Shindaiwa 81719, LE2510 manual Product Description, Specifications, Prior to Assembly

Product Description

Using the accompanying illustrations as a guide, familiarize yourself with this unit and its various components. See Figure 4. Understanding your unit helps ensure top performance, long service life, and safer operation.

WARNING!

Do not make unauthorized

modifications or alterations to any of

these units or their components.

IMPORTANT!

The terms “left”, “left-hand”, and “LH”; “right”, “right-hand”, and “RH”; “front” and “rear” refer to directions as viewed by the operator during normal operation.

Prior to Assembly

Before assembling, make sure you have all the components required for a complete unit:

Engine and outer tube assembly with handle

Gearcase assembly

Kit containing this manual and tool kit for routine maintenance. Tool kits vary by model and may include a hex wrench, spark plug/screwdriver combination wrench, and spanner wrench.

Carefully inspect all components for damage.

Specifications

LE2510 LAWN EDGER

Ignition Throttle

Switch Interlock Grip

CuttingHandle

Attachment Shield

Outer Tube		Fuel
	Throttle	Tank
	Trigger

Cutting Gear case

Attachment

Figure 4

LE2510 dry weight
(Including attachments)	13.4 lb./6.1 kg
Engine model .SF2510E
Engine type	with Power Boost Chamber
Bore x stroke	1.3 x 1.1 in./34 x27 mm
Displacement	1.5 cu. in./ 24.5 cc
Maximum power	1.1 HP/0.8 kW
	@ 7500 rpm (min-1)
Fuel/oil ratio	50:1 with ISO-L-EGD or JASO FC
	class 2-cycle mixing oil*
Carburetor type	Walbro WYL, diaphragm-type
Fuel tank capacity	20.0 oz./590 ml
Ignition	One-piece electronic,
	program contolled

Spark plug		NGK CMR5H
Air cleaner type		Non-reversible heavy-duty
		filter element
Starting method		Recoil
Stopping method		Slide switch
Transmission type	Automatic, centrifugal clutch
		w/bevel gear
EPA Emission Compliance Period**		.............................Category A

**The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category

C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended).

*meets or exceeds these specifications and is recommended for

all Shindaiwa products.

Specifications are subject to change without notice.