fig Check Engine OIL Level Before Starting the EngineTo Start Engine See Fig ADD GasolineMowing Tips General Recommendations Maintenance ScheduleBefore Each USE Blade Care Lubrication ChartOperator Presence System TiresBattery To Sharpen Blade See FigBelts Clean AIR ScreenClean AIR INTAKE/COOLING Areas EngineEngine OIL Filter CleaningAIR Filter Spark PlugsMower Service and AdjustmentBefore Performing ANY Service or Adjustments To Level DeckFRONT-TO-BACKADJUSTMENTSee Fig To Replace Deck BeltTo Replace IZT Integraded Zeroturn Transaxle Belt See Fig To Start AN Engine with a Weak Battery To Adjust the Seat See FigTo Adjust Control Levers See Fig To Remove Wheels for RepairReplacing Battery See Fig To Attach Jumper CablesTo Adjust Park Brake Tracking AdjustmentFuel System BatteryStorage Engine OILOther CylindersTroubleshooting Points Problem Cause CorrectionProblemcausecorrection Attachment Poor cut unevenWiring Schematic Page