ENGLISH
NAMES AND FUNCTIONS OF PARTS
FRONT PANEL
!1!0o | i | u yt |
| DISPLAY | ATT. |
|
|
| PHONO |
|
| TONE | MC |
|
|
| OPERATE |
|
|
| POWER ON/OFF |
|
| PHONES | PHONES |
|
INPUT SELECTOR | OUT | PRE OUT | VOLUME |
!2!3
qPOWER ON/OFF Switch
This switch turns power to the unit ON and OFF. When pressed, power is activated and the blue indicator in the display w lights up. Pressing the switch again turns the power OFF.
wDisplay
Indicate the selected input source, volume level, and setting status.
q w e | r |
uATT. Button
This button attenuates the volume with one press of the button. For instructions on How to Set the Attenuation Level, see page. 21.
iIllumination Lamp
The illumination lamp casts a blue light over the switches and buttons. It can be turned ON and OFF with the DISPLAY button. For instructions on HOW TO OPERATE THE SIDE ILLUMINATION, see page. 24.
eInfrared Receptor Window
This receptor window receives control signals sent from the included remote controller.
rVOLUME Knob
This knob is for setting the volume. The volume level is displayed on the display w. When turned slowly, the volume can be
tPRE OUT Button
This buttons turns output from the PRE OUT jack and BALANCED PREOUT jack on the rear panel ON and OFF. When using just the headphones, switch this button OFF.
oDISPLAY Button
This button turns the display and side illumination ON and OFF. For instructions on HOW TO OPERATE THE SIDE ILLUMINATION, see page. 24.
!0TONE Button
This button turns the bass and treble tone control ON and OFF. For instructions on How to Trim Bass and Treble, see page. 23. If pressed and held for 2 seconds or longer, this button switches the subsonic filter ON/OFF. For details on SUBSONIC FILTER, see page 21.
!1PHONES OUT Button
This button switches the headphone jack output signal ON/OFF. Set this to OFF when not in use.
yPHONO MC Button
This button switches the Phono equalizer amplifier setting between MC and MM. Set the phono equalizer amplifi er according to the type of cartridge you use.
!2INPUT SELECTOR Knob
This knob is for selecting the input source to use in playback and recording. The selected input source is displayed in the display w.
!3PHONES Jack
This jack is for connecting headphones with a standard stereo plug.
6