Yazoo/Kees ZCBI48181 manual Operation, Controls, IZT Integraded Zeroturn TransaxleBYPASS Linkages

Page 15

	OPERATION
	CONTROLS
	3	3
	1
	5
	7	8
	7	9
		CZ-5
	10
	CZ-3
	4	2
		2
	6	CZ-6
	CZ-10	CZ-6
	CZ-10

FIGURE 3

1.PTO SWITCH – Used to engage or disengage the deck blades.

2.FOOT PEDAL – Used to raise, lower and select various cutting heights of the deck.

3.CONTROL LEVERS – Sets the speed of the mower in both forward and reverse directions and turns the mower.

4.CHOKE CONTROL – Used when starting a cold engine.

5.THROTTLE CONTROL – Used to control Engine Speed.

6.IZT (Integraded Zeroturn Transaxle)BYPASS LINKAGES –

Bypasses IZT’s for pushing or pulling mower.

7.IGNITION SWITCH – Used to start or stop the engine.

8.PARKING BRAKE LEVER – Engages and disengages the park brakes.

9.TENSION RELIEF LEVER – Used to release the belt tension on the deck belt for ease in removing or replacing the belt.

10.HOUR METER – Indicates hours of operation.

15

Image 15

Contents ZCBI48181 Operators Manual ModelsGood Service Contents Symbols and Decals Safety Instructions Safety InstructionsGeneral Use Personal protective equipment Do as follows Driving on SlopesChildren 8011-563 Important Information TransportCustomer Responsibilities SpecificationsBefore Removing Mower from the Skid AssemblyTools Required For Assembly To Remove the Mower from CrateOn position Check the Tire Pressure ChecklistOperation ControlsIZT Integraded Zeroturn TransaxleBYPASS Linkages HOW to USE Your Mower Deck BladesEngine To Adjust the Deck Cutting Height See Fig To Operate on Hills To Adjust ANTI-SCALPRollers See Figure To Operate MowerTo Transport See Fig ADD Gasoline Before Starting the EngineTo Start Engine See Fig Check Engine OIL LevelMowing Tips Maintenance Schedule General RecommendationsBefore Each USE Tires Lubrication ChartOperator Presence System Blade CareTo Sharpen Blade See Fig BatteryEngine Clean AIR ScreenClean AIR INTAKE/COOLING Areas BeltsSpark Plugs CleaningAIR Filter Engine OIL FilterTo Level Deck Service and AdjustmentBefore Performing ANY Service or Adjustments MowerTo Replace Deck Belt FRONT-TO-BACKADJUSTMENTSee FigTo Replace IZT Integraded Zeroturn Transaxle Belt See Fig To Remove Wheels for Repair To Adjust the Seat See FigTo Adjust Control Levers See Fig To Start AN Engine with a Weak BatteryTo Attach Jumper Cables Replacing Battery See FigTracking Adjustment To Adjust Park BrakeEngine OIL BatteryStorage Fuel SystemCylinders OtherProblem Cause Correction Troubleshooting PointsAttachment Poor cut uneven ProblemcausecorrectionWiring Schematic Page