Marantz Model SC-11S1 Remote Power Control, Do not use connecting cables that contain resistance

HOW TO USE AND SET FEATURES

REMOTE POWER CONTROL

By connecting this unit to a Marantz SM-11S1 stereo power amplifier by remote power control, the power supply of the SM-11S1 can be automatically switched ON/OFF in sync with this unit’s power ON/OFF control. There are 2 trigger output terminals on this unit, and a maximum of 2 SM-11S1s can be controlled in sync with this unit’s power ON/OFF control.

1.Prepare the correct number of double-ended mini plug audio connection cables for the number of SM-11S1s to be connected. Either of the following types of connection cables are adequate.

¶Monaural miniplug ⇔ monaural miniplug connecting cable

¶Stereo miniplug ⇔ stereo miniplug connecting cable

2.After completing the connections shown below, switch the remote power control ON/OFF switch on the rear panel of the SM-11S1 to ON.

3.Press the SM-11S1 POWER ON/OFF switch to switch to standby mode.

4.In this condition, press the POWER ON/OFF switch on this unit, and the power of the SM-11S1 will switch ON in sync.

Notes:

•The SM-11S1 cannot be controlled if the SM-11S1 remote power control switch is OFF.

•When the power for this unit is switched ON or OFF, control sync signals are output from TRIGGER OUT 1 and 2.

(However, the TRIGGER OUT 2 power ON control signal is output approximately 1 second after the TRIGGER OUT 1 power On control signal output.) )

ENGLISH

Note:

Do not use connecting cables that contain resistance.

SC-11S1

AC IN

TRIGGER OUT

1 2

REMOTE POWER CONTROL

SM-11S1

AC IN

REMOTE POWER CONTROL

TRIGGER IN	ON
	OFF

SM-11S1

AC IN

REMOTE POWER CONTROL

TRIGGER IN	ON
	OFF

TRIGGER OUT

1 2

REMOTE POWER CONTROL

REMOTE POWER CONTROL

ON

OFF

TRIGGER IN

Set to ON

REMOTE POWER CONTROL

ON

OFF

TRIGGER IN

Set to ON

25