Marantz Model SC-11S1 manual HOW to SET ID Numbers, Input Selector Power ON/OFF Switch Knob

Page 33

HOW TO USE AND SET FEATURES

HOW TO SET ID NUMBERS

If using this unit by itself as a stereo amplifier, set the ID number to “0” (Default setting is “0”).

Note:

If the ID number is set to a number other than “0”, this unit cannot be used for standalone operation.

The ID number of the unit appears on the display for about 3 seconds after the power is activated.

When multiple SC-11S1s are connected, a unique ID number must be set of each one in order to distinguish between them.

The unit that centrally controls the other units takes ID 1. The unit with ID1 is called the “Master”. The other units that synchronize with the master are called “slaves” and take IDs “2” ~ “4”.

ENGLISH

DISPLAY button

	DISPLAY	ATT.
		PHONO
	TONE	MC
		POWER ON/OFF
INPUT SELECTOR	PHONES	PHONES	VOLUME
INPUT SELECTOR	OUT	PRE OUT	VOLUME

INPUT SELECTOR POWER ON/OFF Switch Knob

Set ID numbers as follows.

1.While pressing and holding the DISPLAY button, press the POWER ON/OFF switch.

2.Turn the INPUT SELECTOR knob to the desired ID number.

After finishing setting the ID number, turn power to the unit OFF.

The setting is stored in memory and becomes active the next time power to the unit is switched ON.

27

Image 33

Contents Model SC-11S1 User Guide Risk of Electric Shock Do not Open Do not touch hot spots during and immediately after use Additional Safety InformationEnglish CE Marking Waarschuwingen Remote controller Checking the accessoriesContents Features Equipment Mains Working Setting Before UsingInappropriate Places for Installation CopyrightPrecautions Loading batteriesOperational range Front Panel Names and Functions of Parts6OPERATE Indicator 4Power IndicatorDisplay 5Display PanelRemote Power Control Jack Phono GND Terminal AC in Power Cable Connection SocketAMP Mode Switch Phono Input JacksRemote Controller ¶ Remote Controller Operation for Marantz ¶ Remote Controller Operation for Marantz DVDSuper Audio CD Players Balanced Jacks ConnectionsSC-11S1 Connection Example with Input Source ComponentsSC-11S1 Connection example to power amplifier¶ About Complete Bi-Amp Connection Example 2 Stereo Complete Bi-amp ConnectionSC-11S1 for L ch Ch for SM-11S1SC-11S1 for R ch CD PlayerFor front L/R SM-11S1 For front L/RSuper Audio CD Multi-channel Player For center/ subwooferFor center SM-11S1 For surround L/R SM-11S1 For surround L/R¶ ITU International Telecommunication Union Connecting the Power SupplyPlayback Basic OperationDisc Playback on a Super Audio CD Player Disc Playback on an Analog Record PlayerHow to Set Attenuation Level HOW to USE and SET FeaturesATT. Attenuation Subsonic Filter Tone buttonTrimming How to Trim Volume LevelHow to Trim Treble How to Trim BassHOW to Operate the Side Illumination BI-AMP ModeDisplay button Do not use connecting cables that contain resistance Remote Power ControlB.S Input Selector Power ON/OFF Switch Knob HOW to SET ID NumbersTroubleshooting Error MessagesProtective Circuits ¶ Dimensions Unit mm inch Specifications & Dimensional DrawingsCleaning of equipment external surfaces OthersRepairs 09/2007 00M22AJ851310 mzh-g