Single Line Installation, SplitLine Installation

MTD MT700 manual Single Line Installation, SplitLine Installation

MAINTENANCE AND REPAIR INSTRUCTIONS

For Use with Single	For Use with SplitLine™
Line ONLY	or Single Line
	Slotted
	Holes

Fig. 15

NOTE: SplitLine™ can only be used with the inner reel with the slotted holes. Single line can be used on either type of inner reel. Use Figure 15 to identify the inner reel you have.

NOTE: Always use the correct line length when installing trimming line on the unit. The line may not release properly if the line is too long.

Loop

Fig. 16

Single Line Installation

Go To Step 8 for SplitLine™ Installation

6.Take approximately 20 feet (6 m) of new trimming line, loop it into two equal lengths. Insert each end of the line through one of the two holes in the inner reel (Fig. 16). Pull the line through the inner reel so that the loop is as small as possible.

7.Wind the lines in tight even layers, onto the reel (Fig. 17). Wind the line in the direction indicated on the inner reel. Place your index finger between the two lines to stop the lines from overlapping. Do not overlap the ends of the line. Proceed to step 11.

Fig. 17

SplitLine™ Installation

8.Take approximately 10 feet (3 m) of new trimming line. Insert one end of the line through one of the two holes in the inner reel (Fig. 18). Pull the line through the inner reel until only about 4 inches is left out.

9.Insert the end of the line into the open hole in the inner reel and pull the line tight to make the loop as small as possible (Fig. 18).

10.Before winding, split the line back about 6 inches.

11.Wind the line in tight even layers in the direction indicated on the inner reel.

NOTE: Failure to wind the line in the direction indicated will cause the cutting attachment to operate incorrectly.

Loop

Fig. 18

12.Insert the ends of the line into the two holding slots (Fig. 19).

13.Insert the ends of the line through the eyelets in the outer spool and place inner reel with spring inside the outer spool (Fig. 20). Push the inner reel and outer spool together. While holding the inner reel and outer spool, grasp the ends and pull firmly to release the line from the holding slots in the reel.

Holding Slots

Fig. 19

NOTE: The spring must be assembled on the inner reel before reassembling the cutting attachment.

14.Hold the inner reel in place and install the bump knob by turning clockwise. Tighten securely.

Spring

Fig. 20

MT700 specifications

The MTD MT700 is a highly sophisticated tractor designed to meet the demands of modern agriculture. Its advanced engineering showcases a blend of power, efficiency, and flexibility, making it a valuable asset for farmers and agricultural professionals.

One of the standout features of the MTD MT700 is its powerful engine. Equipped with a robust powertrain, the MT700 delivers impressive horsepower, providing operators with the capability to tackle heavy workloads and challenging terrains. This reliability ensures that farmers can depend on the tractor for at various tasks such as plowing, tilling, and hauling.

The MT700 incorporates cutting-edge technology to enhance performance and operational efficiency. It features a highly responsive hydrostatic transmission, allowing for smooth acceleration and deceleration. This transmission system enables operators to maintain precise control over speed and torque, essential for various farming applications. Moreover, the tractor's intuitive control system streamlines operation, reducing the learning curve for new users and increasing productivity.

A notable characteristic of the MT700 is its innovative design aimed at comfort and convenience. The spacious cab is ergonomically designed with user-friendly controls and ample visibility, allowing operators to work long hours without fatigue. The climate-controlled environment ensures comfort regardless of external conditions, which is crucial for prolonged operations in the field.

Additionally, the MT700 is designed for versatility. Its mounting system accommodates a wide range of implements, from seeders to mowers, making it suitable for various agricultural tasks. This adaptability further enhances its utility on diverse farms.

Furthermore, the MTD MT700 is built with durability in mind. Constructed with high-quality materials and components, it withstands the rigors of demanding agricultural operations. The tractor's maintenance-friendly design facilitates easy servicing, ensuring that it remains in optimal working condition year-round.

In summary, the MTD MT700 tractor represents the pinnacle of agricultural engineering, combining powerful performance, advanced technologies, and user-centric design. Farmers and agricultural professionals can rely on this tractor to enhance productivity and efficiency, making it an essential tool in modern farming operations. With its impressive features and capabilities, the MTD MT700 is poised to transform the way agriculture is conducted, setting new standards in the industry.