Marantz Model SC-11S1 manual 4Power Indicator, 5Display Panel, 6OPERATE Indicator

Page 13

NAMES AND FUNCTIONS OF PARTS

DISPLAY

!4

!5

OPERATE	!6

!4Power Indicator

This indicator is lit a blue color while power to the unit is ON.

!5Display Panel

Approximately 3 seconds after the power to the unit is activated, the ID number is displayed here.

After that, the top line displays the selected input source, and the bottom line displays the volume level. The volume attenuation (dB units) is displayed.

ENGLISH

VOLUME Indicator Volume Display

Max

Turn the VOLUME knob on the unit to the right, or press the VOLUME 5 button on the remote controller.

0.5dB Steps

Turn the VOLUME knob on the unit to the left, or press the VOLUME ∞ button on the remote controller.

Min

The display also displays the setting values when adjusting the left-right level balance. For instructions on How to Trim Volume Level, see page. 22. Other messages that correspond to various operations are also displayed.

!6OPERATE Indicator

This indicator ﬂ ashes the operating status of the unit. When the ID is set to “0” for standalone operation, it is lit a red color. When multiple ampliﬁ ers are connected by F.C.B.S., only ID number “1” for the master is lit red color. The slave ampliﬁ er whose indicator does not light a red color cannot be used to operate other units in sync.

For more information on F.C.B.S., see page. 26. The indicator ﬂ ashes red if a protective circuit trips.

7

Image 13

Contents Model SC-11S1 User Guide Risk of Electric Shock Do not Open Do not touch hot spots during and immediately after use Additional Safety InformationEnglish CE Marking Waarschuwingen Remote controller Checking the accessoriesContents Features Equipment Mains Working Setting Before UsingInappropriate Places for Installation CopyrightLoading batteries PrecautionsOperational range Front Panel Names and Functions of Parts6OPERATE Indicator 4Power IndicatorDisplay 5Display PanelRemote Power Control Jack Phono GND Terminal AC in Power Cable Connection SocketAMP Mode Switch Phono Input JacksRemote Controller ¶ Remote Controller Operation for Marantz DVD ¶ Remote Controller Operation for MarantzSuper Audio CD Players Balanced Jacks ConnectionsSC-11S1 Connection Example with Input Source ComponentsSC-11S1 Connection example to power amplifier¶ About Complete Bi-Amp Connection Example 2 Stereo Complete Bi-amp ConnectionSC-11S1 for L ch Ch for SM-11S1SC-11S1 for R ch CD PlayerFor front L/R SM-11S1 For front L/RFor center/ subwoofer Super Audio CD Multi-channel PlayerFor center SM-11S1 For surround L/R SM-11S1 For surround L/R¶ ITU International Telecommunication Union Connecting the Power SupplyPlayback Basic OperationDisc Playback on a Super Audio CD Player Disc Playback on an Analog Record PlayerHow to Set Attenuation Level HOW to USE and SET FeaturesATT. Attenuation Subsonic Filter Tone buttonTrimming How to Trim Volume LevelHow to Trim Treble How to Trim BassBI-AMP Mode HOW to Operate the Side IlluminationDisplay button Do not use connecting cables that contain resistance Remote Power ControlB.S Input Selector Power ON/OFF Switch Knob HOW to SET ID NumbersError Messages TroubleshootingProtective Circuits ¶ Dimensions Unit mm inch Specifications & Dimensional DrawingsOthers Cleaning of equipment external surfacesRepairs 09/2007 00M22AJ851310 mzh-g