ENGLISH | HOW TO USE AND SET FEATURES |
|
TRIMMING
There are three trimming modes.
•LEVEL trimming that adjusts the volume level on left and right channels
•BASS trimming that adjusts the bass on left and right channels
•TREBLE trimming that adjusts the treble on left and right channels
Note:
Trimming is performed from the remote controller.
TRIM | : This button starts trimming.When multiple |
| are connected, this button selects the amplifier with |
| which to perform trimming. In such case, trimming |
| is performed in the order of the lowest to highest ID |
| number. |
EXIT | : This button ends trimming. |
3: This button increases the trimming level.
4: This button decreases the trimming level.
2: This button selects the R channel for trimming.
1: This button selects the L channel for trimming.
ENTER : This button selects the trim mode (LEVEL, BASS or TREBLE).
OPEN/ |
| SOUND |
CLOSE |
| MODE |
PHONO | BALANCED | CD |
RECORDER 1 |
| LINE 1 |
RECORDER 2 |
| LINE 2 |
TRIM | EXIT | TONE |
TRIM | + |
|
EXIT |
| |
|
| |
L |
| R |
ENTER3, 4, 2, 1
DISPLAY | - | ATT |
VOLUME
RANDOM | SCAN | REPEAT |
TOP MENU | RETURN | MENU |
AM/A | FM/B |
|
7How to Trim Volume Level
The volume level of the left and right channels can be trimmed in 0.5dB steps across a 0.0 – 9.0dB range. When the unit is shipped from the factory, the volume level is set to 0.0dB (maximum).
1.Press the TRIM button once to access the LEVEL trimming mode.
2.The flashing “0.0” on the left indicates that trimming is activated for the left channel volume level. Press the 3 and 4 buttons to set the volume level of the left channel.
3.Press the 2 button to set the right channel volume level. When the right side “0.0” starts flashing, trimming is activated for the right channel volume level. Press the 3 and 4 buttons to set the volume level of the right channel.
4.To trim the volume level of the ID 2 (slave) unit, press the TRIM button again and set the volume level as in steps 1~3. After that, pressing the TRIM button again allows you to trim the volume level for the “ID 3” unit and so forth.
5.When finished with volume level trimming, press the EXIT button.
22